{"title":"Lab Scopes - Pico","description":"","products":[{"product_id":"picoscope-4823-8-channel-automotive-oscilloscope","title":"PicoScope 4823 8-channel Automotive Oscilloscope","description":"\u003cp\u003e(AES# pt-PQ185)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe 4823 is a high-resolution, 8-channel automotive oscilloscope that features a common-ground configuration, a maximum input range of 50V (protected to 100V), and a maximum sample rate of 80MS\/s (10MS\/s if using all 8 channels).\u003c\/p\u003e\n\u003cp\u003eThe 4823 is the same 8-channel automotive scope module included with the \u003ca href=\"https:\/\/www.aeswave.com\/PicoScope-4823-8-channel-Automotive-Oscilloscope-p9708.html\"\u003ePico PQ184 Professional Diagnostic Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe scope includes protection fuses on the eight inputs and is compatible with the PicoScope Automotive software.\u003cbr\u003e- fast enough for CAN, CAN FD, and FlexRay including serial data decoding\u003cbr\u003e- pre-configured for automotive probes\u003cbr\u003e- compatible with Pico Automotive software which includes more than 150 Guided tests\u003cbr\u003e- provides access to the Pico waveform library which now supports 8 channels\u003cbr\u003e- 12-bit resolution\u003cbr\u003e- 20 MHz bandwidth\u003cbr\u003e- 256 MS buffer memory\u003cbr\u003e- SuperSpeed USB 3.0 interface\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComparison 4823 vs 4425\u003c\/strong\u003e\u003cbr\u003e- 50V vs 200V inputs \u003cbr\u003e- 80MS\/s vs 400MS\/s\u003cbr\u003e- Common ground vs Floating inputs\u003cbr\u003e- No ConnectDetect™ vs ConnectDetect™\u003cbr\u003e- No hardware filter available vs Hardware filter available\u003cbr\u003e- No bracket vs Integral hanging bracket\u003cbr\u003e- End caps vs Protective rubber boot\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy use an 8-channel scope?\u003c\/strong\u003e\u003cbr\u003e- V6\/V8 Cam timing (4\/6 cams plus crank, and sometimes a WPS), and VVT timing systems.\u003cbr\u003e- Trucks, construction and agriculture equipment where technicians require a mix of electrical and hydraulic measurements on multiple valves simultaneously to diagnose problems with system\u003cbr\u003einteraction.\u003cbr\u003e- Full system diagnosis on components (including power, ground, signals, current)\u003cbr\u003e- General engine diagnostics\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePicoScope 4823 8-channel Automotive Oscilloscope contents\u003c\/b\u003e\u003cbr\u003e- PicoScope 44823 8-channel oscilloscope module\u003cbr\u003e- USB Cable- Quick start guide\u003cbr\u003e- 2-year warranty\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667419750713,"sku":"pt-PQ185","price":2914.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/PicoScope_4823_8-channel_Automotive_Oscilloscope_pt-PQ185_1.webp?v=1744225369"},{"product_id":"picoscope-4823-8-channel-professional-diagnostic-kit","title":"PicoScope 4823 8-Channel Professional Diagnostic Kit","description":"\u003cp\u003e(AES# pt-PQ184)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe PQ184 8-Channel Professional Diagnostic Kit includes the PicoScope 4823, a high-resolution, 8-channel automotive oscilloscope that features a common-ground configuration, a maximum input range of 50V (protected to 100V), and a maximum sample rate of 80MS\/s (10MS\/s if using all 8 channels).\u003c\/p\u003e\n\u003cp\u003eThe PicoScope 4823 is a low-cost, portable solution for multi-input applications. With 8 high-resolution, high-speed analog channels you have a perfect solution for a range of diagnostic needs such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eV6\/V8 Cam timing (4\/6 cams plus crank, and sometimes a WPS), and VVT timing systems.\u003c\/li\u003e\n\u003cli\u003eTrucks, construction and agriculture equipment that typically requires a mix of electrical and hydraulic measurements on multiple valves simultaneously to diagnose problems with system interaction.\u003c\/li\u003e\n\u003cli\u003eFull system diagnosis on components (including power, ground, signals, current)\u003c\/li\u003e\n\u003cli\u003eDiagnosing faults on multiple serial busses (CAN, CAN FD, LIN, FlexRay)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 256 MS deep memory allows several seconds of capture at the full sampling rate (ideal for long captures of serial data or looking for glitches). Managing all this data calls for some powerful tools which are built into PicoScope software: zoom factors of several million are possible, waveform buffer, mask limit test, serial decode, hardware acceleration, deep memory making the PicoScope 4823 one of the most powerful diagnostic oscilloscopes on the market.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cfooter\u003e\n\u003cp\u003e\u003cb\u003ePQ184 PicoScope 4823 8-Channel Professional Diagnostic Kit contents\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/footer\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003eTo ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667420340537,"sku":"pt-PQ184","price":6401.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/PicoScope_4823_8-Channel_Professional_Diagnostic_Kit_pt-PQ184_1.jpg?v=1750798065"},{"product_id":"picoscope-2-channel-4225a-automotive-oscilloscope-pq173","title":"PicoScope 2-Channel 4225A Automotive Oscilloscope (PQ173)","description":"\u003cp\u003e(AES# pt-PQ173)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"320\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/850UroANtds?rel=0\u0026amp;showinfo=0\u0026amp;ecver=2%22style=%22position:absolute;width:100%25;height:100%25;left:0\" width=\"599\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe PicoScope 4225A with PicoBNC+™ connectors makes it easier than ever for new users to become efficient and productive with PicoScope while saving valuable time for more experienced users.\u003c\/p\u003e\n\u003cp\u003eThe 4225A is available in a variety of kit configurations that include a wide assortment of test probes to take advantage of the new PicoBNC+™ connector.\u003c\/p\u003e\n\u003cp\u003eThe PicoBNC+™ provides a physical and digital connection between the 4225A scope and a test probe equipped with the PicoBNC+™ mate.\u003cbr\u003e• Push it on, pinch and pull it off; does not require a twist like the old-fashioned BNC connectors. \u003cbr\u003e• It provides power from the scope to the probe, great for overnight battery drain tests! \u003cbr\u003e• It allows the probe to identify itself to PicoScope software which will auto-configure for that specific probe.\u003cbr\u003e• It will auto-zero a current clamp. \u003cbr\u003eThe PicoBNC+™ is backwards compatible with your existing Pico or third-party probes equiped with a traditional BNC connector which only provides a physical connection to the scope.\u003c\/p\u003e\n\u003cp\u003eThe front panel of the PicoScope 4225A with PicoBNC+™ includes bright status lights for each channel. After loading a data file or selecting a guided test, PicoScope 7 software will show you which probe to use and the status lights will indicate which channel to connect it to. If you connect the wrong probe the software will alert you.\u003c\/p\u003e\n\u003cp\u003eUsing a PicoScope has never been faster, easier or more reliable.\u003c\/p\u003e\n\u003cp\u003eThe PicoScope 4225A scope module includes the hardware features that has made PicoScope the most powerful and versatile automotive scope, \u003ca href=\"#productTab-custom1\" onclick=\"javascript:showTab('custom1');javascript:recalculatePageHeight();\"\u003eview the hardware comparison table.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e• 400 M samples\/second and 20 MHz bandwidth to make sure you can test the latest vehicles such as those with high-speed FlexRay or CAN-FD networks\u003cbr\u003e• 12-bit (16-bit enhanced) resolution - your waveforms in high definition\u003cbr\u003e• 250 M sample memory buffer for long-duration captures; ideal when you are trying to diagnose intermittent faults\u003cbr\u003e• USB 3.0 data transfer speeds and power, providing you with high performance and portability\u003cbr\u003e• Floating inputs for non-grounded measurements and voltage drop tests\u003cbr\u003e• 200 V input range\u003cbr\u003e• ConnectDetect® to ensure you have a good connection\u003cbr\u003e• Hardware filters and frequency measurement\u003cbr\u003e• Advanced digital triggers. Unique among automotive oscilloscopes, these trigger modes allow you to trigger when there is too long a time gap (such as when an injector fails to fire). They can also trigger and sound an alarm when a sensor signal goes out of range.\u003cbr\u003e• Filters. Some signals are noisy, as wires in the loom pick up noise from other sources. The vehicle ECUs filter this noise out. The PicoScope 4225A has selectable hardware filters to remove this noise, so you see what the ECU sees.\u003cbr\u003e• Hardware frequency measurement. Flow sensors and some airflow sensors output a digital frequency signal. Most oscilloscopes can't extract usable diagnostic information from this, but your PicoScope can convert it to a conventional analog waveform (as shown in this MAF sensor example).\u003cbr\u003e• Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e• Compatible with Pico NVH interfaces.\u003c\/p\u003e\n\u003cp\u003eThe PicoScope 4225A is compatible with PicoScope 6 and 7 software. Future development of the software will focus on PicoScope 7 which features a touchscreen and tablet-friendly user interface and is compatible with Windows (Linux and macOS in the works). When used with PicoBNC+™ probes, PicoScope software (6 and 7) sets up your scope automatically and allows you to use channel, sampling and trigger controls to capture your waveform precisely as you want it. The tradition of free software updates continues as Pico continuously improves the capabilities of their software. \u003ca href=\"#productTab-custom1\" onclick=\"javascript:showTab('custom1');javascript:recalculatePageHeight();\"\u003eView a comparison table of PicoScope 6 and 7 software.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22202.png?v=1689077566?1586566316\" target=\"_blank\"\u003e\u003cimg alt=\"PicoScope 6 vs 7 screen layout Comparison\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22202.png?v=1689077566?1586566316\" style=\"width: 599px; height: 262px;\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003cspan style=\"font-size: 9px;\"\u003eImage courtesy of Pico Technology\u003c\/span\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667443310905,"sku":"pt-PQ173","price":1021.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/PicoScope_2-Channel_4225A_Automotive_Oscilloscope__PQ173__pt-PQ173_1.webp?v=1744226878"},{"product_id":"picoscope-4-channel-4425a-automotive-oscilloscope-pq174","title":"PicoScope 4-Channel 4425A Automotive Oscilloscope (PQ174)","description":"\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22205.jpg?v=1689077570?1586566952\" style=\"width: 499px; height: 117px;\"\u003e\u003cbr\u003eThe PicoScope 4425A with PicoBNC+™ connectors makes it easier than ever for new users to become efficient and productive with PicoScope while saving valuable time for more experienced users.\u003c\/p\u003e\n\u003cp\u003eThe 4425A is available in a variety of kit configurations that include a wide assortment of test probes to take advantage of the new PicoBNC+™ connector.\u003c\/p\u003e\n\u003cp\u003eThe PicoBNC+™ provides a physical and digital connection between the 4425A scope and a test probe equipped with the PicoBNC+™ mate.\u003cbr\u003e• Push it on, pinch and pull it off; does not require a twist like the old-fashioned BNC connectors. \u003cbr\u003e• It provides power from the scope to the probe, great for overnight battery drain tests! \u003cbr\u003e• It allows the probe to identify itself to PicoScope software which will auto-configure for that specific probe.\u003cbr\u003e• It will auto-zero a current clamp. \u003cbr\u003eThe PicoBNC+™ is backwards compatible with your existing Pico or third-party probes equiped with a traditional BNC connector which only provides a physical connection to the scope.\u003c\/p\u003e\n\u003cp\u003eThe front panel of the PicoScope 4425A with PicoBNC+™ includes bright status lights for each channel. After loading a data file or selecting a guided test, PicoScope 7 software will show you which probe to use and the status lights will indicate which channel to connect it to. If you connect the wrong probe the software will alert you.\u003c\/p\u003e\n\u003cp\u003eUsing a PicoScope has never been faster, easier or more reliable.\u003c\/p\u003e\n\u003cp\u003eThe PicoScope 4425A scope module includes the hardware features that has made PicoScope 4425 the most powerful and versatile automotive scope, \u003ca href=\"#productTab-custom1\"\u003eview the hardware comparison table.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e• 400 M samples\/second and 20 MHz bandwidth to make sure you can test the latest vehicles such as those with high-speed FlexRay or CAN-FD networks\u003cbr\u003e• 12-bit (16-bit enhanced) resolution - your waveforms in high definition\u003cbr\u003e• 250 M sample memory buffer for long-duration captures; ideal when you are trying to diagnose intermittent faults\u003cbr\u003e• USB 3.0 data transfer speeds and power, providing you with high performance and portability\u003cbr\u003e• Floating inputs for non-grounded measurements and voltage drop tests\u003cbr\u003e• 200 V input range\u003cbr\u003e• ConnectDetect® to ensure you have a good connection\u003cbr\u003e• Hardware filters and frequency measurement\u003cbr\u003e• Advanced digital triggers. Unique among automotive oscilloscopes, these trigger modes allow you to trigger when there is too long a time gap (such as when an injector fails to fire). They can also trigger and sound an alarm when a sensor signal goes out of range.\u003cbr\u003e• Filters. Some signals are noisy, as wires in the loom pick up noise from other sources. The vehicle ECUs filter this noise out. The PicoScope 4425A has selectable hardware filters to remove this noise, so you see what the ECU sees.\u003cbr\u003e• Hardware frequency measurement. Flow sensors and some airflow sensors output a digital frequency signal. Most oscilloscopes can't extract usable diagnostic information from this, but your PicoScope can convert it to a conventional analog waveform (as shown in this MAF sensor example).\u003cbr\u003e• Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e• Compatible with Pico NVH interfaces.\u003c\/p\u003e\n\u003cp\u003eThe PicoScope 4425A is compatible with PicoScope 6 and 7 software. PicoScope 7 user interface is optimized for touchscreen\/tablet devices and is compatible with Windows (Linux and macOS in the works). When used with PicoBNC+™ probes, PicoScope software (6 and 7) sets up your scope automatically and allows you to use channel, sampling and trigger controls to capture your waveform precisely as you want it. The tradition of free software updates continues as Pico continuously improves the capabilities of their software. \u003ca href=\"#productTab-custom1\"\u003eView a comparison table of PicoScope 6 and 7 software.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22202.png?v=1689077566?1586566316\" target=\"_blank\"\u003e\u003cimg alt=\"PicoScope 6 vs 7 screen layout Comparison\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22202.png?v=1689077566?1586566316\" style=\"width: 598px; height: 262px;\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003cspan style=\"font-size: 9px;\"\u003eImage courtesy of Pico Technology\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4425A 4-channel scope module (PR340)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - Carton: Large Pico branded (Cardboard) (PA050)\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e1 - 24-months - Scope module\u003cbr\u003e1 - 12-months - all other items\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667443409209,"sku":"pt-PQ174","price":1634.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/PicoScope_4-Channel_4425A_Automotive_Oscilloscope__PQ174__pt-PQ174_1.webp?v=1744226892"},{"product_id":"2-channel-pico-4225a-starter-diagnostic-kit-pq175","title":"2-Channel Pico 4225A STARTER Diagnostic Kit (PQ175)","description":"\u003cp\u003e\u003ciframe height=\"320\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/850UroANtds?rel=0\u0026amp;showinfo=0\u0026amp;ecver=2%22style=%22position:absolute;width:100%25;height:100%25;left:0\" width=\"599\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eThe Pico PQ175 STARTER Diagnostic Kit includes the 4225A Picoscope module, two PicoBNC+™ test leads and a few accessories. The 4225A uses PicoScope Automotive software which is updated continuously with no subscription costs or in-app purchases. This kit offers a cost-friendly beginning for technicians beginning their PicoScope journey and for those who want to upgrade to the 4425A.\u003c\/p\u003e\n\u003cp\u003eThe 4225A generation of Picoscope utilizes PicoBNC+™ that provides smart probe interfacing, powered probes, and status lights on each channel, as well as full compatibility with your existing PicoScope or third-party BNC probes.\u003c\/p\u003e\n\u003cp\u003eThe unique capabilities and characteristics of the PicoBNC+™ include:\u003cbr\u003e• Push to connect, does not require a twist like old-fashioned BNC connectors. \u003cbr\u003e• Identifies the probe to PicoScope software which will auto-configure for that specific probe.\u003cbr\u003e• Provides power from the scope module to the probe, great for overnight battery drain tests! \u003cbr\u003e• Will Auto-zero current clamps and other probes.\u003cbr\u003e• Includes bright status lights for each channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope 4225A Hardware\u003c\/strong\u003e\u003cbr\u003eThe PicoScope 4225A scope module includes the features that make PicoScope hardware the most powerful and versatile automotive scope:\u003cbr\u003e• ±200 V to ±50 mV input ranges with floating inputs\u003cbr\u003e• Up to 400 M samples\/second (Fast enough for FlexRay, CAN FD etc.)\u003cbr\u003e• 512MB Deep Memory inside the scope (Capture intermittent faults that other scopes miss)\u003cbr\u003e• ConnectDetect® for confirmation of good contact\u003cbr\u003e• USB2 or USB3 connectivity to PC\u003cbr\u003e• Hardware frequency coupling\u003cbr\u003e• Hardware \u0026amp; software triggers and filters\u003cbr\u003e• NVH (Noise, Vibration \u0026amp; Harshness) diagnostics\u003cbr\u003e• Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e• Compatible with Pico NVH interfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope Software\u003c\/strong\u003e\u003cbr\u003ePico has continuously upgraded and improved their Windows-based automotive software for over 20 years. Beginning with PicoScope 7, it is optimized for touchscreen\/tablet devices and will become compatible with Linux and macOS. With PicoScope software you can:\u003cbr\u003e• Set up your scope quickly with over 150 guided tests\u003cbr\u003e• Auto-configure PicoBNC+™ probes \u003cbr\u003e• See your waveforms in high definition and with minimal delay.\u003cbr\u003e• Evaluate your waveforms with powerful tools: Math channels, Masks\/Alarms, Serial Decoding, Rotation\/Phase markers (ex. 720 degree rotation)\u003cbr\u003e• Save and share your waveforms\u003cbr\u003e• Exclusive access to the Pico Waveform Library with over 5500 entries.\u003cbr\u003e• PicoDiagnostics for NVH, Cylinder compression, battery, alternator and starter testing, cylinder misfires \/ balance\u003cbr\u003e• Get free updates for PicoScope Automotive software with no subscriptions or in-app purchases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents of the Pico PQ175 STARTER Diagnostic Kit\u003cbr\u003e\u003cimg alt=\"Contents of the Pico PQ175 STARTER Diagnostic Kit\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22163.png?v=1689077574?1586867172\" style=\"width: 360px; height: 292px;\"\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4225A 2-channel scope module (PR341)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Blue, 4mm permanent ground (TA404)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Red, 4mm permanent ground (TA405)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e2 - Small crocodile clip (black) (TA003)\u003cbr\u003e2 - Small crocodile clip (red) (TA004)\u003cbr\u003e1 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e1 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e2 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e2 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - Carton: Large Pico branded (Cardboard) (PA050)\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e1 - 24-months - Scope module\u003cbr\u003e1 - 12-months - all other items\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003eTo ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667443474745,"sku":"pt-PQ175","price":1161.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/2-Channel_Pico_4225A_STARTER_Diagnostic_Kit__PQ175__pt-PQ175_1.webp?v=1744226905"},{"product_id":"4-channel-pico-4425a-starter-diagnostic-kit-pq176","title":"4-Channel Pico 4425A STARTER Diagnostic Kit (PQ176)","description":"\u003cp\u003eThe Pico PQ176 STARTER Diagnostic Kit includes the 4425A Picoscope module, four PicoBNC+™ test leads and a few accessories. The 4425A uses PicoScope Automotive software which is updated continuously with no subscription costs or in-app purchases. This kit offers a cost-friendly beginning for technicians beginning their PicoScope journey and for those who want to upgrade to the 4425A.