{"title":"Pico Technology","description":"","products":[{"product_id":"mixmaster-12-channel-automotive-signal-mixer","title":"Mixmaster 12-Channel Automotive Signal Mixer","description":"\u003cp\u003e(AES# pt-PP361)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNow you can see a twelve-cylinder secondary ignition parade on your Pico Scope. Mixmaster can produce a parade display of up to twelve cylinders using a single channel of your Pico Scope. If you have a two-channel or four-channel Pico Scope the Mixmaster will also display two engine banks separately with up to six cylinders per bank.\u003c\/p\u003e\n\u003cp\u003ePico Mixmaster is battery-powered, rugged and conveniently portable. It is supplied with a set of four secondary ignition leads, three BNC leads to connect to the oscilloscope, and an engine-block ground lead. It has a trigger output to help synchronise the scope to a known cylinder, and a switch to deal with negative-going wasted-spark signals. There's no software to install, and it works with PicoScope or any other automotive oscilloscope program.\u003c\/p\u003e\n\n\u003cp\u003eIgnition parade waveforms from a wasted spark ignition system\u003c\/p\u003e\n\u003cp\u003eThe MixMaster separates the power and spark onto separate channels.\u003c\/p\u003e\n  \n\n\u003cp\u003eMixMaster Contents\u003cbr\u003e• Pico Mixmaster base unit with holster boot\u003cbr\u003e• Ground Lead (14-1\/2 inches long)\u003cbr\u003e• 4 Secondary Pickup leads (35 inches long) *\u003cbr\u003e• 3 BNC leads (4-ft long) to connect to scope module\u003cbr\u003e• User Guide\u003cbr\u003e\u003cbr\u003e* You can purchase extra sets of secondary pickup leads for use with up to 12\u003cbr\u003echannels. \u003ca href=\"http:\/\/www.aeswave.com\/Mixmaster-HT-pick-up-lead-set-4-leads-p8766.html\"\u003eClick here for set of 4 leads!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSystem Requirements\u003cbr\u003eThe Pico Mixmaster is designed to operate with any Pico Scope.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667136700729,"sku":"pt-PP361","price":454.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/10324.jpg?v=1697100728"},{"product_id":"secondary-ignition-pickup-mi074","title":"Secondary Ignition Pickup (MI074)","description":"\u003cp\u003eDue to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection; attempting to make a direct connection without attenuation can and will damage the measuring instrument.\u003c\/p\u003e\n\u003cp\u003eThe Pico PP178 is a capacitive pickup that connects around the insulation of an ignition circuit component such as a plug wire avoiding the need for direct connection.\u003c\/p\u003e\n\u003cp\u003eAttenuated 10,000:1.\u003c\/p\u003e\n\u003cp\u003eFor...\u003cbr\u003e\u003cstrong\u003eStandard Ignition: \u003c\/strong\u003eclip the pickup around the coil wire (or one plug wire at a time)\u003cbr\u003e\u003cstrong\u003eIntegrated coil: \u003c\/strong\u003eclip the pickup around the central location on the distributor cap\u003cbr\u003e\u003cstrong\u003eDIS: \u003c\/strong\u003eclip the pickup around one plug wire at a time\u003cbr\u003e\u003cstrong\u003eCOP: \u003c\/strong\u003eclip the pickup around an \u003ca href=\"http:\/\/www.aeswave.com\/Coil-on-Plug-HT-Extension-Lead-Set-of-4-p8937.html\"\u003eHT extension lead\u003c\/a\u003e between the coil pack and the plug\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667140403513,"sku":"pt-PP178","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Secondary_Ignition_Pickup__MI074__pt-PP178_1.webp?v=1744226572"},{"product_id":"mixmaster-ht-pick-up-lead-set-4-leads","title":"Mixmaster HT pick-up lead set. 4 leads","description":"\u003cp\u003eExtra set of four secondary leads for use with the Pico Mixmaster.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667141681465,"sku":"pt-PP339","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Mixmaster_HT_pick-up_lead_set._4_leads_pt-PP339_1.webp?v=1744226576"},{"product_id":"coil-on-plug-ht-extension-lead-set-of-4","title":"Coil-on-Plug HT Extension Lead - Set of 4","description":"\u003cp\u003eCoil-on-Plug extension leads are designed to aid diagnostics on secondary ignition circuits by allowing an HT measurement to be made when there are no, or limited access, to any spark plug leads.\u003c\/p\u003e\n\u003cp\u003eThe leads are specifically designed to be used with capacitive-type secondary pickups.\u003c\/p\u003e\n\u003cp\u003eEasy to use: simply fit them between the coil pack and the plugs, place a capacitive secondary ignition pickup on each lead, and your lab scope will show accurate ignition waveforms with correct kV measurements.\u003c\/p\u003e\n\u003cp\u003eThe Coil-on-Plug Extension Leads are capable of displaying ignition patterns from most any lab scope, including those from Pico, Snap-on, OTC, Bosch, Fluke etc...\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eContents\u003c\/b\u003e\u003cbr\u003e4 @ Coil-On-Plug Extension Lead\u003cbr\u003e1 @ Ground\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667151642937,"sku":"pt-PP400","price":202.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Coil-on-Plug_HT_Extension_Lead_-_Set_of_4_pt-PP400_1.webp?v=1744226608"},{"product_id":"coil-on-plug-ht-extension-lead","title":"Coil-On-Plug HT Extension Lead","description":"\u003cp\u003eCoil-on-Plug extension leads are designed to aid diagnostics on secondary ignition circuits by allowing an HT measurement to be made when there are no, or limited access, to any spark plug leads.\u003c\/p\u003e\n\u003cp\u003eThe leads are specifically designed to be used with capacitive-type secondary pickups.\u003c\/p\u003e\n\u003cp\u003eEasy to use: simply fit them between the coil pack and the plugs, place a capacitive secondary ignition pickup on each lead, and your lab scope will show accurate ignition waveforms with correct kV measurements.\u003c\/p\u003e\n\u003cp\u003eThe Coil-on-Plug Extension Leads are capable of displaying ignition patterns from most any lab scope, including those from Pico, Snap-on, OTC, Bosch, Fluke etc...\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eContents\u003c\/b\u003e\u003cbr\u003e1 @ Coil-On-Plug Extension Lead\u003cbr\u003e1 @ Ground\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667192504633,"sku":"pt-PP399","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Coil-On-Plug_HT_Extension_Lead_pt-PP399_1.webp?v=1744228289"},{"product_id":"2000a-200a-current-clamp","title":"2000A\/200A Current Clamp","description":"\u003cp\u003eThe 2000A\/200A (TA167) heavy duty current clamp from Pico features additional screening to reduce noise pickup and uses advanced Hall Effect sensors for improved sensitivity and high external field rejection.\u003c\/p\u003e\n\u003cdiv\u003eUse it for starter motor testing of commercial vehicles and large engine passenger cars.\u003c\/div\u003e\n\u003cp\u003eCompared to the Pico PP266 (600A), and Pico PP253 (2000A) clamps, the TA167 has improved sensitivity, lower noise, faster response, an improved jaw size, and in the 200A mode the TA167 offers better performance at lower currents.\u003c\/p\u003e\n\u003cp\u003eThe TA167 uses a 9 V Alkaline battery and features an auto power-down facility to save battery life when not in use (this feature can be disabled for battery drain \/ shutdown current testing).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTypical Uses\u003c\/strong\u003e\u003cbr\u003eThe wide range of this clamp allows currents to be measured from under 1 amp right up to 2000 amps. It can therefore be used with a PicoScope (and other scopes) for many applications including:\u003cbr\u003e- Battery testing with PicoDiagnostics software\u003cbr\u003e- Relative compression testing\u003cbr\u003e- Starter motor testing\u003cbr\u003e- Alternator output testing\u003cbr\u003e- Hybrid and EV electric motor current\u003cbr\u003eOn the 200 A range the TA167 can also be used for such as checking injector and ignition current.