{"product_id":"picobnc-nvh-1-channel-starter-kit-with-case-pq427","title":"PicoBNC+ NVH 1-Channel Starter Kit with Case PQ427","description":"\u003cp\u003eThe new PicoBNC+ NVH probes introduce a game-changing capacity to simultaneously\u003cbr\u003ecapture all three outputs from the triaxial (fore-aft, lateral, and vertical) accelerometer on one\u003cbr\u003ePicoScope channel. In addition, technicians have the option to switch between the probe’s\u003cbr\u003eaxis modes within the software without changing probe connections. This reduces the\u003cbr\u003echannels needed for all 3 axes of one accelerometer from three to one, which increases the\u003cbr\u003etool’s measurement flexibility and the diagnostic test scenarios to which it can be applied.\u003cbr\u003eThis ability to multiplex multiple signals through a single scope channel is only possible with\u003cbr\u003ethe PicoBNC+ interface, which is why the new system is not available in BNC format.\u003cbr\u003eEach new PicoBNC+ NVH probe requires only one connection directly into any PicoBNC+\u003cbr\u003eAutomotive Scope without the need for the NVH Interface, eliminating batteries. There is a new PicoBNC+ extension\u003cbr\u003elead that can be used with the microphone and accelerometer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003eFaster set-up. Fewer test cycles. Better results.\u003cbr\u003eEvery vibration has a frequency. That frequency tells you the source. The software does the matching — you get a straight answer.\u003c\/p\u003e\n\u003cp\u003eTwelve axes:  Four corners, one test\u003cbr\u003eEach three-axis accelerometer captures fore-aft, lateral, and vertical vibration through a single PicoScope channel. Four accelerometers on a four-channel scope covers every corner of the vehicle in one road test. Previously, this required multiple passes with reconfiguration between each.\u003cbr\u003e \u003cbr\u003eSimple connection: Easy setup\u003cbr\u003eThe PicoBNC+ NVH setup from Pico requires no additional leads or boxes. Simply plug the lead into one of the BNC+ ports of the PicoScope osilloscope and you're ready to test.\u003cbr\u003e \u003cbr\u003eZero config: Plug in, start testing\u003cbr\u003ePicoBNC+ automatic probe recognition means the software identifies each probe on connection and applies correct settings. No manual entry of probe type or sensitivity values. One less step to get wrong, one fewer source of unreliable results.\u003cbr\u003e \u003cbr\u003eNo battery: Always ready\u003cbr\u003ePicoBNC+ NVH probes are battery-free. No dead CR123 cells before a road test. No replacement stock to manage. No servicing downtime. The probe is ready when you are.\u003cbr\u003e \u003cbr\u003eNo registration: No activation codes\u003cbr\u003eUse straight out of the box with any automotive PicoBNC+ PicoScope.\u003c\/p\u003e\n\u003cp\u003eSpeed and RPM measurements can be added to the analysis, additional hardware required and sold separately.\u003c\/p\u003e\n\u003cp\u003eThe NVH Diagnostic STARTER Kit provides you with the hardware needed to your use PicoScope for Noise, Vibration and Harshness (NVH) analysis. If your customer can feel it or hear it, you can find it:\u003cbr\u003e• Cabin vibrations at speed\u003cbr\u003e• Engine vibrations throughout the entire rev range\u003cbr\u003e• Clutch judder\/vibration\u003cbr\u003e• Transmission and bearing whine\u003cbr\u003e• Auxiliary drive noise\u003cbr\u003e• Brake judder\u003cbr\u003e• Steering vibrations\u003c\/p\u003e\n\u003cp\u003eAnalysis files can be recorded for playback, saved for future reference, and printed to help explain the diagnosis and repair to your customer.\u003c\/p\u003e\n\u003cp\u003eRequirements to run Pico NVH\u003cbr\u003eThe NVH interface unit connects to your Automotive PicoScope (sold separately) via a BNC cable and uses the free PicoDiagnostics NVH software.\u003c\/p\u003e\n\u003cp\u003eRequired hardware: 4-channel PicoScope 4225A or 4425A Picoscope only\u003c\/p\u003e\n\u003cp\u003eRequired software: Windows 11 and 10 (all 64-bit only)\u003c\/p\u003e\n\u003cp\u003eOptional hardware for live RPM readings:\u003cbr\u003e- J2534 Scan Tool or VCI (not included) or Elm327.\u003cbr\u003e- Synch probe such as the Inductive Pickup Probe.\u003cbr\u003eThe software also lets you enter a static RPM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003cbr\u003e1 - TA573 PicoBNC+ Standard NVH Accelerometer\u003cbr\u003e1 - TA572 PicoBNC+ Standard NVH Microphone\u003cbr\u003e1 - TA574 PICOBNC+ Extension Cable\u003cbr\u003e1 - TA096 Mounting magnet for accelerometer\u003cbr\u003e1 - Carry Case\u003cbr\u003e1 - Year Warranty\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":53296672506169,"sku":"pt-PQ427","price":789.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/PQ427PicoBNC_1-ChannelNVHStarterkitwithcase.webp?v=1778777371","url":"https:\/\/shop.aeswave.com\/products\/picobnc-nvh-1-channel-starter-kit-with-case-pq427","provider":"AESwave","version":"1.0","type":"link"}