\u003c\/p\u003e\n\u003cp\u003eThe 4425A generation of Picoscope utilizes PicoBNC+™ that provides smart probe interfacing, powered probes, and status lights on each channel, as well as full compatibility with your existing PicoScope or third-party BNC probes. Image below shows probes with PicoBNC+™ and traditional BNC connected to the 4425A.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22258.png?v=1689077578?1586974906\" style=\"width: 500px; height: 125px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe unique capabilities and characteristics of the PicoBNC+™ include:\u003cbr\u003e• Push to connect, does not require a twist like old-fashioned BNC connectors. \u003cbr\u003e• Identifies the probe to PicoScope software which will auto-configure for that specific probe.\u003cbr\u003e• Provides power from the scope module to the probe, great for overnight battery drain tests! \u003cbr\u003e• Will Auto-zero current clamps and other probes.\u003cbr\u003e• Includes bright status lights for each channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope 4425A Hardware\u003c\/strong\u003e\u003cbr\u003eThe PicoScope 4425A scope module includes the features that make PicoScope hardware the most powerful and versatile automotive scope:\u003cbr\u003e• ±200 V to ±50 mV input ranges with floating inputs\u003cbr\u003e• Up to 400 M samples\/second (Fast enough for FlexRay, CAN FD etc.)\u003cbr\u003e• 512MB Deep Memory inside the scope (Capture intermittent faults that other scopes miss)\u003cbr\u003e• ConnectDetect® for confirmation of good contact\u003cbr\u003e• USB2 or USB3 connectivity to PC\u003cbr\u003e• Hardware frequency coupling\u003cbr\u003e• Hardware \u0026amp; software triggers and filters\u003cbr\u003e• NVH (Noise, Vibration \u0026amp; Harshness) diagnostics\u003cbr\u003e• Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e• Compatible with Pico NVH interfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope Software\u003c\/strong\u003e\u003cbr\u003ePico has continuously upgraded and improved their Windows-based automotive software for over 20 years. Beginning with PicoScope 7, it is optimized for touchscreen\/tablet devices and will become compatible with Linux and macOS. With PicoScope software you can:\u003cbr\u003e• Set up your scope quickly with over 150 guided tests\u003cbr\u003e• Auto-configure PicoBNC+™ probes \u003cbr\u003e• See your waveforms in high definition and with minimal delay.\u003cbr\u003e• Evaluate your waveforms with powerful tools: Math channels, Masks\/Alarms, Serial Decoding, Rotation\/Phase markers (eg 720 degree rotation)\u003cbr\u003e• Save and share your waveforms\u003cbr\u003e• Exclusive access to the Pico Waveform Library with over 5500 entries.\u003cbr\u003e• PicoDiagnostics for NVH, Cylinder compression, battery, alternator and starter testing, cylinder misfires \/ balance\u003cbr\u003e• Get free updates for PicoScope Automotive software with no subscriptions or in-app purchases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents of the Pico PQ176 STARTER Diagnostic Kit \u003cbr\u003e\u003cimg alt=\"Contents of the Pico PQ176 STARTER Diagnostic Kit\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22169.png?v=1689077580?1586867086\" style=\"width: 360px; height: 345px;\"\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4425A 4-channel scope module (PR340)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Blue, 4mm permanent ground (TA404)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Red, 4mm permanent ground (TA405)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Green, 4mm permanent ground (TA406)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Yellow, 4mm permanent ground (TA407)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e1 - Multimeter style test probe (black) (TA001)\u003cbr\u003e1 - Multimeter style test probe (red) (TA002)\u003cbr\u003e2 - Small crocodile clip (black) (TA003)\u003cbr\u003e2 - Small crocodile clip (red) (TA004)\u003cbr\u003e1 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e2 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e2 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e2 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - Carton: Large Pico branded (Cardboard) (PA050)\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e1 - 24-months - Scope module\u003cbr\u003e1 - 12-months - all other items\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003eTo ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667443966265,"sku":"pt-PQ176","price":1973.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/4-Channel_Pico_4425A_STARTER_Diagnostic_Kit__PQ176__pt-PQ176_1.webp?v=1744226911"},{"product_id":"2-channel-pico-4225a-standard-diagnostic-kit-pq177","title":"2-Channel Pico 4225A STANDARD Diagnostic Kit (PQ177)","description":"\u003cp\u003e(AES# pt-PQ177)\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eThe Pico PQ177 STANDARD Diagnostic Kit includes the 4225A Picoscope module, PicoBNC+™ test probes, and accessories in a sturdy carrying case. The 4225A uses PicoScope Automotive software which is updated continuously with no subscription costs or in-app purchases. It's easy for students and novices to use, and powerful enough for Master Technicians, trainers, and instructors.\u003c\/p\u003e\n\u003cp\u003eThe 4225A generation of Picoscope utilizes PicoBNC+™ that provides smart probe interfacing, powered probes, and status lights on each channel, as well as full compatibility with your existing PicoScope or third-party BNC probes.\u003c\/p\u003e\n\u003cp\u003eThe unique capabilities and characteristics of the PicoBNC+™ include:\u003cbr\u003e • Push to connect, does not require a twist like old-fashioned BNC connectors. \u003cbr\u003e • Identifies the probe to PicoScope software which will auto-configure for that specific probe.\u003cbr\u003e • Provides power from the scope module to the probe, great for overnight battery drain tests! \u003cbr\u003e • Will Auto-zero current clamps and other probes.\u003cbr\u003e • Includes bright status lights for each channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope 4225A Hardware\u003c\/strong\u003e\u003cbr\u003e The PicoScope 4225A scope module includes the features that make PicoScope hardware the most powerful and versatile automotive scope:\u003cbr\u003e • ±200 V to ±50 mV input ranges with floating inputs\u003cbr\u003e • Up to 400 M samples\/second (Fast enough for FlexRay, CAN FD etc.)\u003cbr\u003e • 512MB Deep Memory inside the scope (Capture intermittent faults that other scopes miss)\u003cbr\u003e • ConnectDetect® for confirmation of good contact\u003cbr\u003e • USB2 or USB3 connectivity to PC\u003cbr\u003e • Hardware frequency coupling\u003cbr\u003e • Hardware \u0026amp; software triggers and filters\u003cbr\u003e • NVH (Noise, Vibration \u0026amp; Harshness) diagnostics\u003cbr\u003e • Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e • Compatible with Pico NVH interfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope Software\u003c\/strong\u003e\u003cbr\u003e Pico has continuously upgraded and improved their Windows-based automotive software for over 20 years. Beginning with PicoScope 7, it is optimized for touchscreen\/tablet devices and will become compatible with Linux and macOS. With PicoScope software you can:\u003cbr\u003e • Set up your scope quickly with over 150 guided tests\u003cbr\u003e • Auto-configure PicoBNC+™ probes \u003cbr\u003e • See your waveforms in high definition and with minimal delay.\u003cbr\u003e • Evaluate your waveforms with powerful tools: Math channels, Masks\/Alarms, Serial Decoding, Rotation\/Phase markers (eg 720 degree rotation)\u003cbr\u003e • Save and share your waveforms\u003cbr\u003e • Exclusive access to the Pico Waveform Library with over 5500 entries.\u003cbr\u003e • PicoDiagnostics for NVH, Cylinder compression, battery, alternator and starter testing, cylinder misfires \/ balance\u003cbr\u003e • Get free updates for PicoScope Automotive software with no subscriptions or in-app purchases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents of the Pico PQ177 STARTER Diagnostic Kit\u003cbr\u003e\u003cimg alt=\"Contents of the Pico PQ177 STARTER Diagnostic Kit\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22166.png?v=1689077589?1586867017\" style=\"width: 360px; height: 360px;\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e1 - Pico 4225A 2-channel scope module (PR341)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e 1 - PicoBNC+ 3-meter Test Lead: Blue, 4mm permanent ground (TA404)\u003cbr\u003e 1 - PicoBNC+ 3-meter Test Lead: Red, 4mm permanent ground (TA405)\u003cbr\u003e 1 - PicoBNC+ 10:1 scope probe (TA499)\u003cbr\u003e\u003cem\u003eIgnition\u003c\/em\u003e\u003cbr\u003e 2 - PicoBNC+ secondary ignition pickup (TA397)\u003cbr\u003e 1 - PicoBNC+ COP probe (TA398)\u003cbr\u003e 1 - Earth wire for coil pack 45cm long (TA106)\u003cbr\u003e 1 - HT extension test lead (TA037)\u003cbr\u003e\u003cem\u003eCurrent \u003c\/em\u003e\u003cbr\u003e 1 - PicoBNC+ 60A AC\/DC Current Clamp (TA473)\u003cbr\u003e 1 - PicoBNC+ 200A\/2000A AC\/DC Current Clamp (TA388)\u003cbr\u003e 1 - Fuse Extension Lead for ATC (TA034)\u003cbr\u003e 1 - Fuse Extension Lead for Mini (TA035)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e 1 - Small crocodile clip (black) (TA003)\u003cbr\u003e 1 - Small crocodile clip (red) (TA004)\u003cbr\u003e 1 - Multimeter style test probe (black) (TA001)\u003cbr\u003e 1 - Multimeter style test probe (red) (TA002)\u003cbr\u003e 1 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e 1 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e 2 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e 2 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e 2 - 4mm shrouded to unshrouded adaptor red (TA017)\u003cbr\u003e 1 - Electronics Acupuncture Probes (TA008)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e 1 - S Hook (Ml168)\u003cbr\u003e 1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e 1 - Carry Case : 4425A Standard (PA209)\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e 1 - 24-months - Scope module\u003cbr\u003e 1 - 12-months - all other items\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003e To ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667445506361,"sku":"pt-PQ177","price":2566.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/2-Channel_Pico_4225A_STANDARD_Diagnostic_Kit__PQ177__pt-PQ177_1.webp?v=1744226917"},{"product_id":"4-channel-pico-4425a-standard-diagnostic-kit-pq178","title":"4-Channel Pico 4425A STANDARD Diagnostic Kit (PQ178)","description":"\u003cp\u003e\u003ciframe height=\"320\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/850UroANtds?rel=0\u0026amp;showinfo=0\u0026amp;ecver=2%22style=%22position:absolute;width:100%25;height:100%25;left:0\" width=\"599\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eThe Pico PQ178 STANDARD Diagnostic Kit includes the 4425A Picoscope module, PicoBNC+™ test probes, and accessories in a sturdy carrying case. The 4425A uses PicoScope Automotive software which is updated continuously with no subscription costs or in-app purchases. It's easy for students and novices to use, and powerful enough for Master Technicians, trainers, and instructors.\u003c\/p\u003e\n\u003cp\u003eThe 4425A generation of Picoscope utilizes PicoBNC+™ that provides smart probe interfacing, powered probes, and status lights on each channel, as well as full compatibility with your existing PicoScope or third-party BNC probes. Image below shows probes with PicoBNC+™ and traditional BNC connected to the 4425A.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22258.png?v=1689077578?1586974906\" style=\"width: 500px; height: 125px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe unique capabilities and characteristics of the PicoBNC+™ include:\u003cbr\u003e• Push to connect, does not require a twist like old-fashioned BNC connectors. \u003cbr\u003e• Identifies the probe to PicoScope software which will auto-configure for that specific probe.\u003cbr\u003e• Provides power from the scope module to the probe, great for overnight battery drain tests! \u003cbr\u003e• Will Auto-zero current clamps and other probes.\u003cbr\u003e• Includes bright status lights for each channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope 4425A Hardware\u003c\/strong\u003e\u003cbr\u003eThe PicoScope 4425A scope module includes the features that make PicoScope hardware the most powerful and versatile automotive scope:\u003cbr\u003e• ±200 V to ±50 mV input ranges with floating inputs\u003cbr\u003e• Up to 400 M samples\/second (Fast enough for FlexRay, CAN FD etc.)\u003cbr\u003e• 512MB Deep Memory inside the scope (Capture intermittent faults that other scopes miss)\u003cbr\u003e• ConnectDetect® for confirmation of good contact\u003cbr\u003e• USB2 or USB3 connectivity to PC\u003cbr\u003e• Hardware frequency coupling\u003cbr\u003e• Hardware \u0026amp; software triggers and filters\u003cbr\u003e• NVH (Noise, Vibration \u0026amp; Harshness) diagnostics\u003cbr\u003e• Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e• Compatible with Pico NVH interfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope Software\u003c\/strong\u003e\u003cbr\u003ePico has continuously upgraded and improved their Windows-based automotive software for over 20 years. Beginning with PicoScope 7, it is optimized for touchscreen\/tablet devices and will become compatible with Linux and macOS. With PicoScope software you can:\u003cbr\u003e• Set up your scope quickly with over 150 guided tests\u003cbr\u003e• Auto-configure PicoBNC+™ probes \u003cbr\u003e• See your waveforms in high definition and with minimal delay.\u003cbr\u003e• Evaluate your waveforms with powerful tools: Math channels, Masks\/Alarms, Serial Decoding, Rotation\/Phase markers (eg 720 degree rotation)\u003cbr\u003e• Save and share your waveforms\u003cbr\u003e• Exclusive access to the Pico Waveform Library with over 5500 entries.\u003cbr\u003e• PicoDiagnostics for NVH, Cylinder compression, battery, alternator and starter testing, cylinder misfires \/ balance\u003cbr\u003e• Get free updates for PicoScope Automotive software with no subscriptions or in-app purchases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents of the Pico PQ178 STANDARD Diagnostic Kit \u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22172.png?v=1689077594\" style=\"width: 360px; height: 344px;\"\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4425A 4-channel scope module (PR340)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Blue, 4mm permanent ground (TA404)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Red, 4mm permanent ground (TA405)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Green, 4mm permanent ground (TA406)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Yellow, 4mm permanent ground (TA407)\u003cbr\u003e1 - PicoBNC+ 10:1 scope probe (TA499)\u003cbr\u003e\u003cem\u003eIgnition\u003c\/em\u003e\u003cbr\u003e2 - PicoBNC+ secondary ignition pickup (TA397)\u003cbr\u003e1 - PicoBNC+ COP probe (TA398)\u003cbr\u003e1 - Earth wire for coil pack 45cm long (TA106)\u003cbr\u003e2 - HT extension test lead (TA037)\u003cbr\u003e\u003cem\u003eCurrent \u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 60A AC\/DC Current Clamp (TA473)\u003cbr\u003e1 - PicoBNC+ 200A\/2000A AC\/DC Current Clamp (TA388)\u003cbr\u003e1 - Fuse Extension Lead for ATC (TA034)\u003cbr\u003e1 - Fuse Extension Lead for Mini (TA035)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e2 - Small crocodile clip (black) (TA003)\u003cbr\u003e2 - Small crocodile clip (red) (TA004)\u003cbr\u003e2 - Multimeter style test probe (black) (TA001)\u003cbr\u003e2 - Multimeter style test probe (red) (TA002)\u003cbr\u003e2 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e2 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e4 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e4 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e4 - 4mm shrouded to unshrouded adaptor red (TA017)\u003cbr\u003e1 - Electronics Acupuncture Probes (TA008)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e1 - S Hook (Ml168)\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - Carry Case : 4425A Standard (PA209)\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e1 - 24-months - Scope module\u003cbr\u003e1 - 12-months - all other items\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003eTo ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/YSbI3-CN1fc?si=3REicx93D7CrW-Ed\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/8wzyBbL2rjs?si=kA-k1EYlacC7e9TJ\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/QUX6G-anwzg?si=INHnMBkrWobhL-2m\" title=\"YouTube video player\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667446423865,"sku":"pt-PQ178","price":3370.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/4-Channel_Pico_4425A_STANDARD_Diagnostic_Kit__PQ178__pt-PQ178_1.webp?v=1746656846"},{"product_id":"4-channel-pico-4425a-diesel-diagnostic-kit-pq179","title":"4-Channel Pico 4425A DIESEL Diagnostic Kit (PQ179)","description":"\u003cp\u003eThe \u003cstrong\u003ePico PQ179 DIESEL Diagnostic Kit\u003c\/strong\u003e is optimized for use on diesel powertrains. It includes the 4425A Picoscope module, PicoBNC+™ test probes (4 with extra long cables), fuse extensions (ATC, JCASE, Maxi, Mini), and accessories in a sturdy carrying case. Ignition probes are not included. The 4425A uses PicoScope Automotive software which is updated continuously with no subscription costs or in-app purchases. It's easy for students and novices to use, and powerful enough for Master Technicians, trainers, and instructors.\u003c\/p\u003e\n\u003cp\u003eThe 4425A generation of Picoscope utilizes PicoBNC+™ that provides smart probe interfacing, powered probes, and status lights on each channel, as well as full compatibility with your existing PicoScope or third-party BNC probes. Image below shows probes with PicoBNC+™ and traditional BNC connected to the 4425A.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22258.png?v=1689077578?1586974906\" style=\"height: 125px; width: 500px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe unique capabilities and characteristics of the PicoBNC+™ include:\u003cbr\u003e• Push to connect, does not require a twist like old-fashioned BNC connectors. \u003cbr\u003e• Identifies the probe to PicoScope software which will auto-configure for that specific probe.\u003cbr\u003e• Provides power from the scope module to the probe, great for overnight battery drain tests! \u003cbr\u003e• Will Auto-zero current clamps and other probes.\u003cbr\u003e• Includes bright status lights for each channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope 4425A Hardware\u003c\/strong\u003e\u003cbr\u003eThe PicoScope 4425A scope module includes the features that make PicoScope hardware the most powerful and versatile automotive scope:\u003cbr\u003e• ±200 V to ±50 mV input ranges with floating inputs\u003cbr\u003e• Up to 400 M samples\/second (Fast enough for FlexRay, CAN FD etc.)\u003cbr\u003e• 512MB Deep Memory inside the scope (Capture intermittent faults that other scopes miss)\u003cbr\u003e• ConnectDetect® for confirmation of good contact\u003cbr\u003e• USB2 or USB3 connectivity to PC\u003cbr\u003e• Hardware frequency coupling\u003cbr\u003e• Hardware \u0026amp; software triggers and filters\u003cbr\u003e• NVH (Noise, Vibration \u0026amp; Harshness) diagnostics\u003cbr\u003e• Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e• Compatible with Pico NVH interfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope Software\u003c\/strong\u003e\u003cbr\u003ePico has continuously upgraded and improved their Windows-based automotive software for over 20 years. Beginning with PicoScope 7, it is optimized for touchscreen\/tablet devices and will become compatible with Linux and macOS. With PicoScope software you can:\u003cbr\u003e• Set up your scope quickly with over 150 guided tests\u003cbr\u003e• Auto-configure PicoBNC+™ probes \u003cbr\u003e• See your waveforms in high definition and with minimal delay.\u003cbr\u003e• Evaluate your waveforms with powerful tools: Math channels, Masks\/Alarms, Serial Decoding, Rotation\/Phase markers (eg 720 degree rotation)\u003cbr\u003e• Save and share your waveforms\u003cbr\u003e• Exclusive access to the Pico Waveform Library with over 5500 entries.\u003cbr\u003e• PicoDiagnostics for NVH, Cylinder compression, battery, alternator and starter testing, cylinder misfires \/ balance\u003cbr\u003e• Get free updates for PicoScope Automotive software with no subscriptions or in-app purchases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents of the Pico PQ179 DIESEL Diagnostic Kit \u003cbr\u003e\u003cimg alt=\"Contents of the Pico PQ179 DIESEL Diagnostic Kit\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22175.png?v=1689077599?1586866894\" style=\"width: 360px; height: 360px;\"\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4425A 4-channel scope module (PR340)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Blue, 4mm permanent ground (TA475)\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Red, 4mm permanent ground (TA476)\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Green, 4mm permanent ground (TA477)\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Yellow, 4mm permanent ground (TA478)\u003cbr\u003e2 - PicoBNC+ 10:1 scope probe (TA499)\u003cbr\u003e1 - Ultrasonic Parking Sensor Detector (TA329)\u003cbr\u003e1 - Keyless Entry Detector (TA330)\u003cbr\u003e1 - 2-pin breakout lead (TA012)\u003cbr\u003e1 - Breakout Lead 2 pin ACS (TA190)\u003cbr\u003e1 - Breakout Lead 3 pin Kostal (TA191)\u003cbr\u003e\u003cem\u003eCurrent \u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 60A AC\/DC Current Clamp (TA473)\u003cbr\u003e1 - PicoBNC+ 200A\/2000A AC\/DC Current Clamp (TA388)\u003cbr\u003e1 - Fuse Extension Lead for ATC (TA034)\u003cbr\u003e1 - Fuse Extension Lead for Maxi (TA206)\u003cbr\u003e1 - Fuse Extension Lead for Mini (TA035)\u003cbr\u003e1 - Fuse Extension Lead for JCASE (TA168)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e2 - Small crocodile clip (black) (TA003)\u003cbr\u003e2 - Small crocodile clip (red) (TA004)\u003cbr\u003e2 - Multimeter style test probe (black) (TA001)\u003cbr\u003e2 - Multimeter style test probe (red) (TA002)\u003cbr\u003e2 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e2 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e4 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e4 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e4 - 4mm shrouded to unshrouded adaptor red (TA017)\u003cbr\u003e1 - Electronics Acupuncture Probes (TA008)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e2 - S Hook (Ml168)\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - USB Cable: 2.0, 4.5 meters (Mi121)\u003cbr\u003e1 - Carry Case : 4425A Standard (PA209)\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e1 - 24-months - Scope module\u003cbr\u003e1 - 12-months - all other items\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003eTo ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667448324409,"sku":"pt-PQ179","price":3341.