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667218784569,"sku":"pt-TA167","price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/15766.jpg?v=1689076314"},{"product_id":"s-hook","title":"S Hook","description":"\u003cp\u003eThis small but essential accessory makes it easy to keep all those test leads tidy in the engine bay.\u003c\/p\u003e\n\u003cp\u003eThe S-hook is about 100 mm (4 in) long and coated in plastic and rubber to protect the vehicle's paintwork and your cables. Hook one end underneath the bonnet or hood, and use the other end to hang a bundle of cables up to about 25 mm (1 in) thick.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667223044409,"sku":"pt-MI168","price":4.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/S_Hook_pt-MI168_1.webp?v=1744228341"},{"product_id":"wps500x-pressure-transducer-kit","title":"WPS500X Pressure Transducer Kit","description":"\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eCurrently backordered.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eDesigned to offer uncompromising resolution and accuracy, the Pico automotive diagnostic pressure transducer allows quick and accurate pressure analysis of many automotive systems, with:\u003cbr\u003e* three pressure ranges\u003cbr\u003e* a zoom tool\u003cbr\u003e* integrated bleed-off \/ pressure relief valve\u003c\/p\u003e\n\u003cp\u003eAccurately measure pressure to 500psi\u003c\/p\u003e\n\u003cp\u003eUltra fast 100\u003cspan style=\"color: rgb(0, 0, 0); line-height: 19.2px; font-family: sans-serif; font-size: 13px;\"\u003eμ\u003c\/span\u003eS response time\u003c\/p\u003e\n\u003cp\u003eZoom feature for enhanced analysis capabilities\u003c\/p\u003e\n\u003cp\u003eRechargeable Li-PO battery\u003c\/p\u003e\n\u003cp\u003eIntegrated pressure relief \/ bleed-off valve\u003c\/p\u003e\n\u003cp\u003eAuto Zeroing\u003c\/p\u003e\n\u003cp\u003eHigh noise immunity\u003c\/p\u003e\n\u003cp\u003eTemperature compensated\u003c\/p\u003e\n\u003cp\u003eThis unit is an auto zeroing pressure transducer designed to offer form and flexibility to automotive diagnostics.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat Lab Scopes does the WPS500X Transducer work with?\u003c\/b\u003e\u003cbr\u003eThe Pico WPS500X Transducer works with all modern automotive and industrial lab scopes, including, but not limited to: PicoScope, Snap-on scopes, Fluke ScopeMeters, Bosch scopes, etc... However, lab scopes with banana inputs require a \u003ca href=\"http:\/\/www.aeswave.com\/AES-Flexible-Adapter-Banana-Plugs-to-BNC-Male-p8956.html\"\u003ebanana to BNC Male adapter\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePP939 Kit Contents \u003c\/strong\u003e(\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_16752.jpg?v=1689076355?1598388149\"\u003ePP939 Contents\u003c\/a\u003e)\u003cbr\u003e• WPS500X pressure transducer\u003cbr\u003e• Carry case\u003cbr\u003e• USB cable\u003cbr\u003e• 16FT BNC to BNC cable\u003cbr\u003e• TA083: Fuel hose with large Schrader valve\u003cbr\u003e• TA117: Fuel hose with small Schrader valve\u003cbr\u003e• TA085: Vacuum hose\u003cbr\u003e• TA086: Bleed hose\u003cbr\u003e• TA087: Exhaust adapter\u003cbr\u003e• TA142: spare Foster series 2 quick coupler\u003cbr\u003e• TA212: Standard compression hose for WPS\u003cbr\u003e• TA213: Adaptor M10 short reach\u003cbr\u003e• TA216: Adaptor M12 deep reach\u003cbr\u003e• TA217: Adaptor M14 short reach\u003cbr\u003e• TA218: Adaptor M14 Deep reach\u003cbr\u003e• TA129: Universal vacuum adaptor\u003c\/p\u003e\n\u003cp\u003eAdditional adapters are included with the \u003ca href=\"https:\/\/www.aeswave.com\/WPS500X-Maxi-Transducer-Kit-with-carry-case-p9498.html\"\u003eMaxi Kit\u003c\/a\u003e and are available \u003ca href=\"https:\/\/www.aeswave.com\/universal-compression-hose-high-strength-p9307.html\"\u003eseparately\u003c\/a\u003e:\u003cbr\u003e- M10 (10mm) deep reach\u003cbr\u003e- M16 (16mm) for Ford triton style engines\u003cbr\u003e- M18 (18mm) for older engines\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWPS and PicoScope Automotive 7 beta software with Phase Rulers and Cursors...\u003c\/strong\u003e\u003cbr\u003e\u003ciframe height=\"337\" src=\"https:\/\/player.vimeo.com\/video\/496473964\" title=\"vimeo-player\" width=\"599\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667225403705,"sku":"pt-PP939","price":1339.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/WPS500X_Pressure_Transducer_Kit_pt-PP939_1.webp?v=1744230277"},{"product_id":"jcase-fuse-extension-lead","title":"JCASE Fuse Extension Lead","description":"\u003cp\u003eThe Pico TA168 JCASE fuse extension lead is designed to be used with standard and low profile JCASE fuses.\u003c\/p\u003e\n\u003cp\u003eJCASE is a cartridge style fuse with female terminal design, providing both increased time delay and low voltage drop to protect high current circuits \u0026amp; handle inrush currents.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667225469241,"sku":"PT-TA168","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/JCASE_Fuse_Extension_Lead_PT-TA168_1.webp?v=1744229998"},{"product_id":"maxi-fuse-extension-lead","title":"Maxi Fuse Extension Lead","description":"\u003cp\u003eDo you need to measure the current through a circuit but cannot find anywhere on the vehicle where you can connect your current clamp?\u003cbr\u003e\u003cbr\u003ethe Pico TA206 maxi fuse extension lead is designed to be used with standard and maxi automotive fuses. The maxi fuse is a large blade-style fuse used to protect high-current circuits and handle large inrush currents on some vehicles. Simply remove the fuse (of the circuit you wish to test) from your fusebox and replace it with a fuse extension lead. Now insert the fuse into the extension lead. To measure the current drawn, just connect your lead.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667229040953,"sku":"pt-TA206","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/32023.jpg?v=1767226271"},{"product_id":"wps600c-pressure-transducer-kit","title":"WPS600c Pressure Transducer Kit","description":"\u003cp\u003eWith high accuracy and a wide measuring range, the Pico WPS600 Hydraulic Pressure Transducer connects to your PicoScope for convenient analysis and diagnosis of pressurized systems, including hydraulic systems.\u003cbr\u003e• Accurately measure up to 600 bar (8700 psi)\u003cbr\u003e• two pressure ranges\u003cbr\u003e• Ultra-fast 100 microsecond response time (0% to 90% of full scale)\u003cbr\u003e• Internal rechargeable LiPo battery\u003cbr\u003e• Industry Standard M16 x 2 Test point connector\u003cbr\u003e• Auto zeroing\u003cbr\u003e• High noise immunity\u003cbr\u003e• Temperature compensated\u003cbr\u003e• Durable housing\u003c\/p\u003e\n\u003cp\u003eNot for continuous operation!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressure Ranges\u003c\/strong\u003e\u003cbr\u003eThe two pressure ranges of the WPS600 allow accurate measurement and diagnosis of permanent and non-permanent automotive and industrial hydraulic systems. Each range offers accuracy of 1% of scale and a 100 µs response time.\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003eRange 1: 0 to 600 bar (0 to approx 8700 psi) for high-pressure tests in hydraulic systems. \u003cbr\u003eOutput scaling is 1 V\/100 bar (1 V\/1450 psi)\u003c\/p\u003e\n\u003cp style=\"margin-left: 40px;\"\u003eRange 2: 0 to 60 bar (0 to approx 870 psi) for low-pressure hydraulic systems and oil pumps.\u003cbr\u003eOutput scaling is 1 V\/10 bar (1 V\/145 psi)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Fluid Types\u003c\/strong\u003e\u003cbr\u003eThe WPS600 is designed for use with hydraulic fluids. Do not use with any other type of liquid or gas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTypical Uses\u003c\/strong\u003e\u003cbr\u003e- Hydraulic pump performance\u003cbr\u003e- Hydraulic valve switching activity\u003cbr\u003e- Hydraulic pressure control valve performance\u003cbr\u003e- Hydraulic pressure decay\u003cbr\u003e- Residual hydraulic pressure\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003cbr\u003e• WPS600 pressure transducer with lithium polymer (LiPo) battery\u003cbr\u003e• Carrying case\u003cbr\u003e• USB to mini-USB charging cable 2 meter long\u003cbr\u003e• BNC to BNC cable 1 meter long\u003cbr\u003e• User’s Guide\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe WPS600 complies with the following standards:\u003c\/strong\u003e\u003cbr\u003e- Electromagnetic Compatibility (EMC) Directive 2004\/108\/EC\u003cbr\u003e- FCC Part 15\u003cbr\u003e- Pressure Equipment Directive 97\/23\/EC Article 3.3\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667240051001,"sku":"pt-PP833","price":1110.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/WPS600c_Pressure_Transducer_Kit_pt-PP833_1.webp?v=1744228396"},{"product_id":"universal-compression-hose-high-strength","title":"Universal Compression Hose (High-Strength)","description":"\u003cp\u003ePurchase the complete set of adapters with hose or purchase each item separately\u003cspan style=\"font-size: 12.2222px;\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWithout an adapter, the compression hose will not connect to the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe Pico compression hose will connect to these adapters which are available for the following spark plug thread sizes:\u003cbr\u003e- M10 (10mm) short reach \u003clabel for=\"persInput-129-1265\"\u003e- AES# pt-TA213*\u003c\/label\u003e\u003cbr\u003e- M10 (10mm) deep reach \u003clabel for=\"persInput-129-1265\"\u003e- AES# pt-TA214\u003c\/label\u003e\u003cbr\u003e- M12 (12mm) deep reach \u003clabel for=\"persInput-129-1265\"\u003e- AES# pt-TA216*\u003c\/label\u003e\u003cbr\u003e- M14 (14mm) short reach \u003clabel for=\"persInput-129-1265\"\u003e- AES# pt-TA217*\u003c\/label\u003e\u003cbr\u003e- M14 (14mm) deep reach \u003clabel for=\"persInput-129-1265\"\u003e- AES# pt-TA218*\u003c\/label\u003e\u003cbr\u003e- M16 (16mm) for Ford triton style engines \u003clabel for=\"persInput-129-1265\"\u003e- AES# pt-TA219\u003c\/label\u003e\u003cbr\u003e- M18 (18mm) for older engines \u003clabel for=\"persInput-129-1265\"\u003e- AES# pt-TA220\u003c\/label\u003e\u003cbr\u003e* Item included with the \u003cspan style=\"font-size: 12px;\"\u003e\u003ca href=\"https:\/\/www.aeswave.com\/WPS500X-Pressure-Transducer-Kit-p9265.html\"\u003ePico WPS500X Pressure transducer Kit (AES# pt-PP939)\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe adapter used should be the same thread size and no longer than the tip of spark plug you are replacing. While using a shorter adapter than the spark plug you are replacing may produce results that are slightly low, using one that is longer may damage your engine.\u003c\/p\u003e\n\u003cdiv\u003eNOTE: Pico's compression hose \u003cspan style=\"font-size: 12.2222px;\"\u003econnects directly to the \u003c\/span\u003e\u003ca href=\"http:\/\/www.aeswave.com\/cart.php?m=search_results\u0026amp;headerSearch=Y\u0026amp;search=wps500x+master\" style=\"font-size: 12.2222px;\"\u003ePico WPS500x transducer\u003c\/a\u003e\u003cspan style=\"font-size: 12.2222px;\"\u003e. With the appropriate type 2 mini-coupler, this hose can be connected to the Fluke PV350 and to Snap-on transducers.\u003cbr\u003eFor the pv350 use a 1\/8\" - 2 series One-way with \u003ca href=\"https:\/\/www.couplers.com\/index.php?foster=PLUG-S2-FT;oneway-102\" target=\"_blank\"\u003e1\/4\" FPT (\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"font-size: 12.2222px;\"\u003e\u003ca href=\"https:\/\/www.couplers.com\/index.php?foster=PLUG-S2-FT;oneway-102\" target=\"_blank\"\u003eFosters 27-2)\u003c\/a\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-size: 12.2222px;\"\u003eFor the Snap-on transducer use \u003c\/span\u003e\u003cspan style=\"font-size: 12.2222px;\"\u003ea 1\/8\" - 2 series One-way with \u003ca href=\"https:\/\/www.couplers.com\/index.php?foster=PLUG-S2-FT;oneway-102\" target=\"_blank\"\u003e1\/8\" FPT (\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"font-size: 12.2222px;\"\u003e\u003ca href=\"https:\/\/www.couplers.com\/index.php?foster=PLUG-S2-FT;oneway-102\" target=\"_blank\"\u003eFosters 23-2)\u003c\/a\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eNOTE: To connect Pico's compression hose to a Fluke pv350 or to a \u003cspan style=\"font-size: 12.2222px;\"\u003eSnap-on transducer, \u003c\/span\u003euse a \u003cspan style=\"font-size: 12.2222px;\"\u003e1\/8\" - 2 series One-way Shut-off:\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-size: 12.2222px;\"\u003e- \u003ca href=\"https:\/\/www.couplers.com\/index.php?foster=PLUG-S2-FT;oneway-102\" target=\"_blank\"\u003e1\/4\" FPT (\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"font-size: 12.2222px;\"\u003e\u003ca href=\"https:\/\/www.couplers.com\/index.php?foster=PLUG-S2-FT;oneway-102\" target=\"_blank\"\u003eFosters 27-2)\u003c\/a\u003e for the Fluke pv350.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-size: 12.2222px;\"\u003e- \u003ca href=\"https:\/\/www.couplers.com\/index.php?foster=PLUG-S2-FT;oneway-102\" target=\"_blank\"\u003e1\/8\" FPT (\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"font-size: 12.2222px;\"\u003e\u003ca href=\"https:\/\/www.couplers.com\/index.php?foster=PLUG-S2-FT;oneway-102\" target=\"_blank\"\u003eFosters 23-2)\u003c\/a\u003e for the Snap-on Transducer.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003ePico's compression hose \u003cspan style=\"font-size: 12.2222px;\"\u003econnects directly to the \u003c\/span\u003e\u003ca href=\"http:\/\/www.aeswave.com\/cart.php?m=search_results\u0026amp;headerSearch=Y\u0026amp;search=wps500x+master\" style=\"font-size: 12.2222px;\"\u003ePico WPS500x transducer\u003c\/a\u003e\u003cspan style=\"font-size: 12.2222px;\"\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Pico Technology","offers":[{"title":"TA212 Complete Set","offer_id":45667242770745,"sku":"PT-TA212-09","price":313.0,"currency_code":"USD","in_stock":true},{"title":"TA212 Universal Hose","offer_id":45667242737977,"sku":"PT-TA212-08","price":89.0,"currency_code":"USD","in_stock":true},{"title":"TA213 - M10 Short Reach","offer_id":45667242508601,"sku":"PT-TA212","price":89.0,"currency_code":"USD","in_stock":true},{"title":"TA214 - M10 Deep Reach","offer_id":45667242541369,"sku":"PT-TA212-02","price":35.0,"currency_code":"USD","in_stock":true},{"title":"TA216 - M12 Deep Reach","offer_id":45667242574137,"sku":"PT-TA212-03","price":35.0,"currency_code":"USD","in_stock":true},{"title":"TA217 - M14 Short Reach","offer_id":45667242672441,"sku":"PT-TA212-06","price":35.0,"currency_code":"USD","in_stock":true},{"title":"TA218 - M14 Deep Reach","offer_id":45667242705209,"sku":"PT-TA212-07","price":35.0,"currency_code":"USD","in_stock":true},{"title":"TA219 - M16 Ford Triton","offer_id":45667242639673,"sku":"PT-TA212-05","price":35.0,"currency_code":"USD","in_stock":true},{"title":"TA220 - M18 Short Reach","offer_id":45667242606905,"sku":"PT-TA212-04","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Universal_Compression_Hose__High-Strength__PT-TA212_1.webp?v=1744228434"},{"product_id":"wps500x-pressure-transducer","title":"WPS500X Pressure Transducer","description":"\u003cp\u003eDesigned to offer uncompromising resolution and accuracy, the Pico automotive diagnostic pressure transducer allows quick and accurate pressure analysis of many automotive systems, with:\u003cbr\u003e* three pressure ranges\u003cbr\u003e* a zoom tool\u003cbr\u003e* integrated bleed-off \/ pressure relief valve\u003c\/p\u003e\n\u003cp\u003eAccurately measure pressure to 500psi\u003c\/p\u003e\n\u003cp\u003eUltra fast 100\u003cspan style=\"color: rgb(0, 0, 0); line-height: 19.2px; font-family: sans-serif; font-size: 13px;\"\u003eμ\u003c\/span\u003eS response time\u003c\/p\u003e\n\u003cp\u003eZoom feature for enhanced analysis capabilities\u003c\/p\u003e\n\u003cp\u003eRechargeable Li-PO battery\u003c\/p\u003e\n\u003cp\u003eRechargeable Li-PO battery\u003c\/p\u003e\n\u003cp\u003eIntegrated pressure relief \/ bleed-off valve\u003c\/p\u003e\n\u003cp\u003eAuto Zeroing\u003c\/p\u003e\n\u003cp\u003eHigh noise immunity\u003c\/p\u003e\n\u003cp\u003eTemperature compensated\u003c\/p\u003e\n\u003cp\u003eThis unit is an auto zeroing pressure transducer designed to offer form and flexibility to automotive diagnostics.