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/4-Channel_Pico_4425A_DIESEL_Diagnostic_Kit__PQ179__pt-PQ179_1.webp?v=1744226923"},{"product_id":"4-channel-pico-4425a-advanced-diagnostic-kit-pq180","title":"4-Channel Pico 4425A ADVANCED Diagnostic Kit (PQ180)","description":"\u003cp\u003eThe Pico PQ180 ADVANCED Diagnostic Kit includes the 4425A Picoscope module, PicoBNC+™ test probes, fuse extensions (ATC, JCASE, Maxi, Mini), 6-way Breakout Lead Set and many other accessories in a sturdy carrying case. The 4425A uses PicoScope Automotive software which is updated continuously with no subscription costs or in-app purchases. It's easy for students and novices to use, and powerful enough for Master Technicians, trainers, and instructors.\u003c\/p\u003e\n\u003cp\u003eThe 4425A generation of Picoscope utilizes PicoBNC+™ that provides smart probe interfacing, powered probes, and status lights on each channel, as well as full compatibility with your existing PicoScope or third-party BNC probes. Image below shows probes with PicoBNC+™ and traditional BNC connected to the 4425A.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22258.png?v=1689077578?1586974906\" style=\"height: 125px; width: 500px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe unique capabilities and characteristics of the PicoBNC+™ include:\u003cbr\u003e• Push to connect, does not require a twist like old-fashioned BNC connectors. \u003cbr\u003e• Identifies the probe to PicoScope software which will auto-configure for that specific probe.\u003cbr\u003e• Provides power from the scope module to the probe, great for overnight battery drain tests! \u003cbr\u003e• Will Auto-zero current clamps and other probes.\u003cbr\u003e• Includes bright status lights for each channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope 4425A Hardware\u003c\/strong\u003e\u003cbr\u003eThe PicoScope 4425A scope module includes the features that make PicoScope hardware the most powerful and versatile automotive scope:\u003cbr\u003e• ±200 V to ±50 mV input ranges with floating inputs\u003cbr\u003e• Up to 400 M samples\/second (Fast enough for FlexRay, CAN FD etc.)\u003cbr\u003e• 512MB Deep Memory inside the scope (Capture intermittent faults that other scopes miss)\u003cbr\u003e• ConnectDetect® for confirmation of good contact\u003cbr\u003e• USB2 or USB3 connectivity to PC\u003cbr\u003e• Hardware frequency coupling\u003cbr\u003e• Hardware \u0026amp; software triggers and filters\u003cbr\u003e• NVH (Noise, Vibration \u0026amp; Harshness) diagnostics\u003cbr\u003e• Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e• Compatible with Pico NVH interfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope Software\u003c\/strong\u003e\u003cbr\u003ePico has continuously upgraded and improved their Windows-based automotive software for over 20 years. Beginning with PicoScope 7, it is optimized for touchscreen\/tablet devices and will become compatible with Linux and macOS. With PicoScope software you can:\u003cbr\u003e• Set up your scope quickly with over 150 guided tests\u003cbr\u003e• Auto-configure PicoBNC+™ probes \u003cbr\u003e• See your waveforms in high definition and with minimal delay.\u003cbr\u003e• Evaluate your waveforms with powerful tools: Math channels, Masks\/Alarms, Serial Decoding, Rotation\/Phase markers (eg 720 degree rotation)\u003cbr\u003e• Save and share your waveforms\u003cbr\u003e• Exclusive access to the Pico Waveform Library with over 5500 entries.\u003cbr\u003e• PicoDiagnostics for NVH, Cylinder compression, battery, alternator and starter testing, cylinder misfires \/ balance\u003cbr\u003e• Get free updates for PicoScope Automotive software with no subscriptions or in-app purchases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents of the Pico PQ180 ADVANCED Diagnostic Kit \u003c\/strong\u003e\u003cbr\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4425A 4-channel scope module (PR340)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Blue, 4mm permanent ground (TA404)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Red, 4mm permanent ground (TA405)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Green, 4mm permanent ground (TA406)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Yellow, 4mm permanent ground (TA407)\u003cbr\u003e2 - PicoBNC+ 10:1 scope probe (TA499)\u003cbr\u003e1 - PicoBNC+ resistance test lead (TA432)\u003cbr\u003e1 - PicoBNC+ Temperature probe (wide-range linear) (TA395)\u003cbr\u003e1 - Ultrasonic Parking Sensor Detector (TA329)\u003cbr\u003e1 - Premium 6-way breakout lead set (TA324)\u003cbr\u003e1 - 2-pin breakout lead (TA012)\u003cbr\u003e1 - Breakout Lead 2 pin ACS (TA190)\u003cbr\u003e\u003cem\u003eIgnition\u003c\/em\u003e\u003cbr\u003e4 - PicoBNC+ secondary ignition pickup (TA397)\u003cbr\u003e1 - PicoBNC+ COP probe (TA398)\u003cbr\u003e1 - Earth wire for coil pack 45cm long (TA106)\u003cbr\u003e4 - HT extension test lead (TA037)\u003cbr\u003e\u003cem\u003eCurrent \u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 60A AC\/DC Current Clamp (TA473)\u003cbr\u003e1 - PicoBNC+ 200A\/2000A AC\/DC Current Clamp (TA388)\u003cbr\u003e1 - Fuse Extension Lead for ATC (TA034)\u003cbr\u003e1 - Fuse Extension Lead for Maxi (TA206)\u003cbr\u003e1 - Fuse Extension Lead for Mini (TA035)\u003cbr\u003e1 - Fuse Extension Lead for JCASE (TA168)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e2 - Small crocodile clip (black) (TA003)\u003cbr\u003e2 - Small crocodile clip (red) (TA004)\u003cbr\u003e1 - Dolphin clip 1000V CATlll (black) (TA005)\u003cbr\u003e1 - Dolphin clip 1000V CATlll (red) (TA006)\u003cbr\u003e2 - Multimeter style test probe (black) (TA001)\u003cbr\u003e2 - Multimeter style test probe (red) (TA002)\u003cbr\u003e2 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e2 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e4 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e4 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e4 - 4mm shrouded to unshrouded adaptor red (TA017)\u003cbr\u003e1 - Electronics Acupuncture Probes (TA008)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e2 - S Hook (Ml168)\u003cbr\u003e1 - 6 pocket roll up pouch in black (PA147)\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - USB Cable: 2.0, 4.5 meters (Mi121)\u003cbr\u003e1 - Carry Case : 4425A Standard (PA209)\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e1 - 24-months - Scope module\u003cbr\u003e1 - 12-months - all other items\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003eTo ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667448389945,"sku":"pt-PQ180","price":4410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/4-Channel_Pico_4425A_ADVANCED_Diagnostic_Kit__PQ180__pt-PQ180_2.webp?v=1744230076"},{"product_id":"4-channel-pico-4425a-master-diagnostic-kit-pq194","title":"4-Channel Pico 4425A MASTER Diagnostic Kit (PQ194)","description":"\u003cp\u003eThe Pico PQ194 MASTER Diagnostic Kit includes almost everything Pico offers for a lab scope. In addition to the 4425A Picoscope module and PicoBNC+™ test probes, it includes fuse extensions (ATC, JCASE, Maxi, Mini), 6-way Breakout Lead Set, CAN Test Box, the WPS500X transducer and many other accessories in an extra large carrying case. The 4425A uses PicoScope Automotive software which is updated continuously with no subscription costs or in-app purchases. It's easy for students and novices to use, and powerful enough for Master Technicians, trainers, and instructors.\u003c\/p\u003e\n\u003cp\u003eThe 4425A generation of Picoscope utilizes PicoBNC+™ that provides smart probe interfacing, powered probes, and status lights on each channel, as well as full compatibility with your existing PicoScope or third-party BNC probes. Image below shows probes with PicoBNC+™ and traditional BNC connected to the 4425A.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22258.png?v=1689077578?1586974906\" style=\"height: 125px; width: 500px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe unique capabilities and characteristics of the PicoBNC+™ include:\u003cbr\u003e• Push to connect, does not require a twist like old-fashioned BNC connectors. \u003cbr\u003e• Identifies the probe to PicoScope software which will auto-configure for that specific probe.\u003cbr\u003e• Provides power from the scope module to the probe, great for overnight battery drain tests! \u003cbr\u003e• Will Auto-zero current clamps and other probes.\u003cbr\u003e• Includes bright status lights for each channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope 4425A Hardware\u003c\/strong\u003e\u003cbr\u003eThe PicoScope 4425A scope module includes the features that make PicoScope hardware the most powerful and versatile automotive scope:\u003cbr\u003e• ±200 V to ±50 mV input ranges with floating inputs\u003cbr\u003e• Up to 400 M samples\/second (Fast enough for FlexRay, CAN FD etc.)\u003cbr\u003e• 512MB Deep Memory inside the scope (Capture intermittent faults that other scopes miss)\u003cbr\u003e• ConnectDetect® for confirmation of good contact\u003cbr\u003e• USB2 or USB3 connectivity to PC\u003cbr\u003e• Hardware frequency coupling\u003cbr\u003e• Hardware \u0026amp; software triggers and filters\u003cbr\u003e• NVH (Noise, Vibration \u0026amp; Harshness) diagnostics\u003cbr\u003e• Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e• Compatible with Pico NVH interfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope Software\u003c\/strong\u003e\u003cbr\u003ePico has continuously upgraded and improved their Windows-based automotive software for over 20 years. Beginning with PicoScope 7, it is optimized for touchscreen\/tablet devices and will become compatible with Linux and macOS. With PicoScope software you can:\u003cbr\u003e• Set up your scope quickly with over 150 guided tests\u003cbr\u003e• Auto-configure PicoBNC+™ probes \u003cbr\u003e• See your waveforms in high definition and with minimal delay.\u003cbr\u003e• Evaluate your waveforms with powerful tools: Math channels, Masks\/Alarms, Serial Decoding, Rotation\/Phase markers (eg 720 degree rotation)\u003cbr\u003e• Save and share your waveforms\u003cbr\u003e• Exclusive access to the Pico Waveform Library with over 5500 entries.\u003cbr\u003e• PicoDiagnostics for NVH, Cylinder compression, battery, alternator and starter testing, cylinder misfires \/ balance\u003cbr\u003e• Get free updates for PicoScope Automotive software with no subscriptions or in-app purchases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents of the Pico PQ194 MASTER Diagnostic Kit \u003c\/strong\u003e\u003cbr\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4425A 4-channel scope module (PR340)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Blue, 4mm permanent ground (TA404)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Red, 4mm permanent ground (TA405)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Green, 4mm permanent ground (TA406)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Yellow, 4mm permanent ground (TA407)\u003cbr\u003e4 - PicoBNC+ 10:1 scope probe (TA499)\u003cbr\u003e1 - PicoBNC+ resistance test lead (TA432)\u003cbr\u003e1 - PicoBNC+ Temperature probe (wide-range linear) (TA395)\u003cbr\u003e1 - Ultrasonic Parking Sensor Detector (TA329)\u003cbr\u003e1 - Keyless Entry Detector (TA330)\u003cbr\u003e1 - Premium 6-way breakout lead set (TA324)\u003cbr\u003e1 - 2-pin breakout lead (TA012)\u003cbr\u003e1 - Breakout Lead 2 pin ACS (TA190)\u003cbr\u003e1 - Breakout Lead 3 pin Kostal (TA191)\u003cbr\u003e1 - Breakout Lead 2 pin Kostal (TA194)\u003cbr\u003e1 - Breakout lead 3 pin amp superseal (TA267)\u003cbr\u003e1 - CAN Test Box (TA069)\u003cbr\u003e\u003cem\u003eIgnition\u003c\/em\u003e\u003cbr\u003e4 - PicoBNC+ secondary ignition pickup (TA397)\u003cbr\u003e1 - PicoBNC+ COP probe (TA398)\u003cbr\u003e1 - Earth wire for coil pack 45cm long (TA106)\u003cbr\u003e4 - HT extension test lead (TA037)\u003cbr\u003e\u003cem\u003eCurrent \u003c\/em\u003e\u003cbr\u003e2 - PicoBNC+ 60A AC\/DC Current Clamp (TA473)\u003cbr\u003e1 - PicoBNC+ 200A\/2000A AC\/DC Current Clamp (TA388)\u003cbr\u003e1 - Fuse Extension Lead for ATC (TA034)\u003cbr\u003e1 - Fuse Extension Lead for Maxi (TA206)\u003cbr\u003e1 - Fuse Extension Lead for Mini (TA035)\u003cbr\u003e1 - Fuse Extension Lead for JCASE (TA168)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e2 - Small crocodile clip (black) (TA003)\u003cbr\u003e2 - Small crocodile clip (red) (TA004)\u003cbr\u003e1 - Dolphin clip 1000V CATlll (black) (TA005)\u003cbr\u003e1 - Dolphin clip 1000V CATlll (red) (TA006)\u003cbr\u003e2 - Multimeter style test probe (black) (TA001)\u003cbr\u003e2 - Multimeter style test probe (red) (TA002)\u003cbr\u003e2 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e2 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e1 - Shrouded 4mm to sprung hook (black) (TA089)\u003cbr\u003e1 - Shrouded 4mm to sprung hook (red) (TA090)\u003cbr\u003e4 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e4 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e4 - 4mm shrouded to unshrouded adaptor red (TA017)\u003cbr\u003e1 - Insulation piercing test clip (pack of 2) (TA007)\u003cbr\u003e1 - Electronics Acupuncture Probes (TA008)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e2 - S Hook (Ml168)\u003cbr\u003e1 - 6 pocket roll up pouch in black (PA147)\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - USB Cable: 2.0, 4.5 meters (Mi121)\u003cbr\u003e1 - Carry Case: PiBow Master Kit - Heavy 4040 Black (PA210)\u003cbr\u003e\u003cem\u003eTransducer\u003c\/em\u003e\u003cbr\u003e1 - WPS500X pressure transducer (TA071)\u003cbr\u003e1 - Cable: insulated BNC to insulated BNC, 5 meters (TA130)\u003cbr\u003e1 - Standard compression hose for WPS500 (TA212)\u003cbr\u003e1 - Adaptor M10 short reach (TA213)\u003cbr\u003e1 - Adaptor M10 deep reach (TA214)\u003cbr\u003e1 - Adaptor M12 deep reach (TA216)\u003cbr\u003e1 - Adaptor M14 short reach (TA217)\u003cbr\u003e1 - Adaptor M14 deep reach (TA218)\u003cbr\u003e1 - Adaptor M16 Ford Triton (TA219)\u003cbr\u003e1 - Adaptor M18 (TA220)\u003cbr\u003e1 - Exhaust adaptor for WPS500 pressure transducer (TA087)\u003cbr\u003e1 - Vacuum hose for WPS500 pressure transducer (TA085)\u003cbr\u003e1 - Bleed hose for WPS500 pressure transducer (TA086)\u003cbr\u003e1 - Universal vacuum adaptor (TA129)\u003cbr\u003e1 - Vacuum tap for WPS500 (brass) (TA226)\u003cbr\u003e1 - Fuel hose for WPS500, large schrader (TA083)\u003cbr\u003e1 - Fuel hose for WPS500, small Schrader (TA117)\u003cbr\u003e1 - Fuel hose pressure tap: small (brass) (TA235)\u003cbr\u003e1 - Fuel hose pressure tap: medium (brass) (TA236)\u003cbr\u003e1 - Foster 2 series quick couplerfemale to 1\/4 NPT male (TA142)\u003cbr\u003e1 - Adaptor WPS500 female to AST male (TA229)\u003cbr\u003e1 - Adaptor AST to WPS500 (TA224)\u003cbr\u003e1 - WPS500 Adaptor Kit B (TA250)\u003cbr\u003e1 - Large hose adaptor (Firstlook) (TA166)\u003cbr\u003e1 - USB Cable: A male to mini 5 pin, 2 meters (TA081)\u003cbr\u003e1 - Carry case: WPS500 compression adaptors (PA094)\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e1 - 24-months - Scope module\u003cbr\u003e1 - 12-months - all other items\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003eTo ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667448455481,"sku":"pt-PQ194","price":7445.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/4-Channel_Pico_4425A_MASTER_Diagnostic_Kit__PQ194__pt-PQ194_1.webp?v=1744230080"},{"product_id":"4-channel-pico-4425a-engine-and-hydraulics-kit-pq195","title":"4-Channel Pico 4425A Engine and Hydraulics Kit (PQ195)","description":"\u003cp\u003e(AES# pt-PQ195)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents of the Pico PQ195 Engine and Hydraulics Diagnostic Kit \u003c\/strong\u003e\u003cbr\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4425A 4-channel scope module (PR340)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Blue, 4mm permanent ground (PT475)\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Red, 4mm permanent ground (TA476)\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Green, 4mm permanent ground (TA477)\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Yellow, 4mm permanent ground (TA478)\u003cbr\u003e1 - PicoBNC+ 10:1 scope probe (TA499)\u003cbr\u003e1 - PicoBNC+ Temperature probe (wide-range linear) (TA395)\u003cbr\u003e1 - 2-pin breakout lead (TA012)\u003cbr\u003e1 - Breakout Lead 2 pin ACS (TA190)\u003cbr\u003e1 - Breakout Lead 3 pin Kostal (TA191)\u003cbr\u003e\u003cem\u003eCurrent \u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 60A AC\/DC Current Clamp (TA473)\u003cbr\u003e1 - PicoBNC+ 200A\/2000A AC\/DC Current Clamp (TA388)\u003cbr\u003e1 - Fuse Extension Lead for ATC (TA034)\u003cbr\u003e1 - Fuse Extension Lead for Maxi (TA206)\u003cbr\u003e1 - Fuse Extension Lead for Mini (TA035)\u003cbr\u003e1 - Fuse Extension Lead for JCASE (TA168)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e2 - Small crocodile clip (black) (TA003)\u003cbr\u003e2 - Small crocodile clip (red) (TA004)\u003cbr\u003e1 - Dolphin clip 1000V CATlll (black) (TA005)\u003cbr\u003e2 - Multimeter style test probe (black) (TA001)\u003cbr\u003e2 - Multimeter style test probe (red) (TA002)\u003cbr\u003e2 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e2 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e4 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e4 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e4 - 4mm shrouded to unshrouded adaptor red (TA017)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e2 - S Hook (Ml168)\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - USB Cable: 2.0, 4.5 meters (Mi121)\u003cbr\u003e1 - Carry Case : 4425A Standard (PA209)\u003cbr\u003e\u003cem\u003eTransducer\u003c\/em\u003e\u003cbr\u003e2 - WPS600C pressure transducer 60\/600 Bar (TA092)\u003cbr\u003e2 - Cable: insulated BNC to insulated BNC, 5 meters (TA130)\u003cbr\u003e2 - Cable : BNC to BNC 2m (TA082)\u003cbr\u003e2 - USB Cable: A male to mini 5 pin, 2 meters (TA081)\u003cbr\u003e1 - Carry Case : Dual WPS600 small case (PA156)\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e1 - 24-months - Scope module\u003cbr\u003e1 - 12-months - all other items\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003eTo ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667448586553,"sku":"pt-PQ195","price":5556.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/4-Channel_Pico_4425A_Engine_and_Hydraulics_Kit__PQ195__pt-PQ195_1.webp?v=1744226929"},{"product_id":"4-channel-pico-4425a-vehicle-assessor-kit-pq222","title":"4-Channel Pico 4425A Vehicle Assessor Kit (PQ222)","description":"\u003cp\u003e\u003cstrong\u003eContents of the Pico PQ222 Vehicle Assessor Diagnostic Kit \u003c\/strong\u003e\u003cbr\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4425A 4-channel scope module (PR340)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Blue, 4mm permanent ground (TA404)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Red, 4mm permanent ground (TA405)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Green, 4mm permanent ground (TA406)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Yellow, 4mm permanent ground (TA407)\u003cbr\u003e1 - PicoBNC+ 10:1 scope probe (TA499)\u003cbr\u003e\u003cem\u003eIgnition\u003c\/em\u003e\u003cbr\u003e2 - PicoBNC+ secondary ignition pickup (TA397)\u003cbr\u003e\u003cem\u003eCurrent \u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 200A\/2000A AC\/DC Current Clamp (TA388)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e2 - Small crocodile clip (black) (TA003)\u003cbr\u003e2 - Small crocodile clip (red) (TA004)\u003cbr\u003e1 - Multimeter style test probe (black) (TA001)\u003cbr\u003e1 - Multimeter style test probe (red) (TA002)\u003cbr\u003e1 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e2 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e2 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e2 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e1 - S Hook (Ml168)\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - Carry Case: 4425A Assessory Case (PA211)\u003cbr\u003e\u003cem\u003eTransducer\u003c\/em\u003e\u003cbr\u003e1 - WPS500X pressure transducer (TA071)\u003cbr\u003e1 - Cable: insulated BNC to insulated BNC, 5 meters (TA130)\u003cbr\u003e1 - Exhaust adaptor for WPS500 pressure transducer (TA087)\u003cbr\u003e1 - Vacuum hose for WPS500 pressure transducer (TA085)\u003cbr\u003e1 - Large hose adaptor (Firstlook) (TA166)\u003cbr\u003e1 - USB Cable: A male to mini 5 pin, 2 meters (TA081)\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e1 - 24-months - Scope module\u003cbr\u003e1 - 12-months - all other items\u003cbr\u003e\u003cbr\u003ePlease note, the transducer \u003ca href=\"https:\/\/aeswave-store.myshopify.com\/products\/universal-compression-hose-high-strength\"\u003ecompression hose and spark plug adapters are sold separatetly!\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003eTo ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667448619321,"sku":"pt-PQ222","price":3541.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/4-Channel_Pico_4425A_Vehicle_Assessor_Kit__PQ222__pt-PQ222_1.webp?v=1744226933"},{"product_id":"4-channel-pico-4425a-ev-kit-pq196","title":"4-Channel Pico 4425A EV Kit (PQ196)","description":"\u003cp\u003e(AES# pt-PQ196)\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe PQ196 PicoScope 4425A Electric Vehicle (EV) kit includes special accessories and a new set of Guided Tests to provide comprehensive diagnostics capability for all types of EV (BEV, MHEV, PHEV, Fuel-cell), and ICE (Diesel, Gasoline, LPG) systems, including insulation and safety testing.\u003c\/p\u003e\u003cp\u003eThe wide range of EV systems covered includes:\u003cbr\u003e\u003cstrong\u003e48V Mild Hybrids \u003c\/strong\u003e- Starting and Charging systems both 48V and 12V, Cell measuring on 48V Battery, DC-DC Charging, Standard ICE testing \u003cbr\u003e\u003cstrong\u003eFull \u0026amp; Plugin Hybrid \u003c\/strong\u003e- Insulation component testing, 3 phase current testing where possible, MG position sensor testing, DC-DC Charging, CP and PP charging confirmation, Standard ICE testing, Safe shut down and start up sequence, Power output measurements with current and voltage\u003cbr\u003e\u003cstrong\u003eBEV \u003c\/strong\u003e- Safe shut down and start up sequence, Insulation component testing, MG position sensor testing, DC-DC Charging, 3 phase current testing where possible, CP and PP charging verification, Power output measurements with current and voltage\u003cbr\u003e\u003cstrong\u003eFuel Cell Vehicles\u003c\/strong\u003e -\u003cstrong\u003e\u003c\/strong\u003eSafe shut down and start up, Insulation component testing, MG position sensor testing, DC-DC Charging, 3 phase testing where possible, Main air pump testing, Power output measurements with current and voltage \u003c\/p\u003e\u003cp\u003ePicoScope 7 Automotive software includes Guided tests for EV:\u003cbr\u003e - Charger-vehicle proximity line resistance (type 1)\u003cbr\u003e - Charger-vehicle proximity line resistance (type 2)\u003cbr\u003e - Toyota Prius system main relay operation\u003cbr\u003e - Motor resolver\u003cbr\u003e - 0 V potential testing\u003cbr\u003e - Charging current split between low and high voltage batteries\u003cbr\u003e - High voltage DC - low voltage DC charging,\u003cbr\u003e - Charger-vehicle communications (type 1)\u003cbr\u003e - Charger-vehicle communications (type 2)\u003cbr\u003e -  Insulation testing\u003cbr\u003e In addition to the EV tests listed above, the kit includes full access to the Pico Waveform Library.\u003c\/p\u003e\u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"320\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/850UroANtds?rel=0\u0026amp;showinfo=0\u0026amp;ecver=2%22style=%22position:absolute;width:100%25;height:100%25;left:0\" width=\"599\"\u003e\u003c\/iframe\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eNot just for EV! \u003c\/strong\u003e\u003cbr\u003e The kit includes Pico's extensive range of accessories for testing engines\/motors, sensors, actuators, communications buses, etc... Add-ons available for Noise Vibration \u0026amp; Harshness, In-cylinder testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eContents of the Pico PQ196 Electric Vehicles (EV) Diagnostic Kit \u003c\/strong\u003e\u003cbr\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e 1 - Pico 4425A 4-channel scope module (PR340)\u003cbr\u003e\u003cem\u003eEV\u003c\/em\u003e\u003cbr\u003e 1 - Active HV Differential Probe: x20\/x200 25MHz 1400V CATIII (TA057)\u003cbr\u003e 3 - 1000V back pinning probe (black) (TA558)\u003cbr\u003e 3 - 1000V back pinning probe (red) (TA559)\u003cbr\u003e 1 - 2-pole tester (TA466)\u003cbr\u003e 1 - Insulation tester (TA467) with PC Link\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e 1 - PicoBNC+ 3-meter Test Lead: Blue, 4mm permanent ground (TA404)\u003cbr\u003e 1 - PicoBNC+ 3-meter Test Lead: Red, 4mm permanent ground (TA405)\u003cbr\u003e 1 - PicoBNC+ 3-meter Test Lead: Green, 4mm permanent ground (TA406)\u003cbr\u003e 1 - PicoBNC+ 3-meter Test Lead: Yellow, 4mm permanent ground (TA407)\u003cbr\u003e 2 - PicoBNC+ 10:1 scope probe (TA499)\u003cbr\u003e 1 - PicoBNC+ resistance test lead (TA432)\u003cbr\u003e 1 - PicoBNC+ Temperature probe (wide-range linear) (TA395)\u003cbr\u003e 1 - Ultrasonic Parking Sensor Detector (TA329)\u003cbr\u003e 1 - Keyless Entry Detector (TA330)\u003cbr\u003e\u003cem\u003eIgnition\u003c\/em\u003e\u003cbr\u003e 1 - PicoBNC+ COP probe (TA398)\u003cbr\u003e\u003cem\u003eCurrent \u003c\/em\u003e\u003cbr\u003e 1 - PicoBNC+ 60A AC\/DC Current Clamp (TA473)\u003cbr\u003e 3 - PicoBNC+ 200A\/2000A AC\/DC Current Clamp  (TA388)\u003cbr\u003e 1 - Fuse Extension Lead for ATC (TA034)\u003cbr\u003e 1 - Fuse Extension Lead for Maxi (TA206)\u003cbr\u003e 1 - Fuse Extension Lead for Mini (TA035)\u003cbr\u003e 1 - Fuse Extension Lead for JCASE (TA168)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e 1 - Multimeter style test probe (black) (TA001)\u003cbr\u003e 1 - Multimeter style test probe (red) (TA002)\u003cbr\u003e 2 - Small crocodile clip (black) (TA003)\u003cbr\u003e 2 - Small crocodile clip (red) (TA004)\u003cbr\u003e 1 - Dolphin clip 1000V CATlll (black) (TA005)\u003cbr\u003e 1 - Dolphin clip  1000V CATlll (red) (TA006)\u003cbr\u003e 2 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e 2 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e 4 - 4mm shrouded to unshrouded adaptor red (TA017)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e 2 - S Hook (Ml168)\u003cbr\u003e 1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e 1 - USB Cable: 2.0, 4.5 meters (Mi121)\u003cbr\u003e 2 -  Telescopic pack (PA038)\u003cbr\u003e 1 - Carry Case: 4425a Standard EV Case (PA209)\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e 1 - 24-months - Scope module\u003cbr\u003e 1 - 12-months - all other items\u003c\/p\u003e\u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"320\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/zmw5R1GAL8k?rel=0\u0026amp;showinfo=0\u0026amp;ecver=2%22style=%22position:absolute;width:100%25;height:100%25;left:0\" width=\"599\"\u003e\u003c\/iframe\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003e To ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor. \u003c\/div\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667480338745,"sku":"pt-PQ196","price":5727.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/4-Channel_Pico_4425A_EV_Kit__PQ196__pt-PQ196_1.webp?v=1744227486"},{"product_id":"nvh-essentials-starter-kit-with-pico-4425a-pq266","title":"NVH Essentials STARTER Kit with Pico 4425A (PQ266)","description":"\u003cp\u003eThe PicoScope 4425A NVH Essentials STARTER Kit (PQ266) combines the contents of two kits:\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/PicoScope-4-Channel-4425A-Automotive-Oscilloscope-PQ174-p9832.html\"\u003ePicoScope 4-Channel Scope 4425A (PQ174)\u003c\/a\u003e\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/NVH-Diagnostic-STARTER-Kit-in-Carry-Case-p9624.html\"\u003eNVH Diagnostic STARTER Kit (PQ126)\u003c\/a\u003e (excluding the small case)\u003cbr\u003eThe kit also includes a sturdy storage case for all the items.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667496362297,"sku":"PT-PQ266","price":2173.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/24086.jpg?v=1689078036"},{"product_id":"nvh-essentials-starter-kit-with-pico-4425a-and-opto-pq267","title":"NVH Essentials STARTER Kit with Pico 4425A and Opto (PQ267)","description":"\u003cp\u003e(AES# pt-PQ267)\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe PicoScope 4425A NVH Essentials STARTER Kit with Opto (PQ267) combines the contents of three kits:\u003cbr\u003e - \u003ca href=\"https:\/\/www.aeswave.com\/PicoScope-4-Channel-4425A-Automotive-Oscilloscope-PQ174-p9832.html\"\u003ePicoScope 4-Channel Scope 4425A (PQ174)\u003c\/a\u003e\u003cbr\u003e - \u003ca href=\"https:\/\/www.aeswave.com\/NVH-Diagnostic-STARTER-Kit-in-Carry-Case-p9624.html\"\u003eNVH Diagnostic STARTER Kit (PQ126)\u003c\/a\u003e (excluding the small case)\u003cbr\u003e - \u003ca href=\"http:\/\/www.aeswave.com\/Optical-Sensor-Kit-for-the-Pico-NVH-Diagnostic-Kits-p9486.html\"\u003eOptical Sensor Kit (PP991)\u003c\/a\u003e\u003cbr\u003e The kit also includes a sturdy storage case for all the items.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667497083193,"sku":"pt-PQ267","price":3109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/24089.jpg?v=1689078037"},{"product_id":"nvh-essentials-standard-kit-with-pico-4425a-pq268","title":"NVH Essentials STANDARD Kit with Pico 4425A (PQ268)","description":"\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eCurrently backordered, ships out once available.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe PicoScope 4425A NVH Essentials STANDARD Kit (PQ268) combines the contents of two kits:\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/PicoScope-4-Channel-4425A-Automotive-Oscilloscope-PQ174-p9832.html\"\u003ePicoScope 4-Channel Scope 4425A (PQ174)\u003c\/a\u003e\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/NVH-Diagnostic-STANDARD-Kit-in-Carry-Case-p9623.html\"\u003eNVH Diagnostic STANDARD Kit (PQ129) \u003c\/a\u003e (excluding the small case)\u003cbr\u003eThe kit also includes a sturdy storage case for all the items.\u003c\/p\u003e\n\u003cp\u003eThe Pico NVH Essentials Diagnostic STANDARD Kit in Carry Case lets you use a \"4th axis\" to locate the source of a vibration.  For example, get base line readings with the 3-axis accelerometer connected to the seat rail, then move the \"4th axis\" to the left front, RF, LR and RR of the vehicle to determine where the vibration is strongest.  \u003c\/p\u003e\n\u003cp\u003eThe PicoDiagnostics NVH Kit provides you with the hardware and software needed to your use PicoScope for Noise, Vibration and Harshness (NVH) analysis. If your customer can feel it or hear it, you can find it:\u003cbr\u003e• Cabin vibrations at speed\u003cbr\u003e• Engine vibrations throughout the entire rev range\u003cbr\u003e• Clutch judder\/vibration\u003cbr\u003e• Transmission and bearing whine\u003cbr\u003e• Auxiliary drive noise\u003cbr\u003e• Brake judder\u003cbr\u003e• Steering vibrations\u003c\/p\u003e\n\u003cp\u003eConnect Pico's 3-axis accelerometer to the vehicle and use the software to display a real-time bar graph for each type of vibration (T-tire, E-engine, P-Propshaft) in three different planes: Vertical, Lateral, Front\/Back. After you determine the type of vibration and in which plane it occurs, use the Pico NVH Assist to review a list of the most likely causes and then focus your efforts on those systems and components. For example, if a “T” vibration occurs in the “Lateral” plane suspect the tires and related components; if an “E” vibration occurs in the “Vertical” plane don’t balance the tires, suspect the engine mounts.\u003c\/p\u003e\n\u003cp\u003eAnalysis files can be recorded for playback, saved for future reference, and printed to help explain the diagnosis and repair to your customer.\u003c\/p\u003e\n\u003cp\u003eSpeed and RPM measurements can be added to the analysis, additional hardware required and sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequirements to run Pico NVH\u003c\/strong\u003e\u003cbr\u003eThe NVH interface unit connects to your Automotive PicoScope (included) via a BNC cable and uses the free PicoDiagnostics NVH software.\u003c\/p\u003e\n\u003cp\u003eRequired software: Windows XP, Vista, 7, 8, 10 (not Windows RT), 11 to run the free PicoDiagnostics NVH software.\u003c\/p\u003e\n\u003cp\u003eOptional hardware for live RPM readings:\u003cbr\u003e- J2534 Scan Tool or VCI (not included) or Elm327.\u003cbr\u003e- Synch probe such as the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.aeswave.com\/Trigger-Pickup-Inductive-Lead-for-the-PicoScope-p8796.html\"\u003eInductive Pickup Probe\u003c\/a\u003e.\u003cbr\u003eThe software also lets you enter a static RPM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e• Kit includes two 3-axis accelerometers and 2 microphones\u003cbr\u003e• Software provides full screen, high-resolution results and analysis, sharing and attaching to customer records\u003cbr\u003e• Displays data as bar graph, frequency chart, 3D frequency chart, Road Speed chart, RPM Order chart.\u003cbr\u003e• Record up to 500 seconds of data to laptop or PC. No external memory required.\u003cbr\u003e• For quick diagnosis use the simple bar charts.\u003cbr\u003e• For full analysis, use the advanced features such as waterfall and spectral displays\u003cbr\u003e• Detects multiple vehicle vibrations\u003cbr\u003e• Take it on road tests and record the results for playback in the shop\u003cbr\u003e• Use for dynamic driveline balancing: Direct support for pinion flange, single weight, and hose clamp methods; Step-by-step procedures with help and graphical displays\u003cbr\u003e• Use a J2534-compliant interface to acquire engine speed data, or signal input – particularly useful for older or non-compliant vehicles.\u003cbr\u003e• Import WAV audio files (vehicle noise recorded by a customer)\u003cbr\u003e• Report function to help you explain the diagnosis and repair to the customer\u003cbr\u003e• Free software updates\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Pico 4-axis NVH Diagnostic Kit contains the following items:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e1 - \u003cspan\u003ePico 4425A 4-channel scope module\u003c\/span\u003e\u003cbr\u003e2 - MEMS Accelerometer (TA143)\u003cbr\u003e2 - Mounting magnet for accelerometer (TA096)\u003cbr\u003e2 - Microphone (TA144)\u003cbr\u003e1 - Cable: NVH to Scope module, 0.5m Blue (TA243)\u003cbr\u003e1 - Cable: NVH to Scope module, 0.5m Red (TA244)\u003cbr\u003e1 - Cable: NVH to Scope module, 0.5m Green (TA245)\u003cbr\u003e1 - Cable: NVH to Scope module, 0.5m Yellow (TA260)\u003cbr\u003e4 - Extension cable (3 meters) (TA145)\u003cbr\u003e1 - Software: NVH license for one PicoScope module, not transferable \u003cbr\u003e1 - \u003cspan\u003eUSB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - Case \u003cbr\u003e1 - Year warranty\u003c\/span\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667497148729,"sku":"pt-PQ268","price":3085.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/24098.jpg?v=1689078039"},{"product_id":"nvh-essentials-standard-kit-with-pico-4425a-and-opto-pq269","title":"NVH Essentials STANDARD Kit with Pico 4425A and Opto (PQ269)","description":"\u003cp\u003eThe PicoScope 4425A NVH Essentials STANDARD Kit with Opto (PQ269) combines the contents of three kits:\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/PicoScope-4-Channel-4425A-Automotive-Oscilloscope-PQ174-p9832.html\"\u003ePicoScope 4-Channel Scope 4425A (PQ174)\u003c\/a\u003e\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/NVH-Diagnostic-STANDARD-Kit-in-Carry-Case-p9623.html\"\u003eNVH Diagnostic STANDARD Kit (PQ129)\u003c\/a\u003e (excluding the small case)\u003cbr\u003e- \u003ca href=\"http:\/\/www.aeswave.com\/Optical-Sensor-Kit-for-the-Pico-NVH-Diagnostic-Kits-p9486.html\"\u003eOptical Sensor Kit (PP991)\u003c\/a\u003e\u003cbr\u003eThe kit also includes a sturdy storage case for all the items.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667497214265,"sku":"pt-PQ269","price":3582.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/24092.jpg?v=1689078046"},{"product_id":"nvh-essentials-advanced-kit-with-pico-4425a-pq270","title":"NVH Essentials ADVANCED Kit with Pico 4425A (PQ270)","description":"\u003cp\u003e(AES# pt-PQ270)\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe PicoScope 4425A NVH Essentials ADVANCED Kit (PQ270) combines the contents of two kits:\u003cbr\u003e - \u003ca href=\"https:\/\/www.aeswave.com\/PicoScope-4-Channel-4425A-Automotive-Oscilloscope-PQ174-p9832.html\"\u003ePicoScope 4-Channel Scope 4425A (PQ174)\u003c\/a\u003e\u003cbr\u003e - \u003ca href=\"https:\/\/www.aeswave.com\/NVH-Diagnostic-ADVANCED-Kit-in-Carry-Case-p9628.html\"\u003eNVH Diagnostic ADVANCED Kit (PQ120)\u003c\/a\u003e (excluding the small case)\u003cbr\u003e The kit also includes a sturdy storage case for all the items.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667497574713,"sku":"pt-PQ270","price":4324.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/24101.jpg?v=1689078048"},{"product_id":"nvh-essentials-advanced-kit-with-pico-4425a-and-opto-pq271","title":"NVH Essentials ADVANCED Kit with Pico 4425A and Opto (PQ271)","description":"\u003cp\u003e(AES# pt-PQ271)\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe PicoScope 4425A NVH Essentials ADVANCED Kit with Opto (PQ271) combines the contents of three kits:\u003cbr\u003e - \u003ca href=\"https:\/\/www.aeswave.com\/PicoScope-4-Channel-4425A-Automotive-Oscilloscope-PQ174-p9832.html\"\u003ePicoScope 4-Channel Scope 4425A (PQ174)\u003c\/a\u003e\u003cbr\u003e - \u003ca href=\"https:\/\/www.aeswave.com\/NVH-Diagnostic-ADVANCED-Kit-in-Carry-Case-p9628.html\"\u003eNVH Diagnostic ADVANCED Kit (PQ120)\u003c\/a\u003e (excluding the small case)\u003cbr\u003e - \u003ca href=\"http:\/\/www.aeswave.com\/Optical-Sensor-Kit-for-the-Pico-NVH-Diagnostic-Kits-p9486.html\"\u003eOptical Sensor Kit (PP991)\u003c\/a\u003e\u003cbr\u003e The kit also includes a sturdy storage case for all the items.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667497640249,"sku":"pt-PQ271","price":4821.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/24104.jpg?v=1689078049"},{"product_id":"pico-2-channel-4225a-standard-diagnostic-kit-in-foam-pq225","title":"Pico 2-channel 4225A STANDARD Diagnostic Kit in Foam (PQ225)","description":"\u003cp\u003e(AES# pt-PQ177-F) Pico PQ225\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Pico PQ225 Diagnostic Kit in Foam combines Pico's 4225A STANDARD Diagnostic Kit (PQ177) (without the case) with 2 foam trays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003cbr\u003e- \u003ca href=\"https:\/\/aeswave-store.myshopify.com\/products\/2-channel-pico-4225a-standard-diagnostic-kit-pq177\"\u003ePico 2-Channel 4225A STANDARD Diagnostic Kit \u003c\/a\u003e(PQ177) (without the case)\u003cbr\u003e- \u003ca href=\"https:\/\/aeswave-store.myshopify.com\/products\/foam-tray-organizer-for-bnc-or-bnc-scope\"\u003eFoam Tray Organizer for BNC+ or BNC SCOPE\u003c\/a\u003e (PA192)\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667498000697,"sku":"pt-PQ225","price":2549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Pico_2-channel_4225A_STANDARD_Diagnostic_Kit_in_Foam__PQ225__pt-PQ225_1.webp?v=1744227638"},{"product_id":"pico-2-channel-4225a-standard-diagnostic-kit-with-case-and-foam-pq278","title":"Pico 2-channel 4225A STANDARD Diagnostic Kit with Case and Foam (PQ278)","description":"\u003cp\u003e(AES# pt-PQ177-FC) Pico PQ278\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Pico PQ278 Diagnostic Kit with Case and Foam combines Pico's 4225A STARTER Diagnostic Kit (PQ177) (with the case) and with 1 foam tray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/2-Channel-Pico-4225A-STANDARD-Diagnostic-Kit-PQ177-p9835.html\"\u003ePico 2-Channel 4425A STARTER Diagnostic Kit\u003c\/a\u003e (PQ177) (with the case)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-4X25-or-4X25A-BNC-Scope-plus-60A-clamp-p9961.html\"\u003eFoam Tray Organizer for 4X25 or 4X25A BNC+ Scope plus 60A clamp\u003c\/a\u003e (PA230)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667498295609,"sku":"pt-PQ278","price":2682.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Pico_2-channel_4225A_STANDARD_Diagnostic_Kit_with_Case_and_Foam__PQ278__pt-PQ278_1.webp?v=1744227642"},{"product_id":"pico-4-channel-4425a-standard-diagnostic-kit-in-foam-pq226","title":"Pico 4-Channel 4425A STANDARD Diagnostic Kit in Foam (PQ226)","description":"\u003cp\u003e\u003ciframe width=\"599\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/850UroANtds?rel=0\u0026amp;showinfo=0\u0026amp;ecver=2%22style=%22position:absolute;width:100%25;height:100%25;left:0\" height=\"320\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eThe Pico PQ178 STANDARD Diagnostic Kit includes the 4425A Picoscope module, PicoBNC+™ test probes, and accessories in a sturdy carrying case. The 4425A uses PicoScope Automotive software which is updated continuously with no subscription costs or in-app purchases. It's easy for students and novices to use, and powerful enough for Master Technicians, trainers, and instructors.\u003c\/p\u003e\n\u003cp\u003eThe 4425A generation of Picoscope utilizes PicoBNC+™ that provides smart probe interfacing, powered probes, and status lights on each channel, as well as full compatibility with your existing PicoScope or third-party BNC probes. Image below shows probes with PicoBNC+™ and traditional BNC connected to the 4425A.\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 500px; height: 125px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22258.png?v=1689077578?1586974906\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe unique capabilities and characteristics of the PicoBNC+™ include:\u003cbr\u003e• Push to connect, does not require a twist like old-fashioned BNC connectors. \u003cbr\u003e• Identifies the probe to PicoScope software which will auto-configure for that specific probe.