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat Lab Scopes does the WPS500X Transducer work with?\u003c\/b\u003e\u003cbr\u003eThe Pico WPS500X Transducer works with all modern automotive and industrial lab scopes, including, but not limited to: PicoScope, Snap-on Verus, Snap-on MODIS, Snap-on VantagePro, Fluke ScopeMeters, Bosch, Interro, UEI, OTC, etc... However, lab scopes with banana inputs require a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/aeswave-store.myshopify.com\/products\/aes-flexible-adapter-banana-plugs-to-bnc-male\"\u003ebanana to BNC Male adapter.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePP652 Kit Contents\u003c\/strong\u003e\u003cbr\u003e• TA071 WPS500X pressure transducer \u003cbr\u003e• TA081 Cable: USB to mini USB Cable 2 meters\u003cbr\u003e• TA098 Cable: insulated BNC to insulated BNC cable 5 meters\u003cbr\u003e• PA094 Hard Plastic Carry case\u003cbr\u003e• DO157 User Manual\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/aeswave-store.myshopify.com\/products\/wps500x-pressure-transducer-kit\"\u003eMore accessories included with the WPS500x Master Kit.\u003c\/a\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667243458873,"sku":"pt-PP652","price":940.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/WPS500X_Pressure_Transducer_pt-PP652_1.webp?v=1744228441"},{"product_id":"high-bandwidth-10-1-attenuator","title":"High bandwidth 10:1 attenuator","description":"\u003cp\u003eWith high bandwidth and fault-protection, the 10:1 attenuator has been designed to allow fuel injector and primary ignition waveforms to be measured using PicoScope oscilloscopes.\u003c\/p\u003e\n\u003cp\u003eThe Pico TA197 is a passive 10:1 attenuator. This means that a 10 V signal at its input will appear as a 1 V signal on the output. The TA197 allows voltages of up to 400 V to be measured.\u003c\/p\u003e\n\u003cp\u003eThe TA197 attenuator also increases the input impedance of the oscilloscope from 1 MΩ to 8 MΩ and can also be used when measuring the output of high-impedance sensors such as piezo knock sensors where connecting an automotive scope can attenuate the signal or induce a fault code.\u003c\/p\u003e\n\u003cp\u003eNote : When using a PicoScope 4225 or 4425 oscilloscope the attenuator is not normally needed for measuring injectors as the voltage spike is usually under 200 V. It will be required however when using older generations of PicoScopes which only measure to 50 V or 100 V. The 10:1 attenuator is an improved version of the 20:1 attenuator previously available from Pico.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Precautions\u003c\/strong\u003e\u003cbr\u003eThe Pico TA197 is designed for measuring automotive signals such as fuel injector and primary ignition voltages (nominally 6, 12 or 24 volts). This attenuator must not be used to measure mains voltages, secondary ignition or other hazardous voltages.\u003c\/p\u003e\n\u003cp\u003eFuel injector and primary ignition signals contain short duration high voltage spikes “inductive kicks”. We therefore recommend the use of two ground connections between the oscilloscope and the vehicle under test. One ground connection is made using the measurement test lead. A second ground lead should be connected between one of the BNC connectors on the oscilloscope and a secure ground point on the vehicle such as the negative terminal of the battery. Misconfiguration and\/or failure to follow these warnings may cause damage to the product and\/or computer and could cause injury to yourself or others.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e- Attenuation: 10:1\u003cbr\u003e- Input impedance: 8 MΩ\u003cbr\u003e- Input capacitance: 27 pF\u003cbr\u003e- Bandwidth: 20 MHz (–3 dB)\u003cbr\u003e- Max. input: 400 V\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667243884857,"sku":"pt-TA197","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/13917.jpg?v=1689076473"},{"product_id":"30a-ac-dc-current-clamp","title":"30A AC\/DC Current Clamp","description":"\u003cp\u003eThe 30 A precision current clamp allows you to measure from 5 mA up to 30 A without cutting, disconnecting or stripping the wire. It is ideal for measuring the currents in sensors and actuators across most modern passenger and commercial vehicles.\u003c\/p\u003e\n\u003cp\u003eThe TA189 provides improved sensitivity, lower noise and faster response. Featuring a 25 mm (almost 1-inch) jaw size this clamp is suitable for measuring battery drain over long periods. It also features an auto power-down facility to save battery life when not in use (this feature can be disabled for battery drain \/ shutdown current testing).\u003c\/p\u003e\n\u003cp\u003eUsing advanced Hall Effect sensors for improved sensitivity and high external field rejection as well as closed loop control for increased accuracy, the TA189 delivers a breakthrough in range and accuracy to meet the challenges of modern vehicles.\u003c\/p\u003e\n\u003cp\u003eThese current clamps have been designed for use with PicoScope oscilloscopes and feature additional screening to reduce noise pickup.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667244278073,"sku":"pt-TA189","price":539.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/13956.jpg?v=1689076475"},{"product_id":"cop-probe","title":"COP probe","description":"\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTest lead sold separately, see below.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Coil-on-plug (COP) and signal probe from Pico Technology is the fastest way you can check coil–on–plug ignition coils and spark plugs.\u003c\/p\u003e\n\u003cp\u003e- Find misfires fast\u003cbr\u003e- Displays scope patterns of the secondary, faster than scoping the primary\u003cbr\u003e- Works on all automotive scopes capable of displaying ignition patterns\u003cbr\u003e- Can also be used to investigate injectors and other inductive actuators\u003cbr\u003e- Flexible design allows for easier access to hard-to-reach components\u003cbr\u003e- No batteries required\u003cbr\u003e\u003cbr\u003eLike distributors, spark plug wires are starting to disappear from cars. With the new COP ignition systems the ignition coils are connected directly to the spark plugs — eliminating the need for the spark plug wires. With no high–voltage spark wires, a COP probe is required to be able to pick up the secondary ignition waveform.\u003c\/p\u003e\n\u003cp\u003eAlong with testing COP systems, the Coil-on-plug and signal probe can also be used to obtain a secondary ignition waveform on conventional ignition systems.\u003c\/p\u003e\n\u003cp\u003eTo acquire a secondary signal with the Pico COP simply press the probe against the coil. The Pico COP does not require back–probing, special adapters, foil strips, or batteries.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #e74c3c;\"\u003e\u003cb\u003eCoil construction can prevent capturing a waveform with any paddle probe. 4-wire and some 3-wire coils will not produce usable waveforms.