\u003cbr\u003e• Provides power from the scope module to the probe, great for overnight battery drain tests! \u003cbr\u003e• Will Auto-zero current clamps and other probes.\u003cbr\u003e• Includes bright status lights for each channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope 4425A Hardware\u003c\/strong\u003e\u003cbr\u003eThe PicoScope 4425A scope module includes the features that make PicoScope hardware the most powerful and versatile automotive scope:\u003cbr\u003e• ±200 V to ±50 mV input ranges with floating inputs\u003cbr\u003e• Up to 400 M samples\/second (Fast enough for FlexRay, CAN FD etc.)\u003cbr\u003e• 512MB Deep Memory inside the scope (Capture intermittent faults that other scopes miss)\u003cbr\u003e• ConnectDetect® for confirmation of good contact\u003cbr\u003e• USB2 or USB3 connectivity to PC\u003cbr\u003e• Hardware frequency coupling\u003cbr\u003e• Hardware \u0026amp; software triggers and filters\u003cbr\u003e• NVH (Noise, Vibration \u0026amp; Harshness) diagnostics\u003cbr\u003e• Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e• Compatible with Pico NVH interfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope Software\u003c\/strong\u003e\u003cbr\u003ePico has continuously upgraded and improved their Windows-based automotive software for over 20 years. Beginning with PicoScope 7, it is optimized for touchscreen\/tablet devices and will become compatible with Linux and macOS. With PicoScope software you can:\u003cbr\u003e• Set up your scope quickly with over 150 guided tests\u003cbr\u003e• Auto-configure PicoBNC+™ probes \u003cbr\u003e• See your waveforms in high definition and with minimal delay.\u003cbr\u003e• Evaluate your waveforms with powerful tools: Math channels, Masks\/Alarms, Serial Decoding, Rotation\/Phase markers (eg 720 degree rotation)\u003cbr\u003e• Save and share your waveforms\u003cbr\u003e• Exclusive access to the Pico Waveform Library with over 5500 entries.\u003cbr\u003e• PicoDiagnostics for NVH, Cylinder compression, battery, alternator and starter testing, cylinder misfires \/ balance\u003cbr\u003e• Get free updates for PicoScope Automotive software with no subscriptions or in-app purchases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents of the Pico PQ178 STANDARD Diagnostic Kit \u003cbr\u003e\u003c\/strong\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4425A 4-channel scope module (PR340)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Blue, 4mm permanent ground (TA404)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Red, 4mm permanent ground (TA405)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Green, 4mm permanent ground (TA406)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Yellow, 4mm permanent ground (TA407)\u003cbr\u003e1 - PicoBNC+ 10:1 scope probe (TA499)\u003cbr\u003e\u003cem\u003eIgnition\u003c\/em\u003e\u003cbr\u003e2 - PicoBNC+ secondary ignition pickup (TA397)\u003cbr\u003e1 - PicoBNC+ COP probe (TA398)\u003cbr\u003e1 - Earth wire for coil pack 45cm long (TA106)\u003cbr\u003e2 - HT extension test lead (TA037)\u003cbr\u003e\u003cem\u003eCurrent \u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 60A AC\/DC Current Clamp (TA473)\u003cbr\u003e1 - PicoBNC+ 200A\/2000A AC\/DC Current Clamp (TA388)\u003cbr\u003e1 - Fuse Extension Lead for ATC (TA034)\u003cbr\u003e1 - Fuse Extension Lead for Mini (TA035)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e2 - Small crocodile clip (black) (TA003)\u003cbr\u003e2 - Small crocodile clip (red) (TA004)\u003cbr\u003e2 - Multimeter style test probe (black) (TA001)\u003cbr\u003e2 - Multimeter style test probe (red) (TA002)\u003cbr\u003e2 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e2 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e4 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e4 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e4 - 4mm shrouded to unshrouded adaptor red (TA017)\u003cbr\u003e1 - Electronics Acupuncture Probes (TA008)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e1 - S Hook (Ml168)\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-or-BNC-SCOPE-p9950.html\"\u003eFoam Tray Organizer for BNC+ or BNC SCOPE\u003c\/a\u003e (PA192)\u003cbr\u003e1 - \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-2000A-60A-COP-p9951.html\"\u003eFoam Tray Organizer for BNC+ 2000A, 60A, COP\u003c\/a\u003e (PA194)\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e1 - 24-months - Scope module\u003cbr\u003e1 - 12-months - all other items\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003eTo ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/YSbI3-CN1fc?si=3REicx93D7CrW-Ed\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/8wzyBbL2rjs?si=kA-k1EYlacC7e9TJ\" height=\"315\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/QUX6G-anwzg?si=INHnMBkrWobhL-2m\" height=\"315\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667498361145,"sku":"pt-PQ226","price":3401.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Pico_4-Channel_4425A_STANDARD_Diagnostic_Kit_in_Foam__PQ226__pt-PQ226_1.webp?v=1744227646"},{"product_id":"pico-4-channel-4425a-standard-diagnostic-kit-with-case-and-foam-pq279","title":"Pico 4-Channel 4425A STANDARD Diagnostic Kit with Case and Foam (PQ279)","description":"\u003cp\u003eThe Pico PQ279 Diagnostic Kit with Case and Foam combines Pico's 4425A STANDARD Diagnostic Kit (PQ178) (with the case) and with 2 foam trays.\u003c\/p\u003e\n\u003cp\u003eThe Pico PQ178 STANDARD Diagnostic Kit includes the 4425A Picoscope module, PicoBNC+™ test probes, and accessories in a sturdy carrying case. The 4425A uses PicoScope Automotive software which is updated continuously with no subscription costs or in-app purchases. It's easy for students and novices to use, and powerful enough for Master Technicians, trainers, and instructors. \u003c\/p\u003e\n\u003cp\u003eThe 4425A generation of Picoscope utilizes PicoBNC+™ that provides smart probe interfacing, powered probes, and status lights on each channel, as well as full compatibility with your existing PicoScope or third-party BNC probes. Image below shows probes with PicoBNC+™ and traditional BNC connected to the 4425A.\u003c\/p\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" src=\"https:\/\/www.aeswave.com\/images\/products\/22258.png?1586974906\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe unique capabilities and characteristics of the PicoBNC+™ include:\u003cbr\u003e• Push to connect, does not require a twist like old-fashioned BNC connectors. \u003cbr\u003e• Identifies the probe to PicoScope software which will auto-configure for that specific probe.\u003cbr\u003e• Provides power from the scope module to the probe, great for overnight battery drain tests! \u003cbr\u003e• Will Auto-zero current clamps and other probes.\u003cbr\u003e• Includes bright status lights for each channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope 4425A Hardware\u003c\/strong\u003e\u003cbr\u003eThe PicoScope 4425A scope module includes the features that make PicoScope hardware the most powerful and versatile automotive scope:\u003cbr\u003e• ±200 V to ±50 mV input ranges with floating inputs\u003cbr\u003e• Up to 400 M samples\/second (Fast enough for FlexRay, CAN FD etc.)\u003cbr\u003e• 512MB Deep Memory inside the scope (Capture intermittent faults that other scopes miss)\u003cbr\u003e• ConnectDetect® for confirmation of good contact\u003cbr\u003e• USB2 or USB3 connectivity to PC\u003cbr\u003e• Hardware frequency coupling\u003cbr\u003e• Hardware \u0026amp; software triggers and filters\u003cbr\u003e• NVH (Noise, Vibration \u0026amp; Harshness) diagnostics\u003cbr\u003e• Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e• Compatible with Pico NVH interfaces. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope Software\u003c\/strong\u003e\u003cbr\u003ePico has continuously upgraded and improved their Windows-based automotive software for over 20 years. Beginning with PicoScope 7, it is optimized for touchscreen\/tablet devices and will become compatible with Linux and macOS. With PicoScope software you can:\u003cbr\u003e• Set up your scope quickly with over 150 guided tests\u003cbr\u003e• Auto-configure PicoBNC+™ probes \u003cbr\u003e• See your waveforms in high definition and with minimal delay.\u003cbr\u003e• Evaluate your waveforms with powerful tools: Math channels, Masks\/Alarms, Serial Decoding, Rotation\/Phase markers (eg 720 degree rotation)\u003cbr\u003e• Save and share your waveforms\u003cbr\u003e• Exclusive access to the Pico Waveform Library with over 5500 entries.\u003cbr\u003e• PicoDiagnostics for NVH, Cylinder compression, battery, alternator and starter testing, cylinder misfires \/ balance\u003cbr\u003e• Get free updates for PicoScope Automotive software with no subscriptions or in-app purchases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents of the Pico PQ178 STANDARD Diagnostic Kit \u003cbr\u003e\u003c\/strong\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4425A 4-channel scope module (PR340)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Blue, 4mm permanent ground (TA404)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Red, 4mm permanent ground (TA405)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Green, 4mm permanent ground (TA406)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Yellow, 4mm permanent ground (TA407)\u003cbr\u003e1 - PicoBNC+ 10:1 scope probe (TA506)\u003cbr\u003e\u003cem\u003eIgnition\u003c\/em\u003e\u003cbr\u003e2 - PicoBNC+ secondary ignition pickup (TA397)\u003cbr\u003e1 - PicoBNC+ COP probe (TA398)\u003cbr\u003e1 - Earth wire for coil pack 45cm long (TA106)\u003cbr\u003e2 - HT extension test lead (TA037)\u003cbr\u003e\u003cem\u003eCurrent \u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 60A AC\/DC Current Clamp (TA473)\u003cbr\u003e1 - PicoBNC+ 200A\/2000A AC\/DC Current Clamp  (TA388)\u003cbr\u003e1 - Fuse Extension Lead for ATC (TA034)\u003cbr\u003e1 - Fuse Extension Lead for Mini (TA035)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e2 - Small crocodile clip (black) (TA003)\u003cbr\u003e2 - Small crocodile clip (red) (TA004)\u003cbr\u003e2 - Multimeter style test probe (black) (TA001)\u003cbr\u003e2 - Multimeter style test probe (red) (TA002)\u003cbr\u003e2 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e2 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e4 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e4 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e4 - 4mm shrouded to unshrouded adaptor red (TA017)\u003cbr\u003e1 - Electronics Acupuncture Probes (TA008)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e1 - S Hook (Ml168)\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e\u003cspan\u003e1 - Carry Case : 4425A Standard (PA209)\u003c\/span\u003e\u003cbr\u003e1 - Foam Tray Organizer for BNC+ or BNC SCOPE (PA192)\u003cbr\u003e1 - Foam Tray Organizer for BNC+ 2000A, 60A, COP (PA194)\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e1 - 24-months - Scope module\u003cbr\u003e1 - 12-months - all other items\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003eTo ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667498459449,"sku":"pt-PQ279","price":3486.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Pico_4-Channel_4425A_STANDARD_Diagnostic_Kit_with_Case_and_Foam__PQ279__pt-PQ279_1.webp?v=1744227650"},{"product_id":"pico-4-channel-4425a-diesel-diagnostic-kit-in-foam-pq227","title":"Pico 4-Channel 4425A DIESEL Diagnostic Kit in Foam (PQ227)","description":"\u003cp\u003e(AES# pt-PQ179-F) Pico PQ227\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Pico PQ227 Diagnostic Kit in Foam combines Pico's 4425A DIESELDiagnostic Kit (PQ179) (without the case) with 2 foam trays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/4-Channel-Pico-4425A-DIESEL-Diagnostic-Kit-PQ179-p9837.html\"\u003ePico 4-Channel 4425A DIESELDiagnostic Kit\u003c\/a\u003e (PQ179) (without the case)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-or-BNC-SCOPE-p9950.html\"\u003eFoam Tray Organizer for BNC+ or BNC SCOPE\u003c\/a\u003e (PA192)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-2000A-60A-COP-p9951.html\"\u003eFoam Tray Organizer for BNC+ 2000A, 60A, COP\u003c\/a\u003e (PA194)\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667498524985,"sku":"pt-PQ227","price":3325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Pico_4-Channel_4425A_DIESEL_Diagnostic_Kit_in_Foam__PQ227__pt-PQ227_1.webp?v=1744227654"},{"product_id":"pico-4-channel-4425a-diesel-diagnostic-kit-with-case-and-foam-pq280","title":"Pico 4-Channel 4425A DIESEL Diagnostic Kit with Case and Foam (PQ280)","description":"\u003cp\u003eThe \u003cstrong\u003ePico PQ179 DIESEL Diagnostic Kit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis optimized for use on diesel powertrains. It includes the 4425A Picoscope module, PicoBNC+™ test probes (4 with extra long cables), fuse extensions (ATC, JCASE, Maxi, Mini), and accessories in a sturdy carrying case. Ignition probes are not included. The 4425A uses PicoScope Automotive software which is updated continuously with no subscription costs or in-app purchases. It's easy for students and novices to use, and powerful enough for Master Technicians, trainers, and instructors.    \u003c\/p\u003e\n\u003cp\u003eThe 4425A generation of Picoscope utilizes PicoBNC+™ that provides smart probe interfacing, powered probes, and status lights on each channel, as well as full compatibility with your existing PicoScope or third-party BNC probes. Image below shows probes with PicoBNC+™ and traditional BNC connected to the 4425A.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.aeswave.com\/images\/products\/22258.png?1586974906\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe unique capabilities and characteristics of the PicoBNC+™ include:\u003cbr\u003e• Push to connect, does not require a twist like old-fashioned BNC connectors. \u003cbr\u003e• Identifies the probe to PicoScope software which will auto-configure for that specific probe.\u003cbr\u003e• Provides power from the scope module to the probe, great for overnight battery drain tests! \u003cbr\u003e• Will Auto-zero current clamps and other probes.\u003cbr\u003e• Includes bright status lights for each channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope 4425A Hardware\u003c\/strong\u003e\u003cbr\u003eThe PicoScope 4425A scope module includes the features that make PicoScope hardware the most powerful and versatile automotive scope:\u003cbr\u003e• ±200 V to ±50 mV input ranges with floating inputs\u003cbr\u003e• Up to 400 M samples\/second (Fast enough for FlexRay, CAN FD etc.)\u003cbr\u003e• 512MB Deep Memory inside the scope (Capture intermittent faults that other scopes miss)\u003cbr\u003e• ConnectDetect® for confirmation of good contact\u003cbr\u003e• USB2 or USB3 connectivity to PC\u003cbr\u003e• Hardware frequency coupling\u003cbr\u003e• Hardware \u0026amp; software triggers and filters\u003cbr\u003e• NVH (Noise, Vibration \u0026amp; Harshness) diagnostics\u003cbr\u003e• Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e• Compatible with Pico NVH interfaces. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope Software\u003c\/strong\u003e\u003cbr\u003ePico has continuously upgraded and improved their Windows-based automotive software for over 20 years. Beginning with PicoScope 7, it is optimized for touchscreen\/tablet devices and will become compatible with Linux and macOS. With PicoScope software you can:\u003cbr\u003e• Set up your scope quickly with over 150 guided tests\u003cbr\u003e• Auto-configure PicoBNC+™ probes \u003cbr\u003e• See your waveforms in high definition and with minimal delay.\u003cbr\u003e• Evaluate your waveforms with powerful tools: Math channels, Masks\/Alarms, Serial Decoding, Rotation\/Phase markers (eg 720 degree rotation)\u003cbr\u003e• Save and share your waveforms\u003cbr\u003e• Exclusive access to the Pico Waveform Library with over 5500 entries.\u003cbr\u003e• PicoDiagnostics for NVH, Cylinder compression, battery, alternator and starter testing, cylinder misfires \/ balance\u003cbr\u003e• Get free updates for PicoScope Automotive software with no subscriptions or in-app purchases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents of the Pico PQ179 DIESEL Diagnostic Kit \u003cbr\u003e\u003cimg alt=\"Contents of the Pico PQ179 DIESEL Diagnostic Kit\" src=\"https:\/\/www.aeswave.com\/images\/products\/22175.png?1586866894\" loading=\"lazy\"\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4425A 4-channel scope module (PR340)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Blue, 4mm permanent ground (TA475)\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Red, 4mm permanent ground (TA476)\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Green, 4mm permanent ground (TA477)\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Yellow, 4mm permanent ground (TA478)\u003cbr\u003e2 - PicoBNC+ 10:1 scope probe (TA506)\u003cbr\u003e1 - Ultrasonic Parking Sensor Detector (TA329)\u003cbr\u003e1 - Keyless Entry Detector (TA330)\u003cbr\u003e1 - 2-pin breakout lead (TA012)\u003cbr\u003e1 - Breakout Lead 2 pin ACS (TA190)\u003cbr\u003e1 - Breakout Lead 3 pin Kostal (TA191)\u003cbr\u003e\u003cem\u003eCurrent \u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 60A AC\/DC Current Clamp (TA473)\u003cbr\u003e1 - PicoBNC+ 200A\/2000A AC\/DC Current Clamp  (TA388)\u003cbr\u003e1 - Fuse Extension Lead for ATC (TA034)\u003cbr\u003e1 - Fuse Extension Lead for Maxi (TA206)\u003cbr\u003e1 - Fuse Extension Lead for Mini (TA035)\u003cbr\u003e1 - Fuse Extension Lead for JCASE (TA168)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e2 - Small crocodile clip (black) (TA003)\u003cbr\u003e2 - Small crocodile clip (red) (TA004)\u003cbr\u003e2 - Multimeter style test probe (black) (TA001)\u003cbr\u003e2 - Multimeter style test probe (red) (TA002)\u003cbr\u003e2 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e2 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e4 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e4 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e4 - 4mm shrouded to unshrouded adaptor red (TA017)\u003cbr\u003e1 - Electronics Acupuncture Probes (TA008)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e2 - S Hook (Ml168)\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - USB Cable: 2.0, 4.5 meters (Mi121)\u003cbr\u003e1 - Carry Case : 4425A Standard (PA209)\u003cbr\u003e1 - \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-2000A-60A-COP-p9951.html\"\u003eFoam Tray Organizer for BNC+ 2000A, 60A, COP\u003c\/a\u003e\u003cbr\u003e1 - \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-2000A-60A-COP-p9951.html\"\u003eFoam Tray Organizer for BNC+ 2000A, 60A, COP\u003c\/a\u003e \u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e\u003cspan\u003e1 - 24-months - Scope module\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 - 12-months - all other items\u003c\/span\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667499016505,"sku":"pt-PQ280","price":3457.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Pico_4-Channel_4425A_DIESEL_Diagnostic_Kit_with_Case_and_Foam__PQ280__pt-PQ280_1.webp?v=1744227658"},{"product_id":"pico-4-channel-4425a-advanced-diagnostic-kit-in-foam-pq228","title":"Pico 4-Channel 4425A ADVANCED Diagnostic Kit in Foam (PQ228)","description":"\u003cp\u003eThe Pico PQ228 Diagnostic Kit in Foam combines Pico's 4425A ADVANCED Diagnostic Kit (PQ180) (without the case) with 2 foam trays.\u003c\/p\u003e\n\u003cp\u003eThe Pico PQ180 ADVANCED Diagnostic Kit includes the 4425A Picoscope module, PicoBNC+™ test probes, fuse extensions (ATC, JCASE, Maxi, Mini), 6-way Breakout Lead Set and many other accessories in a sturdy carrying case. The 4425A uses PicoScope Automotive software which is updated continuously with no subscription costs or in-app purchases. It's easy for students and novices to use, and powerful enough for Master Technicians, trainers, and instructors.   \u003c\/p\u003e\n\u003cp\u003eThe 4425A generation of Picoscope utilizes PicoBNC+™ that provides smart probe interfacing, powered probes, and status lights on each channel, as well as full compatibility with your existing PicoScope or third-party BNC probes. Image below shows probes with PicoBNC+™ and traditional BNC connected to the 4425A.\u003c\/p\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" src=\"https:\/\/www.aeswave.com\/images\/products\/22258.png?1586974906\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe unique capabilities and characteristics of the PicoBNC+™ include:\u003cbr\u003e• Push to connect, does not require a twist like old-fashioned BNC connectors. \u003cbr\u003e• Identifies the probe to PicoScope software which will auto-configure for that specific probe.\u003cbr\u003e• Provides power from the scope module to the probe, great for overnight battery drain tests! \u003cbr\u003e• Will Auto-zero current clamps and other probes.\u003cbr\u003e• Includes bright status lights for each channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope 4425A Hardware\u003c\/strong\u003e\u003cbr\u003eThe PicoScope 4425A scope module includes the features that make PicoScope hardware the most powerful and versatile automotive scope:\u003cbr\u003e• ±200 V to ±50 mV input ranges with floating inputs\u003cbr\u003e• Up to 400 M samples\/second (Fast enough for FlexRay, CAN FD etc.)\u003cbr\u003e• 512MB Deep Memory inside the scope (Capture intermittent faults that other scopes miss)\u003cbr\u003e• ConnectDetect® for confirmation of good contact\u003cbr\u003e• USB2 or USB3 connectivity to PC\u003cbr\u003e• Hardware frequency coupling\u003cbr\u003e• Hardware \u0026amp; software triggers and filters\u003cbr\u003e• NVH (Noise, Vibration \u0026amp; Harshness) diagnostics\u003cbr\u003e• Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e• Compatible with Pico NVH interfaces. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope Software\u003c\/strong\u003e\u003cbr\u003ePico has continuously upgraded and improved their Windows-based automotive software for over 20 years. Beginning with PicoScope 7, it is optimized for touchscreen\/tablet devices and will become compatible with Linux and macOS. With PicoScope software you can:\u003cbr\u003e• Set up your scope quickly with over 150 guided tests\u003cbr\u003e• Auto-configure PicoBNC+™ probes \u003cbr\u003e• See your waveforms in high definition and with minimal delay.\u003cbr\u003e• Evaluate your waveforms with powerful tools: Math channels, Masks\/Alarms, Serial Decoding, Rotation\/Phase markers (eg 720 degree rotation)\u003cbr\u003e• Save and share your waveforms\u003cbr\u003e• Exclusive access to the Pico Waveform Library with over 5500 entries.\u003cbr\u003e• PicoDiagnostics for NVH, Cylinder compression, battery, alternator and starter testing, cylinder misfires \/ balance\u003cbr\u003e• Get free updates for PicoScope Automotive software with no subscriptions or in-app purchases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents of the Pico PQ180 ADVANCED Diagnostic Kit \u003c\/strong\u003e\u003cbr\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4425A 4-channel scope module (PR340)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Blue, 4mm permanent ground (TA404)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Red, 4mm permanent ground (TA405)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Green, 4mm permanent ground (TA406)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Yellow, 4mm permanent ground (TA407)\u003cbr\u003e2 - PicoBNC+ 10:1 scope probe (TA506)\u003cbr\u003e1 - PicoBNC+ resistance test lead (TA432 \/ MI487)\u003cbr\u003e1 - PicoBNC+ Temperature probe (wide-range linear) (TA395 \/ MI482)\u003cbr\u003e1 - Ultrasonic Parking Sensor Detector (TA329)\u003cbr\u003e1 - Professional 4-way breakout lead set in rollup bag (TA514)\u003cbr\u003e1 - 2-pin breakout lead (TA012)\u003cbr\u003e1 - Breakout Lead 2 pin ACS (TA190)\u003cbr\u003e\u003cem\u003eIgnition\u003c\/em\u003e\u003cbr\u003e4 - PicoBNC+ secondary ignition pickup (TA397)\u003cbr\u003e1 - PicoBNC+ COP probe (TA398)\u003cbr\u003e1 - Earth wire for coil pack 45cm long (TA106)\u003cbr\u003e4 - HT extension test lead (TA037)\u003cbr\u003e\u003cem\u003eCurrent \u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 60A AC\/DC Current Clamp (TA473)\u003cbr\u003e1 - PicoBNC+ 200A\/2000A AC\/DC Current Clamp  (TA388)\u003cbr\u003e1 - Fuse Extension Lead for ATC (TA034)\u003cbr\u003e1 - Fuse Extension Lead for Maxi (TA206)\u003cbr\u003e1 - Fuse Extension Lead for Mini (TA035)\u003cbr\u003e1 - Fuse Extension Lead for JCASE (TA168)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e2 - Small crocodile clip (black) (TA003)\u003cbr\u003e2 - Small crocodile clip (red) (TA004)\u003cbr\u003e1 - Dolphin clip 1000V CATlll (black) (TA005)\u003cbr\u003e1 - Dolphin clip  1000V CATlll (red) (TA006)\u003cbr\u003e2 - Multimeter style test probe (black) (TA001)\u003cbr\u003e2 - Multimeter style test probe (red) (TA002)\u003cbr\u003e2 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e2 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e4 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e4 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e4 - 4mm shrouded to unshrouded adaptor red (TA017)\u003cbr\u003e1 - Electronics Acupuncture Probes (TA008)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e2 - S Hook (Ml168)\u003cbr\u003e1 - 6 pocket roll up pouch in black (PA147)\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - USB Cable: 2.0, 4.5 meters (Mi121)\u003cbr\u003e1 - \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-or-BNC-SCOPE-p9950.html\"\u003eFoam Tray Organizer for BNC+ or BNC SCOPE\u003c\/a\u003e (PA192)\u003cbr\u003e1 - \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-2000A-60A-COP-p9951.html\"\u003eFoam Tray Organizer for BNC+ 2000A, 60A, COP\u003c\/a\u003e (PA194)\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e1 - 24-months - Scope module\u003cbr\u003e1 - 12-months - all other items\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003eTo ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667499475257,"sku":"pt-PQ228","price":4584.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Pico_4-Channel_4425A_ADVANCED_Diagnostic_Kit_in_Foam__PQ228__pt-PQ228_1.webp?v=1744227662"},{"product_id":"pico-4-channel-4425a-advanced-diagnostic-kit-with-case-and-foam-pq281","title":"Pico 4-Channel 4425A ADVANCED Diagnostic Kit with Case and Foam (PQ281)","description":"\u003cp\u003eThe Pico PQ180 ADVANCED Diagnostic Kit includes the 4425A Picoscope module, PicoBNC+™ test probes, fuse extensions (ATC, JCASE, Maxi, Mini), 6-way Breakout Lead Set and many other accessories in a sturdy carrying case. The 4425A uses PicoScope Automotive software which is updated continuously with no subscription costs or in-app purchases. It's easy for students and novices to use, and powerful enough for Master Technicians, trainers, and instructors.   \u003c\/p\u003e\n\u003cp\u003eThe 4425A generation of Picoscope utilizes PicoBNC+™ that provides smart probe interfacing, powered probes, and status lights on each channel, as well as full compatibility with your existing PicoScope or third-party BNC probes. Image below shows probes with PicoBNC+™ and traditional BNC connected to the 4425A.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.aeswave.com\/images\/products\/22258.png?1586974906\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe unique capabilities and characteristics of the PicoBNC+™ include:\u003cbr\u003e• Push to connect, does not require a twist like old-fashioned BNC connectors. \u003cbr\u003e• Identifies the probe to PicoScope software which will auto-configure for that specific probe.\u003cbr\u003e• Provides power from the scope module to the probe, great for overnight battery drain tests! \u003cbr\u003e• Will Auto-zero current clamps and other probes.\u003cbr\u003e• Includes bright status lights for each channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope 4425A Hardware\u003c\/strong\u003e\u003cbr\u003eThe PicoScope 4425A scope module includes the features that make PicoScope hardware the most powerful and versatile automotive scope:\u003cbr\u003e• ±200 V to ±50 mV input ranges with floating inputs\u003cbr\u003e• Up to 400 M samples\/second (Fast enough for FlexRay, CAN FD etc.)\u003cbr\u003e• 512MB Deep Memory inside the scope (Capture intermittent faults that other scopes miss)\u003cbr\u003e• ConnectDetect® for confirmation of good contact\u003cbr\u003e• USB2 or USB3 connectivity to PC\u003cbr\u003e• Hardware frequency coupling\u003cbr\u003e• Hardware \u0026amp; software triggers and filters\u003cbr\u003e• NVH (Noise, Vibration \u0026amp; Harshness) diagnostics\u003cbr\u003e• Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e• Compatible with Pico NVH interfaces. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope Software\u003c\/strong\u003e\u003cbr\u003ePico has continuously upgraded and improved their Windows-based automotive software for over 20 years. Beginning with PicoScope 7, it is optimized for touchscreen\/tablet devices and will become compatible with Linux and macOS. With PicoScope software you can:\u003cbr\u003e• Set up your scope quickly with over 150 guided tests\u003cbr\u003e• Auto-configure PicoBNC+™ probes \u003cbr\u003e• See your waveforms in high definition and with minimal delay.\u003cbr\u003e• Evaluate your waveforms with powerful tools: Math channels, Masks\/Alarms, Serial Decoding, Rotation\/Phase markers (eg 720 degree rotation)\u003cbr\u003e• Save and share your waveforms\u003cbr\u003e• Exclusive access to the Pico Waveform Library with over 5500 entries.\u003cbr\u003e• PicoDiagnostics for NVH, Cylinder compression, battery, alternator and starter testing, cylinder misfires \/ balance\u003cbr\u003e• Get free updates for PicoScope Automotive software with no subscriptions or in-app purchases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents of the Pico PQ180 ADVANCED Diagnostic Kit \u003c\/strong\u003e\u003cbr\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4425A 4-channel scope module (PR340)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Blue, 4mm permanent ground (TA404)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Red, 4mm permanent ground (TA405)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Green, 4mm permanent ground (TA406)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Yellow, 4mm permanent ground (TA407)\u003cbr\u003e2 - PicoBNC+ 10:1 scope probe (TA506)\u003cbr\u003e1 - PicoBNC+ resistance test lead (TA432 \/ MI487)\u003cbr\u003e1 - PicoBNC+ Temperature probe (wide-range linear) (TA395 \/ MI482)\u003cbr\u003e1 - Ultrasonic Parking Sensor Detector (TA329)\u003cbr\u003e1 - Professional 4-way breakout lead set in rollup bag (TA514)\u003cbr\u003e1 - 2-pin breakout lead (TA012)\u003cbr\u003e1 - Breakout Lead 2 pin ACS (TA190)\u003cbr\u003e\u003cem\u003eIgnition\u003c\/em\u003e\u003cbr\u003e4 - PicoBNC+ secondary ignition pickup (TA397)\u003cbr\u003e1 - PicoBNC+ COP probe (TA398)\u003cbr\u003e1 - Earth wire for coil pack 45cm long (TA106)\u003cbr\u003e4 - HT extension test lead (TA037)\u003cbr\u003e\u003cem\u003eCurrent \u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 60A AC\/DC Current Clamp (TA473)\u003cbr\u003e1 - PicoBNC+ 200A\/2000A AC\/DC Current Clamp  (TA388)\u003cbr\u003e1 - Fuse Extension Lead for ATC (TA034)\u003cbr\u003e1 - Fuse Extension Lead for Maxi (TA206)\u003cbr\u003e1 - Fuse Extension Lead for Mini (TA035)\u003cbr\u003e1 - Fuse Extension Lead for JCASE (TA168)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e2 - Small crocodile clip (black) (TA003)\u003cbr\u003e2 - Small crocodile clip (red) (TA004)\u003cbr\u003e1 - Dolphin clip 1000V CATlll (black) (TA005)\u003cbr\u003e1 - Dolphin clip  1000V CATlll (red) (TA006)\u003cbr\u003e2 - Multimeter style test probe (black) (TA001)\u003cbr\u003e2 - Multimeter style test probe (red) (TA002)\u003cbr\u003e2 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e2 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e4 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e4 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e4 - 4mm shrouded to unshrouded adaptor red (TA017)\u003cbr\u003e1 - Electronics Acupuncture Probes (TA008)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e2 - S Hook (Ml168)\u003cbr\u003e1 - 6 pocket roll up pouch in black (PA147)\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - USB Cable: 2.0, 4.5 meters (Mi121)\u003cbr\u003e1 - Carry Case : 4425A Standard (PA209)\u003cbr\u003e1 - \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-or-BNC-SCOPE-p9950.html\"\u003eFoam Tray Organizer for BNC+ or BNC SCOPE\u003c\/a\u003e (PA192)\u003cbr\u003e1 - \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-2000A-60A-COP-p9951.html\"\u003eFoam Tray Organizer for BNC+ 2000A, 60A, COP\u003c\/a\u003e (PA194)\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e1 - 24-months - Scope module\u003cbr\u003e1 - 12-months - all other items\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003eTo ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667499606329,"sku":"pt-PQ281","price":4670.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Pico_4-Channel_4425A_ADVANCED_Diagnostic_Kit_with_Case_and_Foam__PQ281__pt-PQ281_1.webp?v=1744227667"},{"product_id":"pico-4-channel-4425a-master-diagnostic-kit-in-foam-pq237","title":"Pico 4-Channel 4425A MASTER Diagnostic Kit in Foam (PQ237)","description":"\u003cp\u003eThe Pico PQ237 Diagnostic Kit in Foam combines Pico's 4425A MASTER Diagnostic Kit (PQ194) (without the case) with 6 foam trays.\u003c\/p\u003e\n\u003cp\u003eThe Pico PQ194 MASTER Diagnostic Kit includes almost everything Pico offers for a lab scope.  In addition to the 4425A Picoscope module and PicoBNC+™ test probes, it includes fuse extensions (ATC, JCASE, Maxi, Mini), 6-way Breakout Lead Set, CAN Test Box, the WPS500X transducer and many other accessories in an extra large carrying case. The 4425A uses PicoScope Automotive software which is updated continuously with no subscription costs or in-app purchases. It's easy for students and novices to use, and powerful enough for Master Technicians, trainers, and instructors.  \u003c\/p\u003e\n\u003cp\u003eThe 4425A generation of Picoscope utilizes PicoBNC+™ that provides smart probe interfacing, powered probes, and status lights on each channel, as well as full compatibility with your existing PicoScope or third-party BNC probes. Image below shows probes with PicoBNC+™ and traditional BNC connected to the 4425A.\u003c\/p\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" src=\"https:\/\/www.aeswave.com\/images\/products\/22258.png?1586974906\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe unique capabilities and characteristics of the PicoBNC+™ include:\u003cbr\u003e• Push to connect, does not require a twist like old-fashioned BNC connectors. \u003cbr\u003e• Identifies the probe to PicoScope software which will auto-configure for that specific probe.\u003cbr\u003e• Provides power from the scope module to the probe, great for overnight battery drain tests! \u003cbr\u003e• Will Auto-zero current clamps and other probes.\u003cbr\u003e• Includes bright status lights for each channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope 4425A Hardware\u003c\/strong\u003e\u003cbr\u003eThe PicoScope 4425A scope module includes the features that make PicoScope hardware the most powerful and versatile automotive scope:\u003cbr\u003e• ±200 V to ±50 mV input ranges with floating inputs\u003cbr\u003e• Up to 400 M samples\/second (Fast enough for FlexRay, CAN FD etc.)\u003cbr\u003e• 512MB Deep Memory inside the scope (Capture intermittent faults that other scopes miss)\u003cbr\u003e• ConnectDetect® for confirmation of good contact\u003cbr\u003e• USB2 or USB3 connectivity to PC\u003cbr\u003e• Hardware frequency coupling\u003cbr\u003e• Hardware \u0026amp; software triggers and filters\u003cbr\u003e• NVH (Noise, Vibration \u0026amp; Harshness) diagnostics\u003cbr\u003e• Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e• Compatible with Pico NVH interfaces. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope Software\u003c\/strong\u003e\u003cbr\u003ePico has continuously upgraded and improved their Windows-based automotive software for over 20 years. Beginning with PicoScope 7, it is optimized for touchscreen\/tablet devices and will become compatible with Linux and macOS. With PicoScope software you can:\u003cbr\u003e• Set up your scope quickly with over 150 guided tests\u003cbr\u003e• Auto-configure PicoBNC+™ probes \u003cbr\u003e• See your waveforms in high definition and with minimal delay.\u003cbr\u003e• Evaluate your waveforms with powerful tools: Math channels, Masks\/Alarms, Serial Decoding, Rotation\/Phase markers (eg 720 degree rotation)\u003cbr\u003e• Save and share your waveforms\u003cbr\u003e• Exclusive access to the Pico Waveform Library with over 5500 entries.\u003cbr\u003e• PicoDiagnostics for NVH, Cylinder compression, battery, alternator and starter testing, cylinder misfires \/ balance\u003cbr\u003e• Get free updates for PicoScope Automotive software with no subscriptions or in-app purchases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents of the Pico PQ194 MASTER Diagnostic Kit \u003c\/strong\u003e\u003cbr\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4425A 4-channel scope module (PR340)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Blue, 4mm permanent ground (TA404)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Red, 4mm permanent ground (TA405)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Green, 4mm permanent ground (TA406)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Yellow, 4mm permanent ground (TA407)\u003cbr\u003e4 - PicoBNC+ 10:1 scope probe (TA506)\u003cbr\u003e1 - PicoBNC+ resistance test lead (TA432 \/ MI487)\u003cbr\u003e1 - PicoBNC+ Temperature probe (wide-range linear) (TA395 \/ MI482)\u003cbr\u003e1 - Ultrasonic Parking Sensor Detector (TA329)\u003cbr\u003e1 - Keyless Entry Detector (TA330)\u003cbr\u003e1 - Professional 4-way breakout lead set in roll up pouch (TA514)\u003cbr\u003e1 - 2-pin breakout lead (TA012)\u003cbr\u003e1 - Breakout Lead 2 pin ACS (TA190)\u003cbr\u003e1 - Breakout Lead 3 pin Kostal (TA191)\u003cbr\u003e1 - Breakout Lead 2 pin Kostal (TA194)\u003cbr\u003e1 - Breakout lead 3 pin amp superseal (TA267)\u003cbr\u003e1 - CAN Test Box (TA069)\u003cbr\u003e\u003cem\u003eIgnition\u003c\/em\u003e\u003cbr\u003e4 - PicoBNC+ secondary ignition pickup (TA397)\u003cbr\u003e1 - PicoBNC+ COP probe (TA398)\u003cbr\u003e1 - Earth wire for coil pack 45cm long (TA106)\u003cbr\u003e4 - HT extension test lead (TA037)\u003cbr\u003e\u003cem\u003eCurrent \u003c\/em\u003e\u003cbr\u003e2 - PicoBNC+ 60A AC\/DC Current Clamp (TA473)\u003cbr\u003e1 - PicoBNC+ 200A\/2000A AC\/DC Current Clamp  (TA388)\u003cbr\u003e1 - Fuse Extension Lead for ATC (TA034)\u003cbr\u003e1 - Fuse Extension Lead for Maxi (TA206)\u003cbr\u003e1 - Fuse Extension Lead for Mini (TA035)\u003cbr\u003e1 - Fuse Extension Lead for JCASE (TA168)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e2 - Small crocodile clip (black) (TA003)\u003cbr\u003e2 - Small crocodile clip (red) (TA004)\u003cbr\u003e1 - Dolphin clip 1000V CATlll (black) (TA005)\u003cbr\u003e1 - Dolphin clip  1000V CATlll (red) (TA006)\u003cbr\u003e2 - Multimeter style test probe (black) (TA001)\u003cbr\u003e2 - Multimeter style test probe (red) (TA002)\u003cbr\u003e2 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e2 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e1 - Shrouded 4mm to sprung hook (black) (TA089)\u003cbr\u003e1 - Shrouded 4mm to sprung hook (red) (TA090)\u003cbr\u003e4 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e4 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e4 - 4mm shrouded to unshrouded adaptor red (TA017)\u003cbr\u003e1 - Insulation piercing test clip (pack of 2) (TA007)\u003cbr\u003e1 - Electronics Acupuncture Probes (TA008)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e2 - S Hook (Ml168)\u003cbr\u003e1 - 6 pocket roll up pouch in black (PA147)\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - USB Cable: 2.0, 4.5 meters (Mi121)\u003cbr\u003e1 - Carry Case: PiBow Master Kit - Heavy 4040 Black (PA210)\u003cbr\u003e\u003cem\u003eTransducer\u003c\/em\u003e\u003cbr\u003e1 - WPS500X pressure transducer  (TA071)\u003cbr\u003e1 - Cable: insulated BNC to insulated BNC, 5 meters (TA130)\u003cbr\u003e1 - Standard compression hose for WPS500 (TA212)\u003cbr\u003e1 - Adaptor M10 short reach (TA213)\u003cbr\u003e1 - Adaptor M10 deep reach (TA214)\u003cbr\u003e1 - Adaptor M12 deep reach (TA216)\u003cbr\u003e1 - Adaptor M14 short reach (TA217)\u003cbr\u003e1 - Adaptor M14 deep reach (TA218)\u003cbr\u003e1 - Adaptor M16 Ford Triton (TA219)\u003cbr\u003e1 - Adaptor M18 (TA220)\u003cbr\u003e1 - Exhaust adaptor for WPS500 pressure transducer (TA087)\u003cbr\u003e1 - Vacuum hose for WPS500 pressure transducer (TA085)\u003cbr\u003e1 - Bleed hose for WPS500 pressure transducer (TA086)\u003cbr\u003e1 - Universal vacuum adaptor (TA129)\u003cbr\u003e1 - Vacuum tap for WPS500 (brass) (TA226)\u003cbr\u003e1 - Fuel hose for WPS500, large schrader (TA083)\u003cbr\u003e1 - Fuel hose for WPS500, small Schrader (TA117)\u003cbr\u003e1 - Fuel hose pressure tap: small (brass) (TA235)\u003cbr\u003e1 - Fuel hose pressure tap: medium (brass) (TA236)\u003cbr\u003e1 - Foster 2 series quick couplerfemale to 1\/4 NPT male (TA142)\u003cbr\u003e1 - Adaptor WPS500 female to AST male (TA229)\u003cbr\u003e1 - Adaptor AST to WPS500 (TA224)\u003cbr\u003e1 - WPS500 Adaptor Kit B (TA250)\u003cbr\u003e1 - Large hose adaptor (Firstlook) (TA166)\u003cbr\u003e1 - USB Cable: A male to mini 5 pin, 2 meters (TA081)\u003cbr\u003e1 - Foam Tray Organizer for BNC+ or BNC SCOPE (PA192)\u003cbr\u003e1 - Foam Tray Organizer for BNC+ 2000A, 60A, COP (PA194)\u003cbr\u003e1 - Foam Tray Organizer for BNC+ 2000Ax2, 60Ax1 (PA195)\u003cbr\u003e1 - Foam Tray Organizer for CAN PP619 (PA197)\u003cbr\u003e1 - Foam Tray Organizer for WPS500 (PA198)\u003cbr\u003e1 - Foam Tray Organizer for BREAKOUT LEADS (PA200)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e1 - 24-months - Scope module\u003cbr\u003e1 - 12-months - all other items\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003eTo ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667499770169,"sku":"pt-PQ237","price":7429.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/24059.jpg?v=1689078076"},{"product_id":"pico-4-channel-4425a-master-diagnostic-kit-with-case-and-foam-pq282","title":"Pico 4-Channel 4425A MASTER Diagnostic Kit with Case and Foam (PQ282)","description":"\u003cp\u003e(AES# pt-PQ194-FC) Pico PQ282\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Pico PQ282 Diagnostic Kit with Case and Foam combines Pico's 4425A MASTER Diagnostic Kit (PQ194) (with the case) and with 6 foam trays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/4-Channel-Pico-4425A-MASTER-Diagnostic-Kit-PQ194-p9839.html\"\u003ePico 4-Channel 4425A MASTER Diagnostic Kit\u003c\/a\u003e (PQ194) (with the case)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-or-BNC-SCOPE-p9950.html\"\u003eFoam Tray Organizer for BNC+ or BNC SCOPE\u003c\/a\u003e (PA192)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-2000A-60A-COP-p9951.html\"\u003eFoam Tray Organizer for BNC+ 2000A, 60A, COP\u003c\/a\u003e (PA194)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-2000Ax2-60Ax1-p9952.html\"\u003eFoam Tray Organizer for BNC+ 2000Ax2, 60Ax1\u003c\/a\u003e (PA195)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-CAN-PP619-p9954.html\"\u003eFoam Tray Organizer for CAN PP619\u003c\/a\u003e (PA197)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-WPS500-p9955.html\"\u003eFoam Tray Organizer for WPS500\u003c\/a\u003e (PA198)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BREAKOUT-LEADS-p9957.html\"\u003eFoam Tray Organizer for BREAKOUT LEADS\u003c\/a\u003e (PA200)\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667499835705,"sku":"pt-PQ282","price":7794.