\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eContents\u003c\/b\u003e\u003cbr\u003e* Coil-on-plug (COP) and Signal Probe for Secondary Ignition\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eTest Leads\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003eThe Pico COP probe can be used with practically any oscilloscope. To connect the Pico COP to your scope you need the appropriate test lead:\u003cbr\u003e- for scopes with \u003ca href=\"http:\/\/www.aeswave.com\/BNC-Coupler-Lead-for-COP-Probes-p9338.html\"\u003eBNC inputs\u003c\/a\u003e (Pico, OTC, Interro)\u003cbr\u003e- for scopes with \u003ca href=\"http:\/\/www.aeswave.com\/Banana-Coupler-Lead-for-COP-Probes-p9339.html\"\u003eBanana inputs\u003c\/a\u003e (Snap-on, UEI)\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_pt_ta204_picoscope_cop.png?v=1689076502\" style=\"width: 599px; height: 363px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667248963897,"sku":"pt-TA204","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/COP_probe_pt-TA204_1.webp?v=1744230290"},{"product_id":"2-wire-break-out-lead","title":"2 Wire Break Out Lead","description":"\u003cp\u003eThe Pico TA012 2-Pin AMP connector breakout lead enables you to take voltage readings from 2-pin sensors and actuators. It gives access to the individual wires and you could view injector voltage and injector current at the same time on individual channels of your lab scope.\u003c\/p\u003e\n\u003cp\u003eSimply connect the breakout lead into a cable loom, and then, depending upon the circuit and the test you wish to perform, connect the signal lead of your scope to the appropriate banana socket of the breakout to view voltage. For current, clamp an amp probe around the colored wire.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e\u003cbr\u003eIt is possible to cause a short circuit to the lab scope if incorrect connections are made! A short circuit could seriously damage the the lab scope. It is recommended that the oscilloscope always has an ground connection when using the Pico TA012 2-Pin AMP connector breakout lead.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667275604281,"sku":"pt-TA012","price":37.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/2_Wire_Break_Out_Lead_pt-TA012_1.webp?v=1744228527"},{"product_id":"full-set-of-fuse-extension-leads","title":"Full set of fuse extension leads","description":"\u003cp\u003eDo you need to measure the current through a circuit but can’t find anywhere on the vehicle where you can connect your current clamp?\u003c\/p\u003e\n\u003cp\u003eFuse extension leads are a simple accessory that can save you valuable time.\u003c\/p\u003e\n\u003cp\u003eFuse extension leads are quick and easy to use: simply remove the fuse (of the circuit you wish to test) from your fusebox and replace it with a fuse extension lead. \u003cspan style=\"font-size: 12px;\"\u003eNow insert the fuse into the extension lead. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eTo measure the current drawn, just connect your current clamp to the extension lead. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003cbr\u003e- \u003c\/span\u003eATC\u003cbr\u003e- Mini\u003cbr\u003e- \u003ca href=\"http:\/\/www.aeswave.com\/JCase-Fuse-Extension-Lead-p9267.html\"\u003eJCASE\u003c\/a\u003e\u003cbr\u003e- Maxi\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667277766969,"sku":"pt-PP967","price":123.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Full_sef_of_fuse_extension_leads_fuse_loops.webp?v=1747953094"},{"product_id":"breakout-lead-kit-a","title":"Breakout Lead Kit A","description":"\u003cp\u003eThe Pico PP968 Breakout Lead Set lets you take voltage readings from the multipin sensors and actuators in the engine compartment. Simply connect the appropriate breakout lead into the existing cable loom, and then take the output signal from the 4 mm banana plugs into the automotive oscilloscope using one of the TA125 to TA128 premium test leads.\u003c\/p\u003e\n\u003cp\u003eThe breakout leads give access to the individual wires to allow probing with current clamps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents \u003c\/strong\u003e\u003cbr\u003e- TA190: 2-pin ACS breakout lead\u003cbr\u003e- TA191: 3-pin Kostal breakout lead\u003cbr\u003e- TA192: 2-pin Deutsch breakout lead\u003cbr\u003e- TA193: 4-pin Deutsch breakout lead\u003cbr\u003e- TA194: 2-pin Kostal breakout lead\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667278717241,"sku":"pt-PP968","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Breakout_Lead_Kit_A_pt-PP968_1.webp?v=1744228535"},{"product_id":"current-clamp-60a-ac-dc-with-bnc","title":"Current Clamp (60A AC\/DC) with BNC","description":"\u003cp\u003eUse Pico TA018 (pp264) current clamp for measuring currents between 10 mA and 60 A. This enables the lab scope to display current waveforms for fuel injectors and fuel pumps.\u003c\/p\u003e\n\u003cp\u003eThe current clamp has two calibration settings, set by a slider switch on the handle of the probe.\u003cbr\u003e1. 1 mV\/10 mA (100 mV = 1 A) — use this for testing currents up to 20 A.\u003cbr\u003e2. 1 mV\/100 mA (10 mV = 1 A) — use this for testing current up to 60 A.\u003cbr\u003eIn use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required.\u003cbr\u003eThe lead is 3 meters long (just under 10-ft).\u003cbr\u003e\u003cbr\u003eThese current clamps have been designed for use with PicoScope oscilloscopes and feature additional screening to reduce noise pickup.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eConnecting the current clamp\u003c\/strong\u003e\u003cbr\u003eThe TA018 current clamp features a BNC connector and can be plugged directly into a PicoScope.\u003cbr\u003eOnce connected to the PicoScope, switch the current clamp on (green LED should light) and then clamp the jaws around the current carrying conductor as shown.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTypical Uses\u003c\/strong\u003e\u003cbr\u003eThe TA018 current clamp simply offers the best value for money without compromising resolution. This current has multiple uses with a flexible measurement range from 10 mA to 60 A so ensuring the clamp is always in use for multiple applications such as:\u003cbr\u003e- Parasitic drain measurements\u003cbr\u003e- Petrol and diesel injector operation\u003cbr\u003e- Solenoid testing\u003cbr\u003e- Throttle motor functions\u003cbr\u003e- EGR actuator testing\u003cbr\u003e- Broadband 02 sensor testing (in conjunction with current multiplier)\u003cbr\u003e- High current consumption tests up to 60 Amps (Motor lock up test)\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667279077689,"sku":"pt-PP264","price":133.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/16096.jpg?v=1689076652"},{"product_id":"bnc-plug-to-4mm-adapter","title":"BNC plug to 4mm Adapter","description":"\u003cp\u003eThe BNC to 4 mm adapter connects two 4 mm (“banana”) plugs to a BNC socket. If you have a sensor such as a current clamp with 4 mm plug outputs, for example, this adapter allows you to plug it into a PicoScope Automotive Oscilloscope with a BNC input. The 4 mm sockets and BNC plug are fully shrouded for safety.\u003cbr\u003e\u003cbr\u003eLength: 63 mm\u003cbr\u003eHeight: 18.5 mm\u003cbr\u003eWidth: 34 mm\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667279536441,"sku":"pt-MI078","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/15896.jpg?v=1689076654"},{"product_id":"usb-2-0-cable-1-8m-5-9-ft-long","title":"USB 2.0 Cable - 1.8m (5.9 ft long)","description":"\u003cp\u003eA high-quality cable designed to ensure reliable signal and power connections between your PC and PicoScope 4223\/4423 and older.\u003c\/p\u003e\n\u003cp\u003eThe cable is 5-ft 10-inches long or 1.8 meters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis cable is not compatible with the 4225\/4425 PicoScope Modules. Please see AES# \u003ca href=\"https:\/\/www.aeswave.com\/USB-3-0-cable-1-8m-for-4225-4425-newer-p9449.html\"\u003ept-TA155\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667279962425,"sku":"pt-MI106","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/USB_2.0_Cable_-_1.8m__5.9_ft_long__pt-MI106_1.webp?v=1744228539"},{"product_id":"usb-2-0-cable-4-5m-14-75-ft-long","title":"USB 2.0 Cable - 4.5m (14.75 ft long)","description":"\u003cp\u003eA high-quality cable designed to ensure reliable signal and power connections between your PC and PicoScope.\u003c\/p\u003e\n\u003cp\u003eThe cable is 14-ft 9-inches long or 4.5 meters.