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/24316.jpg?v=1689078077"},{"product_id":"pico-4-channel-4425a-engine-and-hydraulics-kit-in-foam-pq238","title":"Pico 4-Channel 4425A Engine and Hydraulics Kit in Foam (PQ238)","description":"\u003cp\u003eThe Pico PQ238 Diagnostic Kit in Foam combines Pico's 4425A Engine \u0026amp; Hydraulics Kit (PQ195) (without the case) with 2 foam trays.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003cbr\u003e - \u003ca href=\"https:\/\/www.aeswave.com\/4-Channel-Pico-4425A-Engine-and-Hydraulics-Kit-PQ195-p9840.html\"\u003ePico 4-Channel 4425A Engine \u0026amp; Hydraulics Kit\u003c\/a\u003e (PQ195) (without the case)\u003cbr\u003e - \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-or-BNC-SCOPE-p9950.html\"\u003eFoam Tray Organizer for BNC+ or BNC SCOPE\u003c\/a\u003e (PA192)\u003cbr\u003e - \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-2000A-60A-COP-p9951.html\"\u003eFoam Tray Organizer for BNC+ 2000A, 60A, COP\u003c\/a\u003e (PA194)\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667500130617,"sku":"PT-PQ238","price":5574.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Pico_4-Channel_4425A_Engine_and_Hydraulics_Kit_in_Foam__PQ238__PT-PQ238_1.webp?v=1744225474"},{"product_id":"pico-4-channel-4425a-engine-and-hydraulics-kit-with-case-and-foam-pq285","title":"Pico 4-Channel 4425A Engine and Hydraulics Kit with Case and Foam (PQ285)","description":"\u003cp\u003e(AES# pt-PQ285) pt-PQ195-FC\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Pico PQ285 Diagnostic Kit with Case and Foam combines Pico's 4425A Engine \u0026amp; Hydraulics Kit (PQ195) (with the case) and with 2 foam trays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/4-Channel-Pico-4425A-Engine-and-Hydraulics-Kit-PQ195-p9840.html\"\u003ePico 4-Channel 4425A Engine \u0026amp; Hydraulics Kit\u003c\/a\u003e (PQ195) (with the case)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-or-BNC-SCOPE-p9950.html\"\u003eFoam Tray Organizer for BNC+ or BNC SCOPE\u003c\/a\u003e (PA192)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-2000A-60A-COP-p9951.html\"\u003eFoam Tray Organizer for BNC+ 2000A, 60A, COP\u003c\/a\u003e (PA194)\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667500294457,"sku":"pt-PQ285","price":5303.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Pico_4-Channel_4425A_Engine_and_Hydraulics_Kit_with_Case_and_Foam__PQ285__pt-PQ285_1.webp?v=1744227671"},{"product_id":"pico-4-channel-4425a-ev-kit-in-foam-pq236","title":"Pico 4-Channel 4425A EV Kit in Foam (PQ236)","description":"\u003cp\u003e(AES# pt-PQ196-F) Pico PQ236\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Pico PQ236 Diagnostic Kit in Foam combines Pico's 4425A EV Kit (PQ196) (without the case) and with 6 foam trays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/4-Channel-Pico-4425A-EV-Kit-PQ196-p9921.html\"\u003ePico 4425A EV Kit\u003c\/a\u003e (PQ196) (without the case)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-or-BNC-SCOPE-p9950.html\"\u003eFoam Tray Organizer for BNC+ or BNC SCOPE\u003c\/a\u003e (PA192)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-2000A-60A-COP-p9951.html\"\u003eFoam Tray Organizer for BNC+ 2000A, 60A, COP\u003c\/a\u003e (PA194)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-2000Ax2-60Ax1-p9952.html\"\u003eFoam Tray Organizer for BNC+ 2000Ax2, 60Ax1\u003c\/a\u003e (PA195)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BREAKOUT-LEADS-p9957.html\"\u003eFoam Tray Organizer for BREAKOUT LEADS\u003c\/a\u003e (PA200)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-EV-2-pole-tester-1400V-Diff-p9958.html\"\u003eFoam Tray Organizer for EV. 2-pole tester. 1400V Diff \u003c\/a\u003e(PA204)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-EV-INSULATION-TESTER-p9959.html\"\u003eFoam Tray Organizer for EV INSULATION TESTER\u003c\/a\u003e (PA205)\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667500392761,"sku":"pt-PQ236","price":5701.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/24065.jpg?v=1689078084"},{"product_id":"pico-4-channel-4425a-ev-kit-with-case-and-foam-pq284","title":"Pico 4-Channel 4425A EV Kit with Case and Foam (PQ284)","description":"\u003cp\u003e(AES# pt-PQ196-FC) Pico PQ284\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Pico PQ284 Diagnostic Kit with Case and Foam combines Pico's 4425A EV Kit (PQ196) (with the case) and with 6 foam trays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/4-Channel-Pico-4425A-EV-Kit-PQ196-p9921.html\"\u003ePico 4425A EV Kit\u003c\/a\u003e (PQ196) (with the case)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-or-BNC-SCOPE-p9950.html\"\u003eFoam Tray Organizer for BNC+ or BNC SCOPE\u003c\/a\u003e (PA192)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-2000A-60A-COP-p9951.html\"\u003eFoam Tray Organizer for BNC+ 2000A, 60A, COP\u003c\/a\u003e (PA194)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-2000Ax2-60Ax1-p9952.html\"\u003eFoam Tray Organizer for BNC+ 2000Ax2, 60Ax1\u003c\/a\u003e (PA195)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BREAKOUT-LEADS-p9957.html\"\u003eFoam Tray Organizer for BREAKOUT LEADS\u003c\/a\u003e (PA200)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-EV-2-pole-tester-1400V-Diff-p9958.html\"\u003eFoam Tray Organizer for EV. 2-pole tester. 1400V Diff \u003c\/a\u003e(PA204)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-EV-INSULATION-TESTER-p9959.html\"\u003eFoam Tray Organizer for EV INSULATION TESTER\u003c\/a\u003e (PA205)\u003cbr\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667500851513,"sku":"pt-PQ284","price":5912.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/24071.jpg?v=1689078086"},{"product_id":"pico-4-channel-4425a-vehicle-assessor-kit-in-foam-pq233","title":"Pico 4-Channel 4425A Vehicle Assessor Kit in Foam (PQ233)","description":"\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eCurrently backordered, ETA Late March.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cspan style=\"color: #000000;\"\u003eThe PQ222 4425A Assessor's Kit is one of 2 PicoScope kit's that include the WPS500X Pressure transducer, the other being the Master kit. This kit includes a high current clamp, but does not includes a low current clamp. The Pressure transducer is accompanied by a vacuum hose and exhaust hose. The compression hose and adapter fittings used for in-cylinder testing must be \u003ca href=\"https:\/\/www.aeswave.com\/Universal-Compression-Hose-High-Strength-p9307.html\"\u003epurchased separately\u003c\/a\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eContents of the Pico PQ222 Vehicle Assessor Diagnostic Kit \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4425A 4-channel scope module (PR340)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Blue, 4mm permanent ground (TA404)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Red, 4mm permanent ground (TA405)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Green, 4mm permanent ground (TA406)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Yellow, 4mm permanent ground (TA407)\u003cbr\u003e1 - PicoBNC+ 10:1 scope probe (TA499)\u003cbr\u003e\u003cem\u003eIgnition\u003c\/em\u003e\u003cbr\u003e2 - PicoBNC+ secondary ignition pickup (TA397)\u003cbr\u003e\u003cem\u003eCurrent \u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 200A\/2000A AC\/DC Current Clamp  (TA388)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e2 - Small crocodile clip (black) (TA003)\u003cbr\u003e2 - Small crocodile clip (red) (TA004)\u003cbr\u003e1 - Multimeter style test probe (black) (TA001)\u003cbr\u003e1 - Multimeter style test probe (red) (TA002)\u003cbr\u003e1 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e2 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e2 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e2 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e1 - S Hook (Ml168)\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - Carry Case: 4425A Assessory Case (PA211)\u003cbr\u003e\u003cem\u003eTransducer\u003c\/em\u003e\u003cbr\u003e1 - WPS500X pressure transducer  (TA071)\u003cbr\u003e1 - Cable: insulated BNC to insulated BNC, 5 meters (TA130)\u003cbr\u003e1 - Exhaust adaptor for WPS500 pressure transducer (TA087)\u003cbr\u003e1 - Vacuum hose for WPS500 pressure transducer (TA085)\u003cbr\u003e1 - Large hose adaptor (Firstlook) (TA166)\u003cbr\u003e\u003cspan\u003e1 - \u003c\/span\u003e\u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-or-BNC-SCOPE-p9950.html\"\u003eFoam Tray Organizer for BNC+ or BNC SCOPE\u003c\/a\u003e\u003cspan\u003e (PA192)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 - \u003c\/span\u003e\u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-2000A-60A-COP-p9951.html\"\u003eFoam Tray Organizer for BNC+ 2000A, 60A, COP\u003c\/a\u003e\u003cspan\u003e (PA194)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 - \u003c\/span\u003e\u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-WPS500-p9955.html\"\u003eFoam Tray Organizer for WPS500\u003c\/a\u003e\u003cspan\u003e (PA198)\u003c\/span\u003e\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e1 - 24-months - Scope module\u003cbr\u003e1 - 12-months - all other items\u003c\/p\u003e\n\u003cp\u003ePlease note, the transducer\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.aeswave.com\/Universal-Compression-Hose-High-Strength-p9307.html\"\u003ecompression hose and spark plug adapters are sold separatetly\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003eTo ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667500917049,"sku":"pt-PQ233","price":3572.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/Pico_4-Channel_4425A_Vehicle_Assessor_Kit_in_Foam__PQ233__pt-PQ233_1.webp?v=1744227675"},{"product_id":"pico-4-channel-4425a-vehicle-assessor-kit-with-case-and-foam-pq283","title":"Pico 4-Channel 4425A Vehicle Assessor Kit with Case and Foam (PQ283)","description":"\u003cp\u003eThe Pico PQ283 Diagnostic Kit with Case and Foam combines Pico's 4425A Vehicle Assessor Kit (PQ222) (with the case) and with 3 foam trays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/4-Channel-Pico-4425A-Vehicle-Assessor-Kit-PQ222-p9842.html\"\u003ePico 4-Channel 4425A Vehicle Assessor Kit\u003c\/a\u003e (PQ222) (with the case)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-or-BNC-SCOPE-p9950.html\"\u003eFoam Tray Organizer for BNC+ or BNC SCOPE\u003c\/a\u003e (PA192)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-BNC-2000A-60A-COP-p9951.html\"\u003eFoam Tray Organizer for BNC+ 2000A, 60A, COP\u003c\/a\u003e (PA194)\u003cbr\u003e- \u003ca href=\"https:\/\/www.aeswave.com\/Foam-Tray-Organizer-for-WPS500-p9955.html\"\u003eFoam Tray Organizer for WPS500\u003c\/a\u003e (PA198)\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667500982585,"sku":"pt-PQ283","price":3715.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/products\/24319.jpg?v=1689078089"},{"product_id":"picoscope-4-channel-off-highway-entry-kit","title":"Picoscope 4-Channel Off-Highway Entry Kit","description":"\u003cp\u003eCreated for fault diagnosis on trucks, tractors, forklifts, boats, combine harvesters, excavators and more, the PQ324 off-highway kit open up new markets and opportunities for you. The successful application of Pico products to these vehicles has been widely demonstrated by the many related case studies published on our website and in newsletters, as well as by a growing HD-OH support forum and community.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22258.png?v=1689077578?1586974906\" style=\"height: 125px; width: 500px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe kits contain a modified PS4425A PicoScope having additional protection to better withstand off-highway conditions. The included accessories help users quickly connect and easily carry out non-intrusive and non-invasive measurements on a wide variety of systems and components found in these vehicles.\u003c\/p\u003e\n\u003cp\u003eIn support of the new off-highway kits, Pico will be releasing an initial set of ten HD-OH guided tests in the PicoScope software. The tests include information and materials to help HD-OH technicians start their oscilloscope diagnostics journey. Specifically, the tests cover 24 V battery, Bosch Denoxtronic, J1939 communications, engine and hydraulic system and component testing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope 4425A Hardware\u003c\/strong\u003e\u003cbr\u003eThe PicoScope 4425A scope module includes the features that make PicoScope hardware the most powerful and versatile automotive scope:\u003cbr\u003e• ±200 V to ±50 mV input ranges with floating inputs\u003cbr\u003e• Up to 400 M samples\/second (Fast enough for FlexRay, CAN FD etc.)\u003cbr\u003e• 512MB Deep Memory inside the scope (Capture intermittent faults that other scopes miss)\u003cbr\u003e• ConnectDetect® for confirmation of good contact\u003cbr\u003e• USB2 or USB3 connectivity to PC\u003cbr\u003e• Hardware frequency coupling\u003cbr\u003e• Hardware \u0026amp; software triggers and filters\u003cbr\u003e• NVH (Noise, Vibration \u0026amp; Harshness) diagnostics\u003cbr\u003e• Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e• Compatible with Pico NVH interfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope Software\u003c\/strong\u003e\u003cbr\u003ePico has continuously upgraded and improved their Windows-based automotive software for over 20 years. Beginning with PicoScope 7, it is optimized for touchscreen\/tablet devices and will become compatible with Linux and macOS. With PicoScope software you can:\u003cbr\u003e• Set up your scope quickly with over 150 guided tests (10 New HD-OH specific tests)\u003cbr\u003e• Auto-configure PicoBNC+™ probes \u003cbr\u003e• See your waveforms in high definition and with minimal delay.\u003cbr\u003e• Evaluate your waveforms with powerful tools: Math channels, Masks\/Alarms, Serial Decoding, Rotation\/Phase markers (eg 720 degree rotation)\u003cbr\u003e• Save and share your waveforms\u003cbr\u003e• Exclusive access to the Pico Waveform Library with over 5500 entries.\u003cbr\u003e• PicoDiagnostics for NVH, Cylinder compression, battery, alternator and starter testing, cylinder misfires \/ balance\u003cbr\u003e• Get free updates for PicoScope Automotive software with no subscriptions or in-app purchases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGuided Tests\u003c\/strong\u003e\u003cbr\u003ePico's team of experts have added ten HD-OH specific tests to the PicoScope 7 Automotive Guided Test library. The tests include information and materials to help HD-OH technicians start their oscilloscope diagnostics journey, including guidance on the method and equipment used to complete the test and capture a waveform. With a pre-loaded example waveform for comparison and the scope settings automatically set, there is no more supportive diagnostic tool for your off-highway vehicle diagnosis.\u003cbr\u003eGT903 – Denox 2.2 health check\u003cbr\u003eGT904 – Engine health and performance system test\u003cbr\u003eGT907 – 24V battery starting and charging in parallel\u003cbr\u003eGT908 – 24V battery starting and charging in series\u003cbr\u003eGT909 – Electronically controlled unit injector\u003cbr\u003eGT911 – J1939 serial decoding\u003cbr\u003eGT913 – Common rail pressure hold check. System leak test\u003cbr\u003eGT914 – Relative compression\u003cbr\u003eGT933 – Hydraulic pressure\u003cbr\u003eGT934 – Hydraulic flow\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCase Studies\u003c\/strong\u003e\u003cbr\u003eUse Pico's off-highway kits to open up new markets and opportunities for you.\u003cbr\u003e- \u003ca href=\"https:\/\/www.picoauto.com\/library\/case-studies\/komatsu-pc210-lc-adblue-fault\" target=\"_blank\"\u003eKomatsu PC210 LC | Komatsu PC210 LC AdBlue fault\u003c\/a\u003e\u003cbr\u003e- \u003ca href=\"https:\/\/www.picoauto.com\/library\/case-studies\/wheel-loader-with-loss-of-communication\" target=\"_blank\"\u003eCase 821F | Wheel Loader with Loss of Communication\u003c\/a\u003e\u003cbr\u003e- \u003ca href=\"https:\/\/www.picoauto.com\/library\/case-studies\/iveco-eurocargo\" target=\"_blank\"\u003eIveco Eurocargo\u003c\/a\u003e\u003cbr\u003e- \u003ca href=\"https:\/\/www.picoauto.com\/library\/case-studies\/daf-def-warnings\" target=\"_blank\"\u003eDAF CF | DAF DEF warnings\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4425A 4-channel scope module (PR347)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Blue, 4mm permanent ground (TA475)\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Red, 4mm permanent ground (TA476)\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Green, 4mm permanent ground (TA477)\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Yellow, 4mm permanent ground (TA478)\u003cbr\u003e1 - PicoBNC+ 10:1 scope probe (TA499)\u003cbr\u003e1 - PicoBNC+ Resistance Test Lead(TA432)\u003cbr\u003e1 - 2-pin Breakout Lead (TA012)\u003cbr\u003e1 - 2-pin ACS Breakout Lead (TA190)\u003cbr\u003e1 - 2-pin Deustsch DTxx-2 (TA192)\u003cbr\u003e1 - 3-pin AMP Superseal Breakout Lead (TA267)\u003cbr\u003e\u003cem\u003eCurrent \u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 60A Compact Current Clamp (TA496)\u003cbr\u003e1 - PicoBNC+ 200A\/2000A AC\/DC Current Clamp (TA388)\u003cbr\u003e1 - Fuse Extension Lead for ATC (TA034)\u003cbr\u003e1 - Fuse Extension Lead for Mini (TA035)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e1 - Multimeter style test probe (black) (TA001)\u003cbr\u003e1 - Multimeter style test probe (red) (TA002)\u003cbr\u003e2 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e2 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e2 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e2 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e1 - Insulation Piercing Test Clip: pack of 2 (TA007)\u003cbr\u003e1 - Electronics Acupuncture Probes (TA008)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e1 - S Hook (Mi168)\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - USB Cable: USB 2.0 blue, 4.5 meters (Mi121)\u003cbr\u003e1 - Carry Case : 4425A Standard (PA209)\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e1 - 24-months - Scope module\u003cbr\u003e1 - 12-months - all other items\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003eTo ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667653648697,"sku":"pt-PQ324","price":3290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/picoscope_4-channel_off-highway_entry_kit_pt-pq324_1.webp?v=1744239064"},{"product_id":"picoscope-4-channel-off-highway-expert-kit","title":"Picoscope 4-Channel Off-Highway Expert Kit","description":"\u003cp\u003e(AES# pt-PQ324)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCreated for fault diagnosis on trucks, tractors, forklifts, boats, combine harvesters, excavators and more, the PQ324 off-highway kit open up new markets and opportunities for you. The successful application of Pico products to these vehicles has been widely demonstrated by the many related case studies published on our website and in newsletters, as well as by a growing HD-OH support forum and community.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22258.png?v=1689077578?1586974906\" style=\"height: 125px; width: 500px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe kits contain a modified PS4425A PicoScope having additional protection to better withstand off-highway conditions. The included accessories help users quickly connect and easily carry out non-intrusive and non-invasive measurements on a wide variety of systems and components found in these vehicles.\u003c\/p\u003e\n\u003cp\u003eIn support of the new off-highway kits, Pico will be releasing an initial set of ten HD-OH guided tests in the PicoScope software. The tests include information and materials to help HD-OH technicians start their oscilloscope diagnostics journey. Specifically, the tests cover 24 V battery, Bosch Denoxtronic, J1939 communications, engine and hydraulic system and component testing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope 4425A Hardware\u003c\/strong\u003e\u003cbr\u003eThe PicoScope 4425A scope module includes the features that make PicoScope hardware the most powerful and versatile automotive scope:\u003cbr\u003e• ±200 V to ±50 mV input ranges with floating inputs\u003cbr\u003e• Up to 400 M samples\/second (Fast enough for FlexRay, CAN FD etc.)\u003cbr\u003e• 512MB Deep Memory inside the scope (Capture intermittent faults that other scopes miss)\u003cbr\u003e• ConnectDetect® for confirmation of good contact\u003cbr\u003e• USB2 or USB3 connectivity to PC\u003cbr\u003e• Hardware frequency coupling\u003cbr\u003e• Hardware \u0026amp; software triggers and filters\u003cbr\u003e• NVH (Noise, Vibration \u0026amp; Harshness) diagnostics\u003cbr\u003e• Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e• Compatible with Pico NVH interfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope Software\u003c\/strong\u003e\u003cbr\u003ePico has continuously upgraded and improved their Windows-based automotive software for over 20 years. Beginning with PicoScope 7, it is optimized for touchscreen\/tablet devices and will become compatible with Linux and macOS. With PicoScope software you can:\u003cbr\u003e• Set up your scope quickly with over 150 guided tests (10 New HD-OH specific tests)\u003cbr\u003e• Auto-configure PicoBNC+™ probes \u003cbr\u003e• See your waveforms in high definition and with minimal delay.