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667280126265,"sku":"pt-MI121","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/17974.jpg?v=1689076664"},{"product_id":"current-clamp-600a-ac-dc-with-bnc","title":"Current Clamp (600A AC\/DC) with BNC","description":"\u003cp\u003eThe Pico TA019 (pp266) current clamp is ideal for use with a PicoScope automotive oscilloscope to display starter current waveforms, charging currents and for performing quick compression tests.\u003c\/p\u003e\n\u003cp\u003eThe black shielded lead is straight (not coiled) and is approximately 10-ft long (3-meters) and terminates to a metal BNC.\u003cbr\u003e\u003cbr\u003eThe current clamp can measure up to 600 A (AC or DC). In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required.\u003cbr\u003e\u003cbr\u003eThis current clamp is designed for use with PicoScope oscilloscopes and features additional screening to reduce noise pickup. The shielded lead is 3 meters long (just under 10-ft).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTypical Uses\u003c\/strong\u003e\u003cbr\u003eGiven the size and reach of the jaws with this clamp, starter motor current draw tests up to 600 amps are incredibly easy and more importantly non-intrusive on petrol vehicles. Alternator charging systems can also be evaluated (Petrol and diesel) with the TA019 clamp ensuring good accuracy with reduced noise levels, take a look below:\u003cbr\u003e- Relative compression test (Petrol)\u003cbr\u003e- Charging system evaluation (Petrol and Diesel)\u003cbr\u003e- Battery testing with Pico Diagnostic’s software (Petrol)\u003cbr\u003e- Starter motor and circuit evaluation (Petrol)\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667280388409,"sku":"pt-PP266","price":168.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/15911.jpg?v=1689076665"},{"product_id":"set-of-2-high-pressure-fuel-hoses-max-500-psi-34-47-bar-large-and-small-schrader-valve","title":"Set of 2 high-pressure fuel hoses (max. 500 psi \/ 34.47 bar) , large and small Schrader valve","description":"\u003cp\u003eSet of Fuel pressure test hoses, small and large schrader valve.\u003cbr\u003e\u003cbr\u003eThe TA117 (small) and TA083 (large) fuel pressure hoses are designed specifically for use with the WPS500X pressure transducer, with a strong construction to ensure safe and accurate operation. Each hose is terminated at one end with a Foster connector to fit the WPS500X, and at the other end with a Schrader valve to fit standard fuel rails.\u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e* Conforms to SAE30R9\u003cbr\u003e* Maximum working temperature of 115 degrees C\u003cbr\u003e* Maximum pressure rating 500 psi (34.47 bar, or 3.447 kPa)\u003cbr\u003e* Hose materials: Teflon tube reinforced by outer steel braid\u003cbr\u003e* All materials compatible with gasoline and ethanol\/ethanol blends\u003cbr\u003e* Low permeation\u003cbr\u003e* Viton seals in couplers and valves\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667280683321,"sku":"pt-PP794","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/17672.jpg?v=1689076667"},{"product_id":"premium-test-leads-5m-long-set-of-4","title":"Premium test leads 5M long (set of 4)","description":"\u003cp\u003ePico premium leads are color-coded so that the color of the lead in the engine bay matches the color of the on-screen waveform in PicoScope Automotive. Never again will you waste your time wondering which lead is which.\u003c\/p\u003e\n\u003cp\u003eThe Pico premium leads are fully screened to minimize noise pickup so you can have complete confidence in the signal that you are measuring.\u003c\/p\u003e\n\u003cp\u003eThe 5-meter leads include a 2.5-meter ground extension\u003c\/p\u003e\n\u003cp\u003e- 5-meters long (16.4ft)\u003cbr\u003e- Fully shielded\u003cbr\u003e- Insulated BNC at scope connection\u003cbr\u003e- 4mm Shrouded\/stacking banana plugs\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667280879929,"sku":"pt-PP941","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Premium_test_leads_5M_long__set_of_4__pt-PP941_1.webp?v=1744228543"},{"product_id":"ast-to-wps500-adaptor-set","title":"AST to WPS500 adaptor set","description":"\u003cp\u003eThe kit consist of a compression hose to use with various AST adaptor kits, such as dummy injectors and glow plugs. It also consists of a second adaptor for using the WPS500X to replace the original dial gauge in various AST testing kits.\u003c\/p\u003e\n\u003cp\u003eThe Pico PP970 lets you use your WPS500X as a replacement for the gauge in a wide range of AST (and other Foster 12FST) pressure testing kits. This kit enables you to re-use your existing adaptors and still gain the advantages of seeing pressure activity in real time with the WPS500X.\u003c\/p\u003e\n\u003cp\u003eThe kit consist of a compression hose to use with various AST adaptor kits, such as dummy injectors and glow plugs. It also consists of a second adaptor for using the WPS500X to replace the original dial gauge in various AST testing kits.\u003c\/p\u003e\n\u003cp\u003eThe Pico PP970 converts the male Foster 2 series connector on the input of the WPS500X to either a male, or using the TA212 pressure hose, a female Foster 12FST series quick coupler. More details on Foster couplers is available from \u003ca href=\"http:\/\/www.couplers.com\/\" target=\"_blank\"\u003ehttp:\/\/www.couplers.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667281142073,"sku":"pt-PP970","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/AST_to_WPS500_adaptor_set_pt-PP970_1.webp?v=1744228548"},{"product_id":"vacuum-tap-for-wps-500","title":"Vacuum tap for WPS 500","description":"\u003cp\u003e(AES# pt-PP972)\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe Pico PP972 Vacuum Tap provides a simple way to connect the Pico WPS500X into an existing vacuum hose. Simply disconnect one end of the hose, inset the tap and use an additional short length of hose to reconnect the system. The Pico WPS500X can then be attached directly to the quick coupler enabling in-circuit, low-pressure measurements to be made on the live system. The 2 conical sections will cope with a range of hose internal diameters from 3 mm to 6 mm.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667281666361,"sku":"pt-PP972","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Vacuum_tap_for_WPS_500_pt-PP972_1.webp?v=1744228551"},{"product_id":"fuel-hose-pressure-tap-for-wps500-small","title":"Fuel hose pressure tap for WPS500 (small)","description":"\u003cp\u003eThe Pico PP973 fuel hose pressure tap provides a simple way to connect the Pico WPS500X into an existing fuel or other suitable sized hose. Simply disconnect one end of the hose, inset the tap and use an additional short length of hose to reconnect the system. The Pico WPS500X can then be attached directly to the quick coupler enabling in-circuit pressure measurements to be made on the live system. If a clear length of hose is used, you can inspect the flow for any signs of cavitation, bubbles or unexpected reverse flow. The small fuel hose pressure tap is compatible with both 1\/4\" and 5\/16\" internal diameter flexible hoses.\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667281764665,"sku":"pt-PP973","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Fuel_hose_pressure_tap_for_WPS500__small__pt-PP973_1.webp?v=1744228555"},{"product_id":"fuel-hose-pressure-tap-for-wps500-medium","title":"Fuel hose pressure tap for WPS500 (Medium)","description":"\u003cp\u003eThe Pico PP974 fuel hose pressure tap provides a simple way to connect the Pico WPS500X into an existing fuel or other suitable sized hose. Simply disconnect one end of the hose, inset the tap and use an additional short length of hose to reconnect the system. The Pico WPS500X can then be attached directly to the quick coupler enabling in-circuit pressure measurements to be made on the live system. If a clear length of hose is used, you can inspect the flow for any signs of cavitation, bubbles or unexpected reverse flow. The medium fuel hose pressure tap is compatible with 5\/16\" and 3\/8\" internal diameter flexible hoses.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667281797433,"sku":"pt-PP974","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Fuel_hose_pressure_tap_for_WPS500__Medium__pt-PP974_1.webp?v=1744228559"},{"product_id":"small-croc-clip-black","title":"Small Croc. Clip - black","description":"\u003cp\u003eThe crocodile clips are fully insulated with a 4 mm socket in the handle, offering an easy connection to one of our premium test leads. The toothed grip offers good contact on fine wire, with a 11 mm jaw opening limit. - Length: 57 mm - Height: 19 mm - Depth: 7 mm - Clamping limit: 7 mm\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667283370297,"sku":"pt-TA003","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Small_Croc._Clip_-_black_pt-TA003_1.webp?v=1744228563"},{"product_id":"small-croc-clip-red","title":"Small Croc. Clip - red","description":"\u003cp\u003eThe crocodile clips are fully insulated with a 4 mm socket in the handle, offering an easy connection to one of our premium test leads. The toothed grip offers good contact on fine wire, with a 11 mm jaw opening limit. - Length: 57 mm - Height: 19 mm - Depth: 7 mm - Clamping limit: 7 mm\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667283566905,"sku":"pt-TA004","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Small_Croc._Clip_-_red_pt-TA004_1.webp?v=1744228566"},{"product_id":"large-dolphin-clip-black","title":"Large Dolphin Clip - black","description":"\u003cp\u003eThis crocodile clip is fully insulated with a 4 mm socket in the handle, offering an easy connection to one of our premium test leads. The toothed grip offers good contact on fine wire, with a 30 mm jaw opening limit. - Length: 92 mm - Height: 37.5 mm - Depth: 15.3 mm - Clamping limit: 30 mm\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667283697977,"sku":"pt-TA005","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Large_Dolphin_Clip_-_black_pt-TA005_1.webp?v=1744228570"},{"product_id":"large-dolphin-clip-red","title":"Large Dolphin Clip - red","description":"\u003cp\u003eThis crocodile clip is fully insulated with a 4 mm socket in the handle, offering an easy connection to one of our premium test leads. The toothed grip offers good contact on fine wire, with a 30 mm jaw opening limit. - Length: 92 mm - Height: 37.5 mm - Depth: 15.3 mm - Clamping limit: 30 mm.\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667284091193,"sku":"pt-TA006","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Large_Dolphin_Clip_-_red_pt-TA006_1.webp?v=1744228573"},{"product_id":"bnc-to-bnc-with-earth-clamp","title":"Pico TA033 – BNC to BNC Cable with Earth Clamp","description":"\u003cp\u003eThe Pico TA033 is a 3-meter (9 ft 10 in) shielded BNC-to-BNC cable featuring an integrated earth (ground) clamp, designed specifically for use with the Pico Coil-On-Plug Ignition Probe (\u003ca href=\"http:\/\/www.aeswave.com\/Coil-on-plug-SOP-and-Signal-Probe-for-Secondary-Ignition-and-COP-p9335.html\"\u003eAES# pt-TA204\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003eThis cable ensures stable, noise-free signal transfer when diagnosing ignition systems and provides a secure grounding point via the attached clamp.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667287105849,"sku":"pt-TA033","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/BNC_to_BNC_with_Earth_Clamp_pt-TA033_1.webp?v=1744228577"},{"product_id":"fuse-breakout-atc","title":"Fuse breakout ATC","description":"\u003cp\u003eDo you need to measure the current through a circuit but cannot find anywhere on the vehicle where you can connect your current clamp? \u003cbr\u003e\u003cbr\u003eThe Pico TA034 fuse extension leads make it quick and easy: simply remove the fuse (of the circuit you with to test) from your fuse box and replace it with a fuse extension lead. Now insert the fust into the extension lead. To measure the current drawn, just connect your lead.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667287367993,"sku":"pt-TA034","price":27.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/pt-TA034.webp?v=1761953146"},{"product_id":"fuse-breakout-mini","title":"Fuse breakout mini","description":"\u003cp\u003eDo you need to measure the current through a circuit but cannot find anywhere on the vehicle where you can connect your current clamp?\u003cbr\u003e\u003cbr\u003eThe Pico TA035 fuse extension leads make it quick and easy: simply remove the fuse (of the circuit you wish to test) from your fuse box and replace it with a fuse extension lead. Now insert the fuse into the extension lead. To measure the current drawn, just connect your lead.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667287433529,"sku":"pt-TA035","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/pt-TA035.webp?v=1759530634"},{"product_id":"fuel-pressure-test-hose-large-scrader-valve","title":"Pico TA083 – Fuel Pressure Test Hose (Large Schrader Valve)","description":"\u003cp data-end=\"305\" data-start=\"176\"\u003e\u003cstrong data-end=\"305\" data-start=\"242\"\u003eFor WPS500X | 500 PSI Rated | SAE 30R9 | Ethanol Compatible\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Pico TA083 Fuel Pressure Test Hose is purpose-built for use with the Pico WPS500X pressure transducer, offering safe and accurate fuel pressure measurements on systems equipped with a standard large Schrader valve.\u003c\/p\u003e\n\u003cp\u003eEngineered with Teflon tubing, a steel-braided outer layer, and a high-pressure Foster quick-connect fitting, this hose delivers durable performance under harsh engine bay conditions. It’s ideal for both gasoline and ethanol blend fuel systems.\u003c\/p\u003e\n\u003cp data-end=\"1310\" data-start=\"1290\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-end=\"1596\" data-start=\"1311\"\u003e\n\u003cli data-end=\"1352\" data-start=\"1311\"\u003e\n\u003cp data-end=\"1352\" data-start=\"1313\"\u003e\u003cstrong data-end=\"1330\" data-start=\"1313\"\u003eMax Pressure:\u003c\/strong\u003e 500 PSI \/ 34.47 BAR\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1391\" data-start=\"1353\"\u003e\n\u003cp data-end=\"1391\" data-start=\"1355\"\u003e\u003cstrong data-end=\"1375\" data-start=\"1355\"\u003eMax Temperature:\u003c\/strong\u003e 115°C \/ 239°F\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1419\" data-start=\"1392\"\u003e\n\u003cp data-end=\"1419\" data-start=\"1394\"\u003e\u003cstrong data-end=\"1408\" data-start=\"1394\"\u003eHose Type:\u003c\/strong\u003e SAE 30R9\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1467\" data-start=\"1420\"\u003e\n\u003cp data-end=\"1467\" data-start=\"1422\"\u003e\u003cstrong data-end=\"1439\" data-start=\"1422\"\u003eConstruction:\u003c\/strong\u003e Teflon tube + steel braid\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1529\" data-start=\"1468\"\u003e\n\u003cp data-end=\"1529\" data-start=\"1470\"\u003e\u003cstrong data-end=\"1493\" data-start=\"1470\"\u003eFuel Compatibility:\u003c\/strong\u003e Gasoline, ethanol, ethanol blends\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1596\" data-start=\"1530\"\u003e\n\u003cp data-end=\"1596\" data-start=\"1532\"\u003e\u003cstrong data-end=\"1548\" data-start=\"1532\"\u003eConnections:\u003c\/strong\u003e Foster male (to WPS500X) → Large Schrader valve\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667287662905,"sku":"pt-TA083","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Fuel_pressure_test_hose__large_scrader_valve_pt-TA083_1.webp?v=1744227123"},{"product_id":"vacuum-hose-adapter","title":"Vacuum Hose Adapter","description":"\u003cp\u003eSimple adaptor for connecting the WPS500X to a vehicles vacuum system either directly or in conjunction with the TA129 universal vacuum adaptor\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667287793977,"sku":"pt-TA085","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Vacuum_Hose_Adapter_pt-TA085_1.webp?v=1744227127"},{"product_id":"bleed-hose-for-wps500-pressure-transducer","title":"Pico TA086 – Bleed Hose for WPS500X Pressure Transducer","description":"\u003cp data-end=\"345\" data-start=\"200\"\u003e\u003cstrong data-end=\"345\" data-start=\"262\"\u003eSafely Bleeds Air from Fluid Test Equipment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Pico TA086 bleed hose is designed for use with the WPS500X pressure transducer to safely bleed trapped air from test equipment during setup. It ensures accurate readings and protects internal components by removing unwanted air pockets from fuel, coolant, and oil systems.