\u003cbr\u003e• Evaluate your waveforms with powerful tools: Math channels, Masks\/Alarms, Serial Decoding, Rotation\/Phase markers (eg 720 degree rotation)\u003cbr\u003e• Save and share your waveforms\u003cbr\u003e• Exclusive access to the Pico Waveform Library with over 5500 entries.\u003cbr\u003e• PicoDiagnostics for NVH, Cylinder compression, battery, alternator and starter testing, cylinder misfires \/ balance\u003cbr\u003e• Get free updates for PicoScope Automotive software with no subscriptions or in-app purchases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4425A 4-channel scope module (PR347)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Blue, 4mm permanent ground (TA475)\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Red, 4mm permanent ground (TA476)\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Green, 4mm permanent ground (TA477)\u003cbr\u003e1 - PicoBNC+ 5-meter Test Lead: Yellow, 4mm permanent ground (TA478)\u003cbr\u003e2 - PicoBNC+ 10:1 scope probe (TA499)\u003cbr\u003e1 - PicoBNC+ Resistance Test Lead(TA432)\u003cbr\u003e1 - PicoBNC+ Wide-Range Linear Temperature Probe (TA395)\u003cbr\u003e2 - 2-pin Breakout Lead (TA012)\u003cbr\u003e2 - 2-pin ACS Breakout Lead (TA190)\u003cbr\u003e2 - 2-pin Deustsch DTxx-2 (TA192)\u003cbr\u003e1 - 3-pin AMP Superseal Breakout Lead (TA267)\u003cbr\u003e1 - 3-pin Kostal Breakout Lead (TA191)\u003cbr\u003e1 - 4-pin Deutsch Large Breakout Lead DTxx-4 (TA193)\u003cbr\u003e1 - 2-pin Kostal Breakout Lead (TA194)\u003cbr\u003e1 - 4-pin Deutsch Large Breakout Lead DTPxx-4 (TA205)\u003cbr\u003e\u003cem\u003eIgnition\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ COP probe (TA398)\u003cbr\u003e\u003cem\u003eCurrent \u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 60A Compact Current Clamp (TA496)\u003cbr\u003e1 - PicoBNC+ 200A\/2000A AC\/DC Current Clamp (TA388)\u003cbr\u003e1 - Fuse Extension Lead for ATC (TA034)\u003cbr\u003e1 - Fuse Extension Lead for Mini (TA035)\u003cbr\u003e1 - Fuse Extension Lead for JCASE (TA168)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e1 - Multimeter style test probe (black) (TA001)\u003cbr\u003e1 - Multimeter style test probe (red) (TA002)\u003cbr\u003e2 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e2 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e2 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e2 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e1 - Insulation Piercing Test Clip: pack of 2 (TA007)\u003cbr\u003e1 - Electronics Acupuncture Probes (TA008)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e1 - S Hook (Mi168)\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - USB Cable: USB 2.0 blue, 4.5 meters (Mi121)\u003cbr\u003e1 - Carry Case : 4425A Standard (PA209)\u003cbr\u003e\u003cem\u003eTransducer\u003c\/em\u003e\u003cbr\u003e1 - WPS500X pressure transducer (TA071)\u003cbr\u003e1 - Cable: insulated BNC to insulated BNC, 5 meters (TA130)\u003cbr\u003e1 - Exhaust adaptor for WPS500 pressure transducer (TA087)\u003cbr\u003e1 - Vacuum hose for WPS500 pressure transducer (TA085)\u003cbr\u003e1 - Bleed hose for WPS500 pressure transducer (TA086)\u003cbr\u003e1 - Universal vacuum adaptor (TA129)\u003cbr\u003e1 - Vacuum tap for WPS500 (brass) (TA226)\u003cbr\u003e1 - Fuel hose pressure tap: small (brass) (TA235)\u003cbr\u003e1 - Fuel hose pressure tap: medium (brass) (TA236)\u003cbr\u003e3 - Foster 2 series quick couplerfemale to 1\/4 NPT male (TA142)\u003cbr\u003e1 - WPS500 Adaptor Kit B (TA250)\u003cbr\u003e1 - USB Cable: A male to mini 5 pin, 2 meters (TA081)\u003cbr\u003e1 - Carry case: WPS500 compression adaptors (PA094)\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e1 - 24-months - Scope module\u003cbr\u003e1 - 12-months - all other items\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003eTo ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGuided Tests\u003c\/strong\u003e\u003cbr\u003ePico's team of experts have added ten HD-OH specific tests to the PicoScope 7 Automotive Guided Test library. The tests include information and materials to help HD-OH technicians start their oscilloscope diagnostics journey, including guidance on the method and equipment used to complete the test and capture a waveform. With a pre-loaded example waveform for comparison and the scope settings automatically set, there is no more supportive diagnostic tool for your off-highway vehicle diagnosis.\u003cbr\u003eGT903 – Denox 2.2 health check\u003cbr\u003eGT904 – Engine health and performance system test\u003cbr\u003eGT907 – 24V battery starting and charging in parallel\u003cbr\u003eGT908 – 24V battery starting and charging in series\u003cbr\u003eGT909 – Electronically controlled unit injector\u003cbr\u003eGT911 – J1939 serial decoding\u003cbr\u003eGT913 – Common rail pressure hold check. System leak test\u003cbr\u003eGT914 – Relative compression\u003cbr\u003eGT933 – Hydraulic pressure\u003cbr\u003eGT934 – Hydraulic flow\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCase Studies\u003c\/strong\u003e\u003cbr\u003eUse Pico's off-highway kits to open up new markets and opportunities for you.\u003cbr\u003e- \u003ca href=\"https:\/\/www.picoauto.com\/library\/case-studies\/komatsu-pc210-lc-adblue-fault\" target=\"_blank\"\u003eKomatsu PC210 LC | Komatsu PC210 LC AdBlue fault\u003c\/a\u003e\u003cbr\u003e- \u003ca href=\"https:\/\/www.picoauto.com\/library\/case-studies\/wheel-loader-with-loss-of-communication\" target=\"_blank\"\u003eCase 821F | Wheel Loader with Loss of Communication\u003c\/a\u003e\u003cbr\u003e- \u003ca href=\"https:\/\/www.picoauto.com\/library\/case-studies\/iveco-eurocargo\" target=\"_blank\"\u003eIveco Eurocargo\u003c\/a\u003e\u003cbr\u003e- \u003ca href=\"https:\/\/www.picoauto.com\/library\/case-studies\/daf-def-warnings\" target=\"_blank\"\u003eDAF CF | DAF DEF warnings\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_27324.jpg?v=1689079241\" style=\"width: 599px; height: 1003px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667653747001,"sku":"pt-PQ331","price":5256.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/pt-PQ331_09671d72-451a-4984-94ec-2211660ddf9b.webp?v=1759356190"},{"product_id":"picoscope-4-channel-off-highway-elite-kit","title":"Picoscope 4-Channel Off-Highway Elite Kit","description":"\u003cp\u003eCreated for fault diagnosis on trucks, tractors, forklifts, boats, combine harvesters, excavators and more, the PQ324 off-highway kit open up new markets and opportunities for you. The successful application of Pico products to these vehicles has been widely demonstrated by the many related case studies published on our website and in newsletters, as well as by a growing HD-OH support forum and community.\u003c\/p\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.aeswave.com\/images\/products\/22258.png?1586974906\" style=\"height: 125px; width: 500px;\"\u003e\u003c\/p\u003e \u003cp\u003eThe kits contain a modified PS4425A PicoScope having additional protection to better withstand off-highway conditions. The included accessories help users quickly connect and easily carry out non-intrusive and non-invasive measurements on a wide variety of systems and components found in these vehicles.\u003c\/p\u003e \u003cp\u003eIn support of the new off-highway kits, Pico will be releasing an initial set of ten HD-OH guided tests in the PicoScope software. The tests include information and materials to help HD-OH technicians start their oscilloscope diagnostics journey. Specifically, the tests cover 24 V battery, Bosch Denoxtronic, J1939 communications, engine and hydraulic system and component testing.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePicoScope 4425A Hardware\u003c\/strong\u003e\u003cbr\u003e The PicoScope 4425A scope module includes the features that make PicoScope hardware the most powerful and versatile automotive scope:\u003cbr\u003e • ±200 V to ±50 mV input ranges with floating inputs\u003cbr\u003e • Up to 400 M samples\/second (Fast enough for FlexRay, CAN FD etc.)\u003cbr\u003e • 512MB Deep Memory inside the scope (Capture intermittent faults that other scopes miss)\u003cbr\u003e • ConnectDetect® for confirmation of good contact\u003cbr\u003e • USB2 or USB3 connectivity to PC\u003cbr\u003e • Hardware frequency coupling\u003cbr\u003e • Hardware \u0026amp; software triggers and filters\u003cbr\u003e • NVH (Noise, Vibration \u0026amp; Harshness) diagnostics\u003cbr\u003e • Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e • Compatible with Pico NVH interfaces. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePicoScope Software\u003c\/strong\u003e\u003cbr\u003e Pico has continuously upgraded and improved their Windows-based automotive software for over 20 years. Beginning with PicoScope 7, it is optimized for touchscreen\/tablet devices and will become compatible with Linux and macOS. With PicoScope software you can:\u003cbr\u003e • Set up your scope quickly with over 150 guided tests (10 New HD-OH specific tests)\u003cbr\u003e • Auto-configure PicoBNC+™ probes \u003cbr\u003e • See your waveforms in high definition and with minimal delay.\u003cbr\u003e • Evaluate your waveforms with powerful tools: Math channels, Masks\/Alarms, Serial Decoding, Rotation\/Phase markers (eg 720 degree rotation)\u003cbr\u003e • Save and share your waveforms\u003cbr\u003e • Exclusive access to the Pico Waveform Library with over 5500 entries.\u003cbr\u003e • PicoDiagnostics for NVH, Cylinder compression, battery, alternator and starter testing, cylinder misfires \/ balance\u003cbr\u003e • Get free updates for PicoScope Automotive software with no subscriptions or in-app purchases.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e 1 - Pico 4425A 4-channel scope module (PR347)\u003cbr\u003e \u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e 1 - PicoBNC+ 5-meter Test Lead: Blue, 4mm permanent ground (TA475)\u003cbr\u003e 1 - PicoBNC+ 5-meter Test Lead: Red, 4mm permanent ground (TA476)\u003cbr\u003e 1 - PicoBNC+ 5-meter Test Lead: Green, 4mm permanent ground (TA477)\u003cbr\u003e 1 - PicoBNC+ 5-meter Test Lead: Yellow, 4mm permanent ground (TA478)\u003cbr\u003e 2 - PicoBNC+ 10:1 scope probe (TA499)\u003cbr\u003e 1 - PicoBNC+ Resistance Test Lead(TA432)\u003cbr\u003e 1 - PicoBNC+ Wide-Range Linear Temperature Probe (TA395)\u003cbr\u003e 2 - 2-pin Breakout Lead (TA012)\u003cbr\u003e 2 - 2-pin ACS Breakout Lead (TA190)\u003cbr\u003e 2 - 2-pin Deustsch DTxx-2 (TA192)\u003cbr\u003e 1 - 3-pin AMP Superseal Breakout Lead (TA267)\u003cbr\u003e 1 - 3-pin Kostal Breakout Lead (TA191)\u003cbr\u003e 1 - 4-pin Deutsch Large Breakout Lead DTxx-4 (TA193)\u003cbr\u003e 1 - 2-pin Kostal Breakout Lead (TA194)\u003cbr\u003e 1 - 4-pin Deutsch Large Breakout Lead DTPxx-4 (TA205)\u003cbr\u003e \u003cem\u003eIgnition\u003c\/em\u003e\u003cbr\u003e 1 - PicoBNC+ COP probe (TA398)\u003cbr\u003e \u003cem\u003eCurrent \u003c\/em\u003e\u003cbr\u003e 1 - PicoBNC+ 60A Compact Current Clamp  (TA496)\u003cbr\u003e 1 - PicoBNC+ 60A AC\/DC Current Clamp  (TA473)\u003cbr\u003e 1 - PicoBNC+ 200A\/2000A AC\/DC Current Clamp  (TA388)\u003cbr\u003e 1 - Fuse Extension Lead for ATC (TA034)\u003cbr\u003e 1 - Fuse Extension Lead for Mini (TA035)\u003cbr\u003e 1 - Fuse Extension Lead for JCASE (TA168)\u003cbr\u003e \u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e 1 - Multimeter style test probe (black) (TA001)\u003cbr\u003e 1 - Multimeter style test probe (red) (TA002)\u003cbr\u003e 2 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e 2 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e 2 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e 2 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e 2 - Insulation Piercing Test Clip: pack of 2 (TA007)\u003cbr\u003e 1 - Electronics Acupuncture Probes (TA008)\u003cbr\u003e \u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e 1 - S Hook (Mi168)\u003cbr\u003e 1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e 1 - USB Cable: USB 2.0 blue, 4.5 meters (Mi121)\u003cbr\u003e 1 - Carry Case : 4425A Standard (PA209)\u003cbr\u003e \u003cem\u003eTransducer\u003c\/em\u003e\u003cbr\u003e 1 - WPS500X pressure transducer  (TA071)\u003cbr\u003e 2 - WPS600C pressure transducer  (TA091)\u003cbr\u003e 3 - Cable: insulated BNC to insulated BNC, 5 meters (TA130)\u003cbr\u003e 1 - Exhaust adaptor for WPS500 pressure transducer (TA087)\u003cbr\u003e 1 - Vacuum hose for WPS500 pressure transducer (TA085)\u003cbr\u003e 1 - Bleed hose for WPS500 pressure transducer (TA086)\u003cbr\u003e 1 - Universal vacuum adaptor (TA129)\u003cbr\u003e 1 - Vacuum tap for WPS500 (brass) (TA226)\u003cbr\u003e 1 - Fuel hose pressure tap: small (brass) (TA235)\u003cbr\u003e 1 - Fuel hose pressure tap: medium (brass) (TA236)\u003cbr\u003e 3 - Foster 2 series quick couplerfemale to 1\/4 NPT male (TA142)\u003cbr\u003e 1 - WPS500 Adaptor Kit B (TA250)\u003cbr\u003e 3 - USB Cable: A male to mini 5 pin, 2 meters (TA081)\u003cbr\u003e 1 - Carry case: WPS500 compression adaptors (PA094)\u003cbr\u003e 1 - Carry case: Dual WPS600 small case (PA156)\u003cbr\u003e \u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e 1 - 24-months - Scope module\u003cbr\u003e 1 - 12-months - all other items\u003c\/p\u003e \u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003e To ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGuided Tests\u003c\/strong\u003e\u003cbr\u003e Pico's team of experts have added ten HD-OH specific tests to the PicoScope 7 Automotive Guided Test library. The tests include information and materials to help HD-OH technicians start their oscilloscope diagnostics journey, including guidance on the method and equipment used to complete the test and capture a waveform. With a pre-loaded example waveform for comparison and the scope settings automatically set, there is no more supportive diagnostic tool for your off-highway vehicle diagnosis.\u003cbr\u003e GT903 – Denox 2.2 health check\u003cbr\u003e GT904 – Engine health and performance system test\u003cbr\u003e GT907 – 24V battery starting and charging in parallel\u003cbr\u003e GT908 – 24V battery starting and charging in series\u003cbr\u003e GT909 – Electronically controlled unit injector\u003cbr\u003e GT911 – J1939 serial decoding\u003cbr\u003e GT913 – Common rail pressure hold check. System leak test\u003cbr\u003e GT914 – Relative compression\u003cbr\u003e GT933 – Hydraulic pressure\u003cbr\u003e GT934 – Hydraulic flow\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCase Studies\u003c\/strong\u003e\u003cbr\u003e Use Pico's off-highway kits to open up new markets and opportunities for you.\u003cbr\u003e - \u003ca href=\"https:\/\/www.picoauto.com\/library\/case-studies\/komatsu-pc210-lc-adblue-fault\" target=\"_blank\"\u003eKomatsu PC210 LC | Komatsu PC210 LC AdBlue fault\u003c\/a\u003e\u003cbr\u003e - \u003ca href=\"https:\/\/www.picoauto.com\/library\/case-studies\/wheel-loader-with-loss-of-communication\" target=\"_blank\"\u003eCase 821F | Wheel Loader with Loss of Communication\u003c\/a\u003e\u003cbr\u003e - \u003ca href=\"https:\/\/www.picoauto.com\/library\/case-studies\/iveco-eurocargo\" target=\"_blank\"\u003eIveco Eurocargo\u003c\/a\u003e\u003cbr\u003e - \u003ca href=\"https:\/\/www.picoauto.com\/library\/case-studies\/daf-def-warnings\" target=\"_blank\"\u003eDAF CF | DAF DEF warnings\u003cbr\u003e \u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cimg alt=\"Picoscope Off-Highway Guide Tests\" src=\"https:\/\/www.aeswave.com\/images\/products\/27324.jpg?1671151438\" style=\"width: 599px; height: 1003px;\"\u003e\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":45667653812537,"sku":"PT-PQ332","price":7807.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/picoscope_4-channel_off-highway_elite_kit_pt-pq332_1.webp?v=1744238909"},{"product_id":"2-channel-pico-4225a-starter-diagnostic-kit-pq175-copy-1","title":"2-Channel Pico 4225A STARTER Diagnostic Kit (PQ175) LIKE NEW","description":"\u003cp\u003eLIKE NEW\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"320\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/850UroANtds?rel=0\u0026amp;showinfo=0\u0026amp;ecver=2%22style=%22position:absolute;width:100%25;height:100%25;left:0\" width=\"599\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eThe Pico PQ175 STARTER Diagnostic Kit includes the 4225A Picoscope module, two PicoBNC+™ test leads and a few accessories. The 4225A uses PicoScope Automotive software which is updated continuously with no subscription costs or in-app purchases. This kit offers a cost-friendly beginning for technicians beginning their PicoScope journey and for those who want to upgrade to the 4425A.\u003c\/p\u003e\n\u003cp\u003eThe 4225A generation of Picoscope utilizes PicoBNC+™ that provides smart probe interfacing, powered probes, and status lights on each channel, as well as full compatibility with your existing PicoScope or third-party BNC probes.\u003c\/p\u003e\n\u003cp\u003eThe unique capabilities and characteristics of the PicoBNC+™ include:\u003cbr\u003e• Push to connect, does not require a twist like old-fashioned BNC connectors. \u003cbr\u003e• Identifies the probe to PicoScope software which will auto-configure for that specific probe.\u003cbr\u003e• Provides power from the scope module to the probe, great for overnight battery drain tests! \u003cbr\u003e• Will Auto-zero current clamps and other probes.\u003cbr\u003e• Includes bright status lights for each channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope 4225A Hardware\u003c\/strong\u003e\u003cbr\u003eThe PicoScope 4225A scope module includes the features that make PicoScope hardware the most powerful and versatile automotive scope:\u003cbr\u003e• ±200 V to ±50 mV input ranges with floating inputs\u003cbr\u003e• Up to 400 M samples\/second (Fast enough for FlexRay, CAN FD etc.)\u003cbr\u003e• 512MB Deep Memory inside the scope (Capture intermittent faults that other scopes miss)\u003cbr\u003e• ConnectDetect® for confirmation of good contact\u003cbr\u003e• USB2 or USB3 connectivity to PC\u003cbr\u003e• Hardware frequency coupling\u003cbr\u003e• Hardware \u0026amp; software triggers and filters\u003cbr\u003e• NVH (Noise, Vibration \u0026amp; Harshness) diagnostics\u003cbr\u003e• Compatible with Pico transducers (WPS500X and WPS600C) and third-party transducers such as the Firstlook.\u003cbr\u003e• Compatible with Pico NVH interfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePicoScope Software\u003c\/strong\u003e\u003cbr\u003ePico has continuously upgraded and improved their Windows-based automotive software for over 20 years. Beginning with PicoScope 7, it is optimized for touchscreen\/tablet devices and will become compatible with Linux and macOS. With PicoScope software you can:\u003cbr\u003e• Set up your scope quickly with over 150 guided tests\u003cbr\u003e• Auto-configure PicoBNC+™ probes \u003cbr\u003e• See your waveforms in high definition and with minimal delay.\u003cbr\u003e• Evaluate your waveforms with powerful tools: Math channels, Masks\/Alarms, Serial Decoding, Rotation\/Phase markers (ex. 720 degree rotation)\u003cbr\u003e• Save and share your waveforms\u003cbr\u003e• Exclusive access to the Pico Waveform Library with over 5500 entries.\u003cbr\u003e• PicoDiagnostics for NVH, Cylinder compression, battery, alternator and starter testing, cylinder misfires \/ balance\u003cbr\u003e• Get free updates for PicoScope Automotive software with no subscriptions or in-app purchases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents of the Pico PQ175 STARTER Diagnostic Kit\u003cbr\u003e\u003cimg alt=\"Contents of the Pico PQ175 STARTER Diagnostic Kit\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/t\/4\/assets\/description_image_22163.png?v=1689077574?1586867172\" style=\"width: 360px; height: 292px;\"\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003ePicoScope Module\u003c\/em\u003e\u003cbr\u003e1 - Pico 4225A 2-channel scope module (PR341)\u003cbr\u003e\u003cem\u003eTest Leads and Breakouts\u003c\/em\u003e\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Blue, 4mm permanent ground (TA404)\u003cbr\u003e1 - PicoBNC+ 3-meter Test Lead: Red, 4mm permanent ground (TA405)\u003cbr\u003e\u003cem\u003eClips, Probes, and Adapters\u003c\/em\u003e\u003cbr\u003e2 - Small crocodile clip (black) (TA003)\u003cbr\u003e2 - Small crocodile clip (red) (TA004)\u003cbr\u003e1 - Battery clip 4mm socket (red) (TA157)\u003cbr\u003e1 - Battery clip 4mm socket (black) (TA158)\u003cbr\u003e2 - Flexible back pinning probe (black) (TA161)\u003cbr\u003e2 - Flexible back pinning probe (red) (TA162)\u003cbr\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003cbr\u003e1 - USB Cable: USB 3.0 blue, 1.8 meters (TA155)\u003cbr\u003e1 - Carton: Large Pico branded (Cardboard) (PA050)\u003cbr\u003e\u003cem\u003eWarranty\u003c\/em\u003e\u003cbr\u003e1 - 24-months - Scope module\u003cbr\u003e1 - 12-months - all other items\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eComputer Requirements\u003c\/b\u003e\u003cbr\u003eTo ensure that PicoScope operates correctly, you must have a computer with at least the minimum system requirements to run your Windows operating system, which must be one of the versions listed in the following table. The performance of the PicoScope will be better with a more powerful PC, and will benefit from a multi-core processor.\u003c\/p\u003e","brand":"Pico Technology","offers":[{"title":"Default Title","offer_id":53319436828985,"sku":"pt-PQ175","price":1161.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/4022\/5593\/files\/2-Channel_Pico_4225A_STARTER_Diagnostic_Kit__PQ175__pt-PQ175_1.webp?v=1744226905"}],"url":"https:\/\/shop.aeswave.com\/es\/collections\/lab-scopes-pico.oembed","provider":"AESwave","version":"1.0","type":"link"}