\u003c\/p\u003e\n\u003cp\u003eBuilt from chemical-resistant materials, the TA086 can safely handle gasoline, kerosene, heating oils, glycol-based coolants, and cutting compounds. Maximum operating temperature: 73 C \/ 165 F\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667288187193,"sku":"pt-TA086","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Bleed_Hose_For_WPS500_Pressure_Transducer_pt-TA086_1.webp?v=1744227131"},{"product_id":"exhaust-adapter","title":"Pico TA087 – Exhaust Adapter for WPS500X Pressure Transducer","description":"\u003cp data-end=\"310\" data-start=\"158\"\u003e\u003cstrong data-end=\"310\" data-start=\"225\"\u003eRigid Tailpipe Adapter | Hands-Free Exhaust Pulse Testing | Quick-Connect Fitting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Pico TA087 is a rigid, pre-bent exhaust adapter designed specifically for use with the WPS500X pressure transducer. Its curved shape allows for secure, hands-free mounting in a vehicle’s tailpipe, enabling accurate measurement of exhaust gas pulsations during diagnostic testing.\u003c\/p\u003e\n\u003cp\u003eThe TA087 includes a quick-connect Foster fitting that attaches directly to the WPS500X, making setup fast and repeatable in the shop.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667288416569,"sku":"pt-TA087","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Exhaust_Adapter_pt-TA087_1.webp?v=1744227135"},{"product_id":"sprung-hook-black","title":"Sprung Hook (Black)","description":"\u003cp\u003eThis probe features a shrouded 4 mm socket and allow you to hook your test lead onto small components. The hook can hold conductors up to 2 mm in diameter. Length: 121 mm Height: 23 mm Rating: 1000 volts CAT III 20 amps\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667288547641,"sku":"pt-TA089","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Sprung_Hook__Black__pt-TA089_1.webp?v=1744227138"},{"product_id":"sprung-hook-red","title":"Sprung Hook (red)","description":"\u003cp\u003eThis probe features a shrouded 4 mm socket and allow you to hook your test lead onto small components. The hook can hold conductors up to 2 mm in diameter. Length: 121 mm Height: 23 mm Rating: 1000 volts CAT III 20 amps\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667288777017,"sku":"pt-TA090","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Sprung_Hook__red__pt-TA090_1.webp?v=1744227142"},{"product_id":"earth-wire-for-coil-pack","title":"Earth Wire for coil pack","description":"\u003cp\u003eGround for the \u003ca href=\"http:\/\/www.aeswave.com\/cart.php?m=search_results\u0026amp;headerSearch=Y\u0026amp;search=HT+Extension+Leads\"\u003ePico HT Extension Leads\u003c\/a\u003e.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667289170233,"sku":"pt-TA106","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/15976.jpg?v=1689076715"},{"product_id":"fuel-pressure-test-hose-small-scrader-valve","title":"Fuel pressure test hose, small scrader valve","description":"\u003cp\u003eThe Pico TA117 fuel hose is designed specifically for use with the Pico WPS500X pressure transducer, with a strong construction to ensure safe and accurate operation. The hose is terminated at one end with a Foster connector to fit the Pico WPS500X, and at the other end with a Schrader valve to fit standard fuel rails.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e- Conforms to SAE30R9\u003cbr\u003e- Maximum working temperature of 115 °C \/ 239 °F\u003cbr\u003e- Maximum pressure rating 500 psi \/ 34.47 bar\u003cbr\u003e- Hose materials: Teflon tube reinforced by outer steel braid\u003cbr\u003e- All materials compatible with gasoline and ethanol\/ethanol blends\u003cbr\u003e- Low permeation\u003cbr\u003e- Viton seals in couplers and valves\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667289268537,"sku":"pt-TA117","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Fuel_pressure_test_hose__small_scrader_valve_pt-TA117_1.webp?v=1744227146"},{"product_id":"universal-vacuum-hose-adapter-aluminum","title":"Universal vacuum hose adapter (aluminum)","description":"\u003cp\u003eThis aluminum biconical universal vacuum adaptor can be used to allow the WPS and FirstLook Sensor hoses to be connected to various sizes of smaller vacuum hoses within an engine bay. The adaptor fits vacuum tubes with internal diameters ranging from approximately 8.5 mm or 5\/16 in, to 2.8 mm or 1\/8 in.\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667289694521,"sku":"pt-TA129","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Universal_vacuum_hose_adapter__aluminum__pt-TA129_1.webp?v=1744227150"},{"product_id":"foster-2-series-quick-coupler-female-to-1-8-inch-npt-male","title":"Foster 2 Series quick coupler female to 1\/8 inch NPT male.","description":"\u003cp\u003eUse a Foster 2 Series quick coupler female to 1\/8 inch NPT male to use additional hoses with the Pico WPS500X.\u003c\/p\u003e\n\u003cp\u003ePlease note:\u003c\/p\u003e\n\u003cp\u003eAlthough this adapter allows you to use non-Pico compression hoses with the Pico WPS500X, we still recommended using only the \u003ca href=\"http:\/\/www.aeswave.com\/Universal-Compression-Hose-High-Strength-p9307.html\"\u003ePico compression hose\u003c\/a\u003e, it is engineered with the right stiffness and volume to allow the Pico WPS500X to accurately display the pressures it is exposed to.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667289792825,"sku":"pt-TA142","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/18904.jpg?v=1689076724"},{"product_id":"usb-3-0-cable-1-8m-for-4225-4425-newer-ta155","title":"USB 3.0 cable for 4225A\/4425A (TA155)","description":"\u003cp\u003eA high-quality cable designed to ensure reliable signal and power connections between your PC and PicoScope.\u003c\/p\u003e\n\u003cp\u003eUse this USB 3.0 cable with these Picoscope modules:\u003cbr\u003e- 4425\/4225\u003cbr\u003e- 4425A\/4225A\u003c\/p\u003e\n\u003cp\u003eThe cable is 5-ft 10-inches long (1.8 meters).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667290120505,"sku":"pt-TA155","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/16329.jpg?v=1689076726"},{"product_id":"battery-clip-4mm-socket-red","title":"Battery Clip 4mm socket (red)","description":"\u003cp\u003eThis plier-type clip is designed for connection to the vehicle battery terminals and connections to test leads with 4 mm banana plug ends.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667290349881,"sku":"pt-TA157","price":2.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Battery_Clip_4mm_socket__red__pt-TA157_1.webp?v=1744227154"},{"product_id":"battery-clip-4mm-socket-black","title":"Battery Clip 4mm socket (black)","description":"\u003cp\u003eThis plier-type clip is designed for connection to the vehicle battery terminals and connections to test leads with 4 mm banana plug ends.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667290743097,"sku":"pt-TA158","price":2.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Battery_Clip_4mm_socket__black__pt-TA158_1.webp?v=1744227157"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/collections\/Scope-stack.jpg?v=1693346101","url":"https:\/\/shop.aeswave.com\/es\/collections\/pico-technology.oembed?page=8","provider":"AESwave","version":"